Plantronics Marque 2 M180 User manual

Marque 2

M180

User Guide

Contents

What's in the box 3

Headset Overview 4

Pair 5

Get Paired 5

Pair another phone 5

Charge and ﬁt 6

Charge 6

Adjust the Fit 6

The Basics 7

Make/Take/End Calls 7

Mute 7

Adjust the Volume 8

Listen to music and more 8

More Features 9

Use two phones 9

Save Power 9

Decipher the Lights 9

Hear it Whisper 9

Disable voice commands 9

Technical Speciﬁcations 10

Support 11

Headset USB charge cable

Earloop Eartips

What's in the box

Power button

Call button

Charge port

Headset LED (indicator light)

/Volume/Mute button

Headset Overview

The ﬁrst time you power on your headset, it begins the pairing process.

1Wearing your headset, power it on. You hear “pairing” and the headset indicator lights flash red

and white.

2Activate Bluetooth®on your phone and set it to search for new devices.

•iPhone®Settings > Bluetooth > On*

•Android™Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

3Select “PLT_M180.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the headset indicator lights stop

flashing.

After pairing your headset to your phone, you may want to pair another phone.

1Power on your headset.

2Press and hold the Call button until you hear "pairing" or the indicator light ﬂashes red and

white.

3Activate Bluetooth on your phone and set it to search for new devices.

4Select “PLT_M180.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the headset indicator lights stop

flashing.

Pair

Get Paired

Pair another phone

Your new headset has enough power to pair and make a few calls. It takes two hours to fully

charge the headset; the indicator light turns off once charging is complete.

The eartip has a thin loop that bends to gently tuck into the contours of either ear.

1Rotate the eartip on the headset or add the optional clip-on earloop to adjust the fit.

2Replace the gel eartip with one of the two alternate sizes, if it feels loose or tight in your ear.

Charge and ﬁt

Charge

Adjust the Fit

Answer a call

Choose:

• Say “answer” after call is announced, or

• Tap the Call button

Answer a second call

First, tap the Call button to put the first call on hold and answer the second call. To switch

between calls, press the Call button for 2 seconds. To end the second call and retrieve the first

call, tap the Call button.

End a call

Tap the Call button to end current call.

Reject a call

Choose:

• Say “ignore” after call is announced, or

• Press Call button for 2 seconds

Redial

To call your last number dialed, double tap the Call button.

Use call waiting

First, tap the Call button to put the first call on hold and answer the second call. To switch

between calls, press the Call button for 2 seconds. To end the second call and retrieve the first

call, tap the Call button. Call waiting does not work between two paired phones.

Voice dial (phone feature)

If your smartphone has a voice-enabled assistant, press the Call button for 2 seconds and wait

for phone prompt.

You can mute the microphone during a conversation.

The Basics

Make/Take/End Calls

Mute

During a call, tap the Volume/Mute until you hear “mute on” or “mute off.” While the

microphone is muted, an alert repeats every 15 minutes.

Tap the Volume/Mute button to cycle through preset levels.

If your phone also has the Bluetooth A2DP (Advanced Audio Distribution Proﬁle) stereo music

feature, then your music, podcasts, favorite Internet radio and other streaming audio can be

heard through this headset.

Adjust the Volume

Listen to music and more

Multipoint technology lets you pair a second phone and answer calls from either phone.

Once you have paired your two phones, it's easy to answer calls from either phone.

When on a call, you will hear a ringtone notification of the incoming call from the second paired

phone. To answer a second call from the other phone, you must end the current call (tap Call

button) so the new call automatically answers.

If you choose to not answer the second call, it will go to voicemail.

If you leave your headset powered on but out of range of your paired phone for more than 90

minutes, your headset will conserve its battery power by entering into a DeepSleep™mode.

Once back in range with your phone, tap the Call button to exit DeepSleep mode. If your phone

is also ringing, tap the Call button again to answer your call.

Your headset has an indicator light that ﬂashes in response to a change in status or after a

button press.

Some examples of what you will see are:

• Solid red until charging complete and then off

• Flashing red and white during pairing

• Triple red ﬂash when less than 10 minutes of talk time

• Triple white ﬂash at incoming call

Your headset tells you about status changes. For example:

“Power on”

“Pairing successful”

“Talk time (x) hours”

“Mute on”

“Lost connection”

“Recharge headset”

This headset speaks and understands English. If you prefer to use the Call button to answer or

reject calls, you can disable the voice commands “answer” or “ignore.”

With the headset powered on, simultaneously press the Call button and Volume (+/–) button

until you see the indicator light ﬂash blue two times. Repeat these steps to reactivate the

commands.

More Features

Use two phones

Save Power

Decipher the Lights

Hear it Whisper

Disable voice commands

Talk time Up to 7 hours*

Standby time Up to 11 days*

Headset weight 7 grams

DeepSleep technology • Activates when paired headset is out of range for over 90

minutes

• Provides up to 180 days* of battery readiness

Multipoint technology Use one headset to answer calls from either of two paired

Bluetooth phones

Charge connector Micro USB charging

Battery type Rechargeable, non-replaceable lithium-ion polymer

Charge time (maximum) 2 hours for full charge

Headset battery meter On-screen for iPhone, enabled by Find MyHeadset™

Bluetooth version v3.0

Bluetooth proﬁles Advanced Audio Distribution Proﬁle (A2DP), Wideband

Hands Free (HFP) Proﬁle 1.6 and Headset (HSP) Proﬁle 1.2

Operating and storage temperature 32°F – 104°F (0 – 40°C)

NOTE * Performance is dependent upon battery and may vary by device.

Technical Speciﬁcations

Table of contents

Other Plantronics Headset manuals

Plantronics

Plantronics C565 User manual

Plantronics

Plantronics Savi W740 Installation guide

Plantronics

Plantronics Voyager 5200 UC User manual

Plantronics

Plantronics AP15 User manual

Plantronics

Plantronics MX250 User manual

Plantronics

Plantronics Savi Office Reference guide

Plantronics

Plantronics RIG User manual

Plantronics

Plantronics S12 User manual

Plantronics

Plantronics MX200 Reference guide

Plantronics

Plantronics Blackwire C310 User manual

Plantronics

Plantronics T10 User manual

Plantronics

Plantronics M3000 User manual

Plantronics

Plantronics Savi W440-M User manual

Plantronics

Plantronics Voyager User manual

Plantronics

Plantronics CS60 START GUIDES User manual

Plantronics

Plantronics ENCOREPRO 710 DIGITAL User manual

Plantronics

Plantronics SB2010 Reference guide

Plantronics

Plantronics M2300 Reference guide

Plantronics

Plantronics Vista M22 Amplifier User manual

Plantronics

Plantronics Savi 445 User manual

Plantronics

Plantronics Blackwire 225 User manual

Plantronics

Plantronics VOYAGER 510 User manual

Plantronics

Plantronics M3000 User manual

Plantronics

Plantronics Savi 440 User manual

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Jabra

Jabra FR 20 user guide

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

Jabra

Jabra PRO 9460 Duo datasheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

Jabra

Jabra Steel quick start guide

HyperX

HyperX cloud ii quick start guide

Southwing

Southwing SA505 Specifications