Planet WNRT-300 User manual

802.11n Wireless Portable AP/Router

WNRT-300

Quick Installation Guide

Table of Contents

1. Package Contents ................................................. 3

2. Physical Introduction ............................................. 4

3. Hardware Installation ............................................ 5

4.WebUIConguration.......................................... 10

5. Further Information: ........................................... 12

3

1.Package Contents

Thank you for choosing PLANET WNRT-300, the most

convenient portable router. Before installing the router,

please verify the contents inside the package box.

Portable Router Quick Guide CD-ROM

Power Adapter USB Cable Ethernet Cable Li-ion Battery

Note

If there is any item missed or damaged,

please contact the seller immediately.

4

2.Physical Introduction

Top Panel Description

Battery

WAN/LAN

WPS

Power

Wireless

Connection

Front Panel Description

Power Switch

WPS Button

The Switch of Router,

AP and Client Modes.

Rear Panel Description

10/100Mbps WAN/LAN Port

Reset

Power Connector

5V DC Input

5

3.Hardware Installation

Note

Before you start using the portable router,

please follow the procedures below to

install and charge the battery.

Step 1: Remove the battery cover, and insert the

attached battery into the slot. Then replace

the cover back.

Step 2: Charge the battery by the attached power

adapter and USB cable.

Step 3: The red LED will be lit up. When the

battery is fully charged, the LED will be off.

Note

If you will use the WNRT-300 powered by

AC power supply for a long time, please

remove the battery from the slot and keep

it of full power in a cool and dry place.

Please follow the instructions below to activate the

WNRT-300.

STEP 1: When the battery is put into the device, turn

on the WNRT-300.

RT/Client/AP ON/OFFWPS

6

STEP 2: The default operation mode by hardware

switch is Router Mode. Please connect the

Cable/xDSL Modem to RJ-45 port of WNRT-

300 by UTP cable.

RT/Client/AP ON/OFFWPS

STEP 3: Please follow the gure below to connect the

network devices.

Router Mode

Client

N

WNRT-300

N

Cable/xDSL

Modem

Phone Jack

RJ-45RJ-11

SSID: default

WAN

001101010

7

STEP 4: Please use your PC to site survey the wireless

signal of WNRT-300, and connect your PC

with it wirelessly.

*Default SSID: default

*Default Wireless Security: No Security

Note

1. When the WNRT-300 is at Router Mode,

the only RJ-45 port will become a WAN

port. Therefore, you have to configure

it wirelessly. However, if you need to

configure the WNRT-300 by the UTP

cable, please switch it to AP Mode first.

And the RJ-45 port will become a LAN

port to be able to connect with your

computer. The incoming configuration

of AP Mode is the same as well with it

of Router Mode.

8

Note

2. If you cannot obtain an IP address

automatically from WNRT-300, please

refer to the next two figures and follow

the procedures below to referconfigure

the network connection.

Step 1. Click “Start” button located at

lower-left corner of the screen.

Step 2. Click “Control Panel”.

Step 3. Click “Network and Internet

Connections”.

Step 4. Click “Network Connections”.

Step 5. Right-click “Wireless Network

Connection” or “Local Area

Connection”, and choose

“Properties”.

Step 6. Select “Internal Protocol

(TCP/IP)” and click “Proper-

ties” button.

Step 7. Select “Obtain an IP address

automatically” and “Obtain

DNS server address auto-

matically”, then click “OK”.

Please follow the instructions below to congure the

WNRT-300.

9

10

4.WebUIConguration

Default IP Address: 192.168.1.1

Default Username: admin

Default Password: admin

STEP 1: Open the Web browser and enter the default

IP address http://192.168.1.1

The default User name and Password are both

“admin”. Then click OK button to continue.

Other manuals for WNRT-300

1

Table of contents

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

D-Link

D-Link DIR-506L Quick installation guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide