plottiX ixpress Mini 2 User manual
English 2-11
Deutsch 12-23
2
Safety Instructions ........................................................................................................2-3
In the Box .......................................................................................................................... 4
Overview ........................................................................................................................... 5
Operating Instructions .................................................................................................6-9
FAQ & Declaration of Conformity ..............................................................................10-11
Safety Instructions
Please read this manual carefully before
using the device for the first time. Remove
all packaging before using the device. The
device is intended for household use. If it
is used in an inappropriate manner or in
a manner dierent from that described in
this manual, the manufacturer assumes
no liability and the warranty is void.
Do not pull on the power cord of the
appliance to unplug the device. Always
unplug the device from the power outlet
when not in use.
The device must be used on a flat, stable
and heat-resistant surface. Make sure
that the heat-resistant tray of the transfer
press is also on a stable, flat and heat-re-
sistant surface.
The device is not suitable for persons
whose physical or mental integrity or
their perceptive abilities are limited, or for
persons with insuicient knowledge and
experience.
This product is not suitable for children.
Make sure that the device is not suitable
for playing. Make sure that the device
and the power plug are out of reach for
children under the age of 8 years.
Do not leave the device unattended
while it is connected to the power supply
or has not cooled down (approx. 1 hour
aer use).
Do not use the device if it shows visible
Index & Safety Instructions
3
damage, has been dropped or does not
operate as intended.
Check the power plug and power
cord for any damage or attrition before
using the device. Roll o the power cord
completely before plugging the machine
into the power outlet. The power cord
should not get in contact with sharp ed-
ges or heat sources. Also prevent contact
between cable and pressing surface of the
device. If the power plug or power cord is
damaged, it must be repaired before use.
Do not open the device or other com-
ponents (including the power plug and
cable). Repairs may only be carried out by
authorized workshops.
Never immerse the device in water or
other liquids.
The pressing surface of the device can
reach very high temperatures: Do not
touch it!
Let the device cool down completely
before storing it (approx. 1 hour aer use).
Please keep the user manual for future
reference!
Tip: Keep the original carton. The trans-
fer press is optimally protected in there
and allows a safe transport in case of
warranty.
This device contains raw materials that
can be recycled. Please dispose of this
device in an environmentally friendly
manner at a collection point in your town
or municipality.
Safety Instructions
General
Danger
Symbol
Danger from
hot Surfaces
Danger of
bruises
Plug out the
power cable
WEEE-Reg.No.
DE72497967
4
In the Box
Product size: 111 x 68 x 123mm (LxWxH)
Heating plate size: 6 x 10cm
Product power: 700W
Product voltage: 220V-230V
1 x plottiX iXpress Mini 2
1 x Heat resistant tray
1 x User manual
5
Overview
ON/OFF Power Button
For switching the iXpress Mini 2 heat press
on and o.
Temp-Button
For setting the transmission temperature
and changing the temperature display to
Fahrenheit or Celsius.
Digital Display
Displays the current pressing surface
temperature or the set transfer tempera-
tur (flashing).
Non-stick press surface
Provides dry and even heat für error-free
transfers. With non-stick coating for ad-
ditional smoothness and durability.
Heat resistant tray
Storage space for the iXpress Mini 2 heat
press when you are not using it or when
the machine is heating up.
6
Operating Instructions
1Place the press on the heat resistant tray.
Note:
Unplug the device from the power outlet when not in use.
Insert the power plug into the socket.
Make sure that the mains voltage of the socket corre-
sponds to the specified voltage of the iXpress Mini 2.
2
3Press the ON/OFF Power Button to switch on the press. A
signal tone sounds and the symbols of the ON/OFF Power
Button and the Temp-Button start to light up red. The
digital display now shows the current temperature of the
press surface.
7
To set the desired transmission temperature, press the
Temp-Button. The currently set transmission tempera-
ture starts to flash in the digital display. Now press the
Temp-Button repeatedly until the temperature you want
is displayed.
Operating Instructions
4
Warning:
Please note that the Transfer Press heats up accordingly
to set temperature. Risk of burns by touching.
You can set the following temperatures:
100 / 125 / 130 / 140 / 145 / 150 / 155 / 165 / 170 / 185 / 205°C
Caution: If other values are displayed here, your heat press show the temperature in Fah-
renheit instead of Celsius. If you want to change the display to Celsius, press the Temp
key for 8 seconds. As soon as a „C“ for Celsius lights up on the digital display, you have
successfully changed the displayed temperature.
Wait for 3 seconds to save the selected transfer temperature automatically. The digital
display shows the current temperature of the pressing surface again.
As soon as the set transfer temperature is reached, a signal tone sounds three times and
the Temp-Button symbol lights up green.
8
Operating Instructions
5If you want to press a textile, please prepressed it for 3-5
seconds to remove wrinkles and moisture. Make sure that
the textile is placed on a suitable base, for example on a
silicone mat for transfer presses.
Position the design to be transferred on the desired
surface.
6
7Now press the iXpress Mini 2 onto your design - To increa-
se the pressure, place both hands on top of each other on
the heat press and lean slightly over the device.
Please note that depending on the manufacturer, the
temperature and pressing time may vary.
9
Place the iXpress Mini 2 back on the heat resistant tray.
Press the ON/OFF Power Button to switch o the press. As
soon as the signal tone sounds twice and all displays are
o, the press is switched o.
Caution: If you do not use the iXpress Mini 2 for more than
10 minutes, it switches o automatically.
Operating Instructions
8
Note:
Unplug the device from the power outlet when not in use.
Need help?
You can find temperatures and pressing times for all
plottiX iron-on foils on:
www.plottix.de/en/help/
10
Q: What are the tips for successful transfers with iXpress Mini 2 Transfer Press?
A: Three things are important for perfect transfers that last:
1. A firm, even surface. Kitchen islands, countertops, or sturdy tables work well. Ironing
boards and plastic tables are not sturdy enough for successful transfers. We also suggest
the use of our silicone mat.
2. Use the recommended settings for the iron-on and base material you‘re using.
3. Make sure you apply firm pressure during transfer.
Q: I followed the instructions, and my iron-on didn’t stick. What happened? How do I
get it to work?
A: The most common reasons for your images not sticking:
1. The press did not make full contact with the base material. This could be because of
seams, zippers, or anything else that will cause you to not have an even surface.
2. Verify that your machine is set to the recommended settings.
3. Make sure that you choose the recommended pressing time. If the settings are correct
press the front and back of material with heat for an additional 10-15 seconds.
Q: The temperature of the heat press drops when I use it. Is something wrong with my
press?
A: The press temperature may fluctuate briefly aer heating when it is placed on the
base material. This is due to the temperature dierence between the heated plate and
the base material. Do not worry, the heat press will quickly return to the selected setting.
FAQ
Table of contents
Languages:
