Planet MGSW SERIES User manual
Managed Metro Ethernet Switch
MGSW/MGSD Series
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring DC Power Inputs .............................................................................. 5
4. Terminal Setup ........................................................................................... 6
4.1 Logging on to Console ......................................................................... 7
4.2 ConguringIPAddress......................................................................... 8
4.3 StoringCurrentSwitchConguration..................................................... 9
5. Starting Web Management .........................................................................10
5.1 LoggingintotheManagedMetroSwitch ..............................................10
5.2 SavingConguration...........................................................................13
6. RecoveringBacktoDefaultConguration.....................................................14
7. Customer Support .....................................................................................15
3
1. Package Contents
Thank you for purchasing PLANET L3 and L2+ Managed Metro Ethernet Switches.
Thedescriptionsofthesemodelsareshownbelow:
MGSW-28240F L324-port100/1000BASE-XSFP+4-port10GSFP+Managed
MetroEthernetSwitch
MGSW-24160F L2+16-port100/1000BASE-XSFP+8-portGigabitTPManaged
MetroEthernetSwitch
MGSD-1008F L2+8-port100/1000XSFP+2-port10/100/1000TManaged
MetroEthernetSwitch
“Managed Metro Switch” is used as an alternative name in this Quick
InstallationGuide.
Open the box of the Managed Metro Switch and carefully unpack it. The box
shouldcontainthefollowingitems:
ModelName
Package Item MGSW-28240F MGSW-24160F MGSD-10080F
TheManagedMetroSwitch
QuickInstallationGuide
RJ45 to RS232 Console Cable
Rubber Feet
Two Rack-mounting Brackets
withAttachmentScrews
PowerCord
Dust Caps RJ45 593
SFP 28 16 8
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerialPortConnection(Terminal)
The above workstations come with COM port (DB9) or USB-to-RS232
converter.
The above workstations have been installed with terminal emulator, such as
TeraTerm,PuTTYorHyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheManagedMetroSwitch.
zEthernetPortConnection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explorer 8.0 or above to access
the Managed Metro Switch. If the Web interface of the Managed
Metro Switch is not accessible, please turn off the anti-virus soft-
wareorfirewallandthentryitagain.
5
3. Wiring DC Power Inputs
The Front Panel of the Managed Metro Switch indicates a DC inlet power socket
and consists of one terminal block connector within 6 contacts. Please follow the
steps below to insert the power wire.
1 3 5 7
2 4 6 8
RingPWR
DC 1
Owner
DC 2
Fault
ACTLNK
ACTLNK
1000
100
RESET
10
9
MGSD-10080F
2
1
4
3
6
5
8
7
10
Console
115200,N,8,1
9
100~240V AC
50/60 Hz
ON
AC POWER
OFF
DC POWER
ON
DC Input Range 36V~60V
OFF
Fault
GNDGNDDO 1DO 0DI 1DI 0
DC 2DC 1
V1+ V2+
Figure 3-1: MGSD-10080F Switch Front Panel
100~240V AC
50/60 Hz
ON
OFF
DC POWER
ON
OFF Reset
10 12 14 16
9 11 13 15
18 20 22 24
17 19 21 23
2 4 6 8
1 3 5 7
ACT1000 LNK ACT10/100 LNK
Console
115200, N, 8, 1
18 20 22 24
2Fault
DC1
DC2
PWR
4 6 8 10 12 14 16
17 19 21 23
1 3 5 7 9 11 13 15
MGSW-24160F
Fault
GNDGNDDO1DO0DI 1DI 0
DC 2DC 1
DC Input Range: 36V~60V DC
Please refer to user’s manual before
connect the DC wire.
CAUTION
Figure 3-2: MGSW-24160F Switch Front Panel
100~240V AC
50/60 Hz
ON
AC POWER
OFF
DC POWER
ON
OFF
Ring R.O.
FaultFAN2
FAN1
PWR
DC 2
DC 1
DC Input Range:
36V~60V
2 4 6 8 10 12 14 16 18 20 22 24 26 28
272625242322212019181716151413121110987654321 28
Console
Reset
115200, N, 8, 1
Fault
GNDGNDDO1DO0DI 1DI 0
DC 2DC 1 1 2 3 4
2 4
MGSW-28240F
Figure 3-3: MGSW-28240F Switch Front Panel
Tighten the wire-clamp screws for preventing the wires from loosening.
1 2 3 4 5 6
V1+ V1- V2+ V2-
Power 1 Power 2
Positive(+)Pin Negative(-)Pin
ManagedMetroSwitch Pin 1 / 5 Pin 2 / 6
Note
The wire gauge for the terminal block should be in the range from
12 to 24AWG.
6
4. Terminal Setup
Tocongure the system,connectaserialcableto aCOMport onaPCornotebook
computerandtotheDB9typeofserialportoftheManagedMetroSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Managed Metro Switch Console Connectivity
A terminal program, such as Tera Term or PuTTY, is required to make the software
connectiontotheManagedMetroSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 4-2: COM Port Conguration
7
4.1 Logging on to Console
Oncetheterminalisconnectedtothedevice,powerontheManagedMetroSwitch,
and the terminal will display “running testing procedures”. Then, the following
message asks to log in user name and password. The factory default user name
andpasswordareshownasfollowsandtheloginscreeninFigure4-3appears.
Username:admin
Password:admin
Figure 4-3: Managed Metro Switch Console Login Screen
The user can now enter commands to manage the Managed Metro Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new
passwordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
8
4.2 ConguringIPAddress
TheManagedMetroSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
ShowingtheCurrentIPAddress
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure4-4.
Figure 4-4: IP Information Screen
ConguringIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 4-5.
MGSW-28240F#congureterminal
MGSW-28240F(cong)#interfacevlan1
MGSW-28240F(cong-if-vlan)#ipaddress192.168.1.100 255.255.255.0
Figure 4-5: Conguring IP Address Screen
9
The previous command would apply the following settings for the Managed Metro
Switch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
4.Repeatstep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the Managed Metro Switch will apply the new
IP address setting immediately. You can access the Web interface of the Managed
MetroSwitchthroughthenewIPaddress.
4.3 StoringCurrentSwitchConguration
In the Managed Metro Switch, the running conguration sequence running-cong
can be saved from the RAM to FLASH by “copy” command, so that the running
conguration sequence becomes the start-up conguration le, which is called
congurationsave.
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 4-6: Saving Current Conguration Command Screen
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
10
5. Starting Web Management
The following shows how to start up the Web Management of the Managed
Metro Switch. Note the Managed Metro Switch is congured through an Ethernet
connection. Please make sure the manager PC must be set to the same IP subnet
address.
For example, the default IP address of the Managed Metro Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 5-1: IP Management Diagram
5.1 Logging in to the Managed Metro Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100(thefactorydefaultIPaddressortheonethatyouhave
justchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screen in Figure 5-2 appears.
Other manuals for MGSW SERIES
1
This manual suits for next models
4
Table of contents
Other Planet Switch manuals
Planet
Planet FSD-804PS User manual
Planet
Planet GSW-1601 User manual
Planet
Planet GSD-805 User manual
Planet
Planet IGS-5225 Series User manual
Planet
Planet FGSW-2402RS User manual
Planet
Planet WGS-4215-T User manual
Planet
Planet KVM-1600 User manual
Planet
Planet IKVM-1000 User manual
Planet
Planet IGS-10020M User manual
Planet
Planet GSW-1600HP User manual
Planet
Planet FSD-804P User manual
Planet
Planet VC-412 User manual
Planet
Planet FNSW-1601 User manual
Planet
Planet FSD-808P User manual
Planet
Planet WGSW-52040 User manual
Planet
Planet IGS-6325-4T2X User manual
Planet
Planet IAP-2000PE User manual
Planet
Planet GS-4210 SERIES User manual
Planet
Planet IGS-504HPT User manual
Planet
Planet FSD-1600 User manual
