Planika GaLiO Insert #2 User manual

INSTALLATION MANUAL

GaLiO Insert #2

G20/G25 (Natural Gas) G30/G31 (Propane-Butane/Propane)

Manufactured by

Planika Sp. z o.o.

Bydgoska 38

86-061 Brzoza

Poland

H H1 H H3 L L1 L L3 L4 D D1 D

[mm]

60 58,5

1,5 1 0 10 7

944 43,5 43,5 40 30 05 160

IT IS OBLIGATOR TO READ AND KEEP THIS INSTRUCTION MANUAL.

TABLE OF CONTENTS

1. INTRODUCTION ......................................................................................................................................................... 3

. SAFETY INSTRUCTION ............................................................................................................................................... 3

.1 Safety instruction regarding the use of the gas cylinder .................................................................................. 4

3. INSTALLATION ........................................................................................................................................................... 4

3.1. Box contents ..................................................................................................................................................... 4

4. MONTAGE ................................................................................................................................................................. 6

4.1 Directions of how to design a housing for the fireplace ................................................................................... 8

4.1.1 The insertion variant ..................................................................................................................................... 8

4.1. Montage involving use of adjustable supports ............................................................................................. 9

4. Control panel and gas cylinder montage ........................................................................................................ 11

4.3 Possible housing variants ................................................................................................................................ 15

4.3.1 Situations in which montage of glass screen protection is mandatory ...................................................... 15

4.3. Situations in which the glass screen montage is forbidden. ....................................................................... 15

5. INSTALLATION OF THE GAS LINKAGE ...................................................................................................................... 16

5.1 Natural gas connection ................................................................................................................................... 16

5. Connection and replacement of the gas cylinder (LPG version) ..................................................................... 16

5.3 Adapters for the gas cylinder connection (LPG version) ................................................................................. 18

5.4 Pressure regulator replacement (LPG version) ............................................................................................... 19

6. TECHNICAL SPECIFICATION ..................................................................................................................................... 0

7. MANUFACTURER’S CONTACT DETAILS ................................................................................................................... 1

1. INTRODUCTION

The GaLiO Insert fireplace is a decorative fuel-effect gas appliances intended only for outdoor use. It is obligatory to

acquaint oneself with the below installation manual and user’s manual before committing to the installation and use

of the GaLiO Insert fireplace. This manual is to be kept safe for the lifetime of the device.

2. SAFET INSTRUCTION

•Read the instruction before using the device.

•Use only outdoors.

•The GaLiO Insert is not a free-standing device and is destined to be housed.

•The montage of the device must take into account its trouble-free removal in case of service.

•Do not start up the device before it’s placed safely into the prepared housing.

•The GaLiO Insert fireplace should be installed and controlled annually according to the below installation

manual as well as enforced national and local laws regarding gas safety (installation and use).

•One needs to assess whether the data on the product plaque complies with the local type of gas and pressure.

•Do not change the structure of the device or its sealed elements nor modify the default settings of the GaLiO

Insert fireplace.

•Do not set any additional imitation blocks nor any glowing coal fragments on the burner or in the combustion

chamber.

•A ventilation grid or slot with a ventilation area of 150cm is required at the base of the housing. A device

without the grid or slot for ventilation will function incorrectly causing a threat of damaging the unit or causing

a fire.

•A CO or a powder fire extinguisher needs to be placed near the device.

•During the first ignition the GaLiO Insert fireplace needs to be burnt on maximum level for a few hours in order

for the elements to acquire correct temperature and for the remains of paint, lacquer and lubricant to

evaporate.

•Do not move the device while it’s working.

•The GaLiO Insert fireplace was designed for decorative purposes. The surface of the GaLiO Insert fireplace

(including the optional glass screens) may get hot (up to 100 degrees Celsius). WARNING!: parts of the device

that are easy to reach may be very hot. Keep children away from the device.

•Some variants of housing for the device may require installing additional toughened glass screens (provided

separately).

•Install the fireplace away from flammable materials.

•When the GaLiO Insert fireplace is on it’s not to be exposed to rain.

•When not being used the GaLiO Insert is to be protected from atmospheric conditions and the main valve of

the gas cylinder needs to be turned off.

•All parts of the GaLiO Insert fireplace are made of stain resistant material.

•Never leave a turned on GaLiO Insert without supervision.

•The GaLiO Insert fireplace needs to be installed in a place inaccessible for children, unauthorised persons or

animals for the direct contact with the flame or hot parts of the device to be impossible.

•In case of heavy wind the GaLiO Insert fireplace needs to be immediately turned off and one needs to wait

until the heavy wind passes.

•In case of noticing any sort of gas leaks the fireplace as well as the main valve of the gas cylinder need to be

turned off.

•After use turn off the gas cylinder valve.

2.1 Safety instruction regarding the use of the gas cylinder

•Use only the type of gas and pressure specified by the manufacturer.

•The gas cylinders should always be placed in a vertical position – during use and transport.

•Always store the gas cylinder in an easily accessible place to allow its immediate turn-off.

•During the installation process do not allow an open flame or any ignited object to reach the gas cylinder.

•The gas cylinder should be in a distance not shorter than 1,5 metres away from the GaLiO Insert fireplace.

•Leaks should be found with the use of a cleaning liquid and water. If bubbles form on the surface that means

that a there’s an existing leak.

•Always use a pressure regulator between the gas cylinder and the device. Replace the pressure regulator every

5 years. The allowed pressures are: 30mbar, 37mbar (recommended), 50 mbar. Use only regulators complying

with the European EN161 9 Norm.

•Use only approved and certified gas connection linkage. Replace the linkage every years.

•The elastic linkage connecting gas to the fireplace is to be led away from sharp edges and hot surfaces. Refrain

from bends and twists of the elastic connection on its full length.

•Remember that the LPG bottle should be stored in a well-ventilated place. LPG gas is heavier than air and its

accumulation near the surface may generate an explosive mixture.

•The housing in which the LPG bottle is (optionally) placed needs to have an appropriate ventilation. The

housing needs to have an upper ventilation slot above the top of the bottle (of an area min 1/100 of the area

of the base of the housing) and a lower ventilation slot (of an area min 1/50 of the area of the base of the

housing).

•The gas cylinder needs to be shut if the fireplace is not being used.

•Filling the gas cylinders is to be commissioned to certified gas filling stations.

•Replacement of empty bottles for full ones is to be conducted only in authorized locations.

3. INSTALLATION

3.1. Box contents

•1x complete gas fireplace

•1x Wall Switch

•4x AA Batteries

•4x bag of decorative stones

•1x 4 metre rubber gas linkage – installed (only LPG version)

•1x pressure regulator (37mbar) – installed (only LPG version)

•1x Euro Set (only LPG version)

•1x installation manual

•1x user’s manual

3.2. Unboxing and installation

•The contents of the boxes need to be carefully unwrapped from the foam foil.

•Remove the bags with decorative stones from the burner reservoir and place them away from it.

•Remove the Styrofoam placed on the unit.

•Check the completeness of the elements with the contents list.

•Make sure that the insert nor its elements weren’t damaged during the transportation (if they were, notify

the supplier).

•Install the GaLiO Insert fireplace in the prepared housing made according to the montage specification.

•The decorative stones are to be scattered evenly around the reservoir to completely cover the burner of the

fireplace.

•WARNING!!! The stones may not cover or be placed inside the device protecting the ignition unit. (Photo 1)

Photo 1

•In the case of GaLiO Insert powered with natural gas, to obtain the optimum image of the flame, cover the

burner with a single layer of decorative stones leaving some spaces uncovered of approximately every 10 cm

(Photo ).

Photo 2

•If all the points were completed according to the instruction the gas cylinder can be

now connected.

4. MONTAGE

WARNING!!! All elements above the fireplace need to be made of non-flammable materials.

In accordance with fire safety measures there

should be no flammable objects in direct

contact with the device nor within a 1 metre

radius from the fire. Additionally, Planika

doesn't recommend placing heat-sensitive

objects above the fireplace as it may shorten

their lifetime. Planika will not be responsible

for any damage caused by high temperature

affecting objects installed above the fire.

Non

flammable

materials

Ventilat

on grate or slot with ventilation

area of minimum 150cm2

Non

flammable

materials

The dimensions and shape of the ventilation grid may be designed

according to client specifications

however both the minimum ventilation area of 150 cm as well as minimum distance from the edge

of the housing of 110 minimum need to be observed.

•The dimensions of the housing are to be chosen according to the technical drawings and a ventilation grid or

slot – with ventilation area min 150cm – needs to be placed near the base of the unit, minimally 110 mm

below the burner surface.

•If a hood is placed above the burner it needs to be made of non-flammable materials and a minimum distance

of 60 cm from the surface of the burner needs to be observed. WARNING!!! If the housing is devoid of a

diagonal hood above the burner one needs to remember that all surfaces inside the housing exposed to

contact with hot air need to be made of non-flammable materials.

•It is not permitted to use a device which is not housed in some way.

4.1 Directions of how to design a housing for the fireplace

4.1.1 The insertion variant

•Make the cavity for the insert according to the below outline. When preparing the cavity make sure the surface

on which the insert is placed is well-levelled as there is no option of levelling out the insert.

Ventilat

on grate or slot with ventilation

area of minimum

150cm2

Ventilat

on grate or slot with ventilation

area of minimum

150cm2

•The level difference between the edges of the fireplace cannot exceed mm. Incorrect levelling may cause

incorrect operation of the device and in a worst case scenario, a fire.

4.1.2 Montage involving use of adjustable supports

•In this montage variant the insert is using the help of supports attached to the device. An appropriate space

needs to be provided around the fireplace allowing its trouble-free installation and providing correct

circulation inside the fireplace.

Level the plane of the cavity.

The level deviation must not

exceed 2 mm

Ventilat

on grate or slot with ventilation

area of minimum

150cm2

•Prepare the cavity for the insert according to the below scheme. When preparing the cavity take into account

that the surface on which the insert is going to be placed needs to be well-levelled as the adjustable supports

have a limited range of levelling of the insert. The delivered device is already levelled.

•The edges of the cavity in which the insert is to be placed need to be finished in an aesthetic way as they will be

visible during normal use of the device.

•In case of the cavity being deeper than the height of the device on supports Planika permits a solution where the

device is set on a stable and levelled plinth placed on the bottom of the cavity. The top surface of the plinth should

be H + 10 mm away from the top of the surface of the housing. The ventilation slot or grid must be placed at the

bottom of the housing.

Ventilat

on grate or slot with ventilation

area of minimum

150cm2

Ventilat

on grate or slot with ventilation

area of minimum

150cm2

Other manuals for GaLiO Insert #2

This manual suits for next models

Table of contents

Other Planika Indoor Fireplace manuals

Planika

Planika Pure Flame User manual

Planika

Planika VERSAL Insert Series User manual

Planika

Planika SINATRA 1200 User manual

Planika

Planika PF-0854-0000-000 User manual

Planika

Planika GaLiO Corten User manual

Planika

Planika Rondo Commerce User manual

Planika

Planika Porto User manual

Planika

Planika Misty User manual

Planika

Planika PrimeBox User manual

Planika

Planika PrimeFire 4 User manual

Planika

Planika Pure Flame User manual

Planika

Planika zen high User manual

Planika

Planika Fire Line Automatic 3 User manual

Planika

Planika Prime Fire 700 User manual

Planika

Planika NEO Burner 500 User manual

Planika

Planika Jar User manual

Planika

Planika Rondo Automatic User manual

Planika

Planika Faro KF 22 User manual

Planika

Planika Fire Line Automatic 3 User manual

Planika

Planika Arcticon User manual

Planika

Planika Lincoln User manual

Planika

Planika FORMA 1000 User manual

Planika

Planika GAS-60-023 User manual

Planika

Planika Rock User manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual