Plantronics Marque 2 M165 User manual

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

User Guide

Marque 2™

M165™

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

Contents

What’s in the box 3

Headset overview 4

Pairing 5

Pair ﬁrst time 5

Pair another phone 5

Charge 6

Fit 7

Adjust the ﬁt 7

The basics 8

Make/take/end calls 8

Mute 8

Adjust the volume 8

Stream audio 8

More features 9

Save power 9

Decipher the lights 9

Hear it whisper 9

Disable voice commands 9

Speciﬁcations 10

Support

Car charger

Combo cable chargerHeadset

Earloop

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

What’s in the box

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

Headset overview

Power button

Call button

Charge port

Headset LED (indicator light)

/Volume/mute button

Be safe! Please read the safety guide for important safety, charging,

battery and regulatory information before using your new headset.

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

Pairing

The ﬁrst time you switch on your headset it begins the pairing process.

1 Place the headset on your ear and turn it on.

2 While the headset LEDs are ﬂashing red and white, activate Bluetooth® on your phone

and set it to search for new devices.

 • iPhone:Settings>General>Bluetooth>On

 • Android™Smartphones:Settings>Wireless&Networks>Bluetooth:On>Scanfordevices

 NOTEMenus may vary by device.

3 Select “PLT_M165.”

4 If your phone asks, enter four zeros (0000) for the passcode or accept the connection.

The indicator light stops ﬂashing red and white once successfully paired.

Multipoint technology lets you pair a second phone and answer calls from either phone.

1 Power on your headset.

2 Press and hold the Call button until the indicator light ﬂashes red and white or you

hear “pairing.”

3 While the indicator light ﬂashes red and white, activate Bluetooth on your phone and set

it to search for new devices.

4 Select “PLT_M165.”

5 If your phone asks, enter four zeros (0000) for the passcode or accept the connection.

The indicator light stops ﬂashing red and white once successfully paired.

Pair ﬁrst time

Pair another phone

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

Charge

Your new headset has enough power to pair and make a few calls. It takes two hours to fully

charge the headset; the indicator light turns off once charging is complete.

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

Fit

The universal-ﬁt eartip has a thin loop that bends to gently tuck into the contours of either

ear. Rotate the eartip on the headset or add the optional clip-on earloop to adjust the ﬁt.

Adjustthet

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

The Basics

Answeracall

Choose:

 • Say“Answer”aftercallisannounced,or

 • TaptheCallbutton

 Answerasecondcall

First, tap the Call button to end current call, then tap the Call button again to answer

new call.

 Endacall

Tap the Call button to end current call.

 Rejectacall

Choose:

 • Say“Ignore”aftercallisannounced,or

 • PressCallbutton for 2 seconds

 Callbacklastcall

To dial your last number you dialed, double-tap the Call button .

 Voicedial(phonefeature)

Press the Call button for 2 seconds, wait for phone prompt and then tell the phone

to dial the name of a stored contact.

You can mute the microphone during a conversation.

During a call, tap the Volume / Mute /until you hear “mute on” or “mute off.”

While the microphone is muted, an alert repeats every 15 minutes.

Tap the Volume / Mute /button to cycle through preset levels.

Streaming audio is controlled using your phone, but when a call rings, the audio

automatically pauses to allow you to answer or ignore the call. Once the call is ignored

or ends, the streaming audio is resumed.

Make/take/endcalls

Mute

Adjustthevolume

Stream audio

If you leave your headset powered on but out of range of your paired phone for more than 90

minutes, your headset will conserve its battery power by entering into a DeepSleep™mode.

Once back in range with your phone, tap the Call button to exit DeepSleep mode. If your

phone is also ringing, tap the Call button again to answer your call.

Your headset has an indicator light that ﬂashes in response to a change in status or after

a button press.

Some examples of what you will see are:

 • Solidreduntilchargingcompleteandthenoff

 • Flashingredandwhiteduringpairing

 • Tripleredashwhenlessthan10minutesoftalktime

 • Triplewhiteashatincomingcall

Your headset tells you about status changes in English. For example:

 • “Poweron”

 • “Pairingsuccessful”

 • “Talktime(x)hours”

 • “Muteon”

 • “Lostconnection”

 • “Rechargeheadset”

This headset only speaks and understands English. If you prefer to use the Call button

to answer or reject calls, you can disable the voice commands “Answer” or “Ignore.”

With the headset powered on, simultaneously press the Call and Volume buttons until

you see the indicator light ﬂash white two times. Repeat these steps to reactivate

the commands.

Simply check the Headset battery meter on your iPhone (automatically displayed) or

Android smartphone (enabled by the MyHeadset™or Find Myheadset™apps)

Save power

Decipherthelights

Hear it whisper

Disablevoicecommands

Checkingbatterylevel

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

More features

This version of the wordmark can only be

used at this size. It has a larger registration

mark than the other size wordmarks.

Please use one of the other sizes if you need

a larger version.

Specifications

Talktime Up to 7 hours

Standbytime Up to 11 days

Headset weight 7 grams

DeepSleeptechnology • Activateswhenpairedheadsetisoutofrangefor

over 90 minutes

• Providesupto180days*ofbatteryreadiness

Multipointtechnology Use one headset to answer calls from either of two

paired Bluetooth phones

Charge connector Micro USB charging

Batterytype Rechargeable non-replaceable lithium ion polymer

Chargetime(maximum) 90 minutes for full charge

Headsetbatterymeter On-screen for iPhone. Enabled by MyHeadset™or

Find MyHeadset™apps for Android smartphones

Bluetoothversion Bluetooth v3.0

Bluetoothproles Advanced Audio Distribution Proﬁle (A2DP), Wideband

Hands Free (HFP) Proﬁle 1.6 and Headset (HSP)

Proﬁle 1.2

Operatingtemperature 0 – 40°C (32°F – 104°F)

NOTEPerformance is dependent upon battery and may vary by device.

Other manuals for Marque 2 M165

Table of contents

Other Plantronics Headphones manuals

Plantronics

Plantronics BLACKWIRE C210-M User manual

Plantronics

Plantronics BackBeat SENSE User manual

Plantronics

Plantronics Blackwire C610 User manual

Plantronics

Plantronics BackBeat 500 SERIES User manual

Plantronics

Plantronics BackBeat GO 600 User manual

Plantronics

Plantronics Stereo SupraPlus USB User manual

Plantronics

Plantronics Voyager PRO UC v2 User manual

Plantronics

Plantronics BackBeat GO 410 Series User manual

Plantronics

Plantronics DISCOVERY 925 User manual

Plantronics

Plantronics Backbeat Go 2 User manual

Plantronics

Plantronics DISCOVERY 925 User manual

Plantronics

Plantronics BackBeat 100 series User manual

Plantronics

Plantronics HW251 liGo User manual

Plantronics

Plantronics Voyager 100 Series User manual

Plantronics

Plantronics Backbeat FIT User manual

Plantronics

Plantronics BackBeat PRO 5100 User manual

Plantronics

Plantronics BackBeat SENSE User manual

Plantronics

Plantronics Backbeat Go 2 User manual

Plantronics

Plantronics Voyager PRO UC v2 User manual

Plantronics

Plantronics BackBeat 100 series Specification sheet

Plantronics

Plantronics BACKBEAT 116 Specification sheet

Plantronics

Plantronics Stereo SupraPlus USB Reference guide

Plantronics

Plantronics BackBeat 903+ Technical manual

Plantronics

Plantronics BackBeat 116 User manual

Popular Headphones manuals by other brands

Sony

Sony MDR-NC8 Specifications

AUSounds

AUSounds AU-Stream quick start guide

ENERGY SISTEM

ENERGY SISTEM Style 7 user manual

Philips

Philips SHE3622 Specifications

Insignia

Insignia NS-CAHBTSPORT quick start guide

Movie Vision

Movie Vision HP-400 Operation manual

MobiFren

MobiFren SM Pro user guide

Motorola solutions

Motorola solutions PMLN8120 user manual

Jaybird

Jaybird freedom Faq

Sony

Sony MDR-ED12LP manual

HiFuture

HiFuture Tidy Buds Pro user manual

Creative

Creative CB2530 user guide

Renkforce

Renkforce RF FTVK-100 operating instructions

Philips

Philips SHQ3000 Specifications

Sennheiser

Sennheiser 500371 instruction manual

Califone

Califone 2924AV Specifications

Philips

Philips EARGEAR HE205 Series Specifications

Technics

Technics EAH-AZ80 manual