Planet DKVM-1708 User manual
1
DKVM-1708/1716
17" LCD Drawer KVM Console
with 8/16 Port Combo-Free Module
User’s Manual of DKVM-1708/1716
II
opyright
opyright (C) 2013 PLANET Technology Corp. All rights reserved.
he products and programs described in this User’s Manual are licensed products of PLANET
echnology, This User’s Manual contains proprietary information protected by copyright, and this
ser’s Manual and all accompanying hardware, software, and documentation are copyrighted.
o part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to
ny electronic medium or machine-readable form by any means by electronic or mechanical.
cluding photocopying, recording, or information storage and retrieval systems, for any purpose
ther than the purchaser's personal use, and without the prior express written permission of
LANET Technology.
isclaimer
LANET Technology does not warrant that the hardware will work properly in all environments
and applications, and makes no warranty and representation, either implied or expressed, with
respect to the quality, performance, merchanta ility, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims
liability for any inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to nge without notice and does not represent a
commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies
that may be contained in this User’s Manual. PLANET makes no commitment to update or keep
current the information in this User’s Manual, nd reserves the right to make improvements to
this User’s Manual and/or to the products described in this User’s Manual, at any time without
notice.
If you find information in this manual that is leading, or incomplete, we would
appreciate your comments and suggestions.
FCC
This device has been tested and found to com
subject to the following two conditions:
(1) This device may not cause harmful interfere
(2) This device must accept any interference re
he potential effects on the environment and human health as a result of the
/16 Ports Combo-Free Module
odel: DKVM-1708/1716
(January, 2013)
. EM-DKVM-1708/1716_v2.0
C
C
T
T
U
N
a
In
o
P
D
P
b
cha
a
incorrect, mis
ply with Part 15 of the FCC Rules. Operation is
nce
ceived. Including interference that may cause
undesired operation.
CE
This equipment is in compliance with the requirements of the following regulations: EN 55 022:
CLASS A
EEE regulationW
To avo
presen
id t
ce of hazardous substances in electrical and electronic equipment, end users
of electrical and electronic equipment should understand the meaning of the
crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal
waste and have to collect such WEEE separately.
Trademarks
The PLANET logo is a trademark of PLANET Technology. This documentation may refer to
numerous hardware and software products by their trade names. In most, if not all cases, these
designations are claimed as trademarks or registered trademarks by their respective companies.
Revision
User’s Manual for Drawer KVM Console with 8
M
Rev: 2.0
Part No
User’s Manual of DKVM-1708/1716
Safety Instructions
1. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or
sprayed detergent for cleaning. Use moisture sheet or clothe for cleaning.
2. For pluggable equipment, the socked-outlet shall be installed near the equipment and
shall be easily accessible.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
5. Do not leave this equipment in an environment unconditioned, storage temperature
above 60 oC, it may damage the equipment.
6. The opening on the enclosure is for air convection hence the equipment from overheating.
DO NOT COVER THE OPENING.
7. Make sure the voltage of the power source connect the equipment to the power outlet.
8. Please keep the power cord such a way that people can not step on it. Do not place
anything over power cord. The power cord must rate for the voltage and current marked
on the product’s electrical ratings label. The voltage and current rating of the cord should
be greater than the voltage and the current rating marked on the product.
9. All cautions and warning on the equipment should be noted.
10. If the equipment is not in use for long time, disconnect the equipment from mains to avoid
being damaged by transient over-voltage.
11. Never pour any liquid into ventilation openings; this could cause fire or electrical shock.
12. Never open the equipment. For safety reason, qualified service personnel should only
open the equipment.
13. If one of the following situations arises, get the equipment checked by service personnel.
The Power Cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you can not get it work according to
User’s Manual.
The equipment has dropped and damaged.
If the equipment has obvious signs or breakage
III
User’s Manual of DKVM-1708/1716
IV
Index of Contents
.... III
...........IV
mation ............................................................................................................................. 1
................................................................................................ 2
....................................................................... 2
6
nstallation.......................................................................................................................... 6
................. 7
.......................................... 9
. 10
........................................................... 11
1
OSD Function..................................................................................................................... 13
13
13
Safety Instructions..................................................................................................................................
Index of Contents ............................................................................................................................
1. General Infor
1.1 Packing List.................................................................................................................................... 1
1.2 Product Feature...............................
1.3 Features ...................................................................
2. Installation ...........................................................................................................................................
2.1 Before I
2.2 Hardware Kits Contents.................................................................................................
2.3 LCD Components.................................................................................
2.4 Connecting the Console...............................................................................................................
3. OSD Operation.........................................................................
3.1 Panel Controls and LCD OSD Function....................................................................................... 1
3.2 KVM
3.2.1 Manual Key.......................................................................................................................
3.2.2 Hot Key and Mouse Clicking............................................................................................
3.2.3 OSD (On Screen Display) .................................................................................................13
User’s Manual of DKVM-1708/1716
1
1. General Informat
sep
hav
the
no m
The
con
sec
PC
1.1 Pa
The com
One 1.8 m KVM cable. (HDB-15 / VGA + PS/2 x 2)
One 1.8m power cord
One user’s manual CD
One quick installation guide
Two Rack mount bracket kit
One Rack Mount Screw pack
Check to make sure that the unit was not damaged in shipping. If you encounter a
problem, contact your dealer.
Please read this manual thoroughly, and follow the installation and operation
procedures carefully to prevent any damage to the product, and / or any of the
devices that connect to it.
ion
The PLANET DKVM-1708 / DKVM-1716 is the drawer KVM with single-rail
console design offering industrial level input solution, which optimizes your
space utilization by controlling your systems in just 1U space on the rack. The
arate rail design helps users install the KVM console more easily. You don’t
e to prop the heavy console during the installation but just lock the rails into
rack and then pull the KVM console into the rails. Simply use the supplied
Combo VGA cable set to link the ports to the console ports of your KVM switch,
atter whether your connected port interface be either USB or PS/2.
KVM switch modules are loaded with rich features, such as one local
sole port, Daisy chain capability, On Screen Display (OSD) menu, Password
urity, Searching PC server name, Hot key control, Push button and
Auto-Scan control, complete keyboard and mouse emulation for simultaneously
boot-up processes.
cking List
plete package consists of:
User’s Manual of DKVM-1708/1716
1.2 Product Feature
2
ouse /
y installed
, easy to install
LCD display and KVM Switch
Cascade controls 128 sets of PCs lly increase)
n. One man can install the KVM console
easily. In case you need to maintain the console, you can easily uninstall without
¾Hardware
Heavy-Duty Electroplate Steel
Supports high resolution up to 1280 x 1024 @ 75Hz
Complies with EIA RS-310C 19” Rack Mount standard
¾System
Supports Combo KVM module to connect servers / KVM via USB & PS/2 connection
Fully supports Logitech / Microsoft / IBM PS/2 mouse / trackball and compatible PS/2 m
trackball
Supports hot plug; not necessary to turn off the original system regardless of a newl
PC or KVM
¾Installation
Single rail design
OSD function for
Supports 6 keyboard languages (continua
1.3 Features
Easy to install
With the unique separate rail desig
effecting the server above or below.
User’s Manual of DKVM-1708/1716
3
odular KVM switches
DKVM-1708/1716 as single port console or through some
simple action and few screws to be 8/16 ports KVM switch.
M
The user can use
User’s Manual of DKVM-1708/1716
4
erful Mouse/Keyboard Support
In the present computer applications, a mouse has become an indispensable
device. The KVM fully supports various models of PS/2 mice manufactured by
Logitech, Microsoft and IBM as well as compatible PS/2 mice of other brands.
The KVM supports the PS/2 Keyboard Port of the CODE SET1/2/3 and further
allows you to use the KVM for all kinds of servers, PCs or their combination.
Various keyboard language support
DKVM-1708/1716 provides multi-Language keyboard support English, Germany,
rench, Italian,Spanish,Chinese.F
Pow
User’s Manual of DKVM-1708/1716
5
1.4 Product Specification
Model Name DKVM-1708 DKVM-1716
Display Size 17 inches
Panel Type 2CCFL LCD Panel
Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA)
Pixel Pitch Supports 0.264(H)x0.264(V)/ 0.294(H)x0.294(V)
Operating System
Windows 98SE/ME/2000/XP/2003/Vista/7 Server,Linux,
Mac OS9/OSX and Sun Microsystems.
Multi Platform Support PS/2 and Combo-Free KVM module
System Cables KVM Cable(Combo-Free) x 1
Keyboard Mouse 105 key PS/2 keyboard with touch pad
Power Source 100 ~ 240V AC input
Touch pad 1000 points/ inch(40 points/mm)-graphics tablet mode
Mouse resolution 300 DPI
Video: 8 HDB-15 female Video: 16 HDB-15 female
KVM Switch Module PC
Connectors KB/MS: PS/2 & USB signal combined
Temperature
Operate: 5 ~ 40 Degree C / 41 ~ 104 Degree F
Storage: -20 ~ 60 Degree C / -4 ~ 140 Degree F
Humidity 0% ~ 80% RH
Chassis Construction Heavy duty steel materials
Keyboard Language* Multi-Language keyboard support English, Germany, French,
Italian,Spanish,Chinese(Default: English)
Certification CE / FCC
User’s Manual of DKVM-1708/1716
6
allation
check all p ing the list before installation. To make
ng process. If
ountered an
lation en
d brac ance means front bracket
t) cab d longer rear brackets.
binet de ontact your dealer
tretch rails
or ck-mounted equipment should be maintained.
ply co ect
ons to the
and con ese devices
from falling down e people hurt
he console d
2. Installation
2.1 Before Inst
1. Please eripherals accord
sure of the whole unit was not damaged and lost during shippi
you enc y problem, please contact your dealer.
2. Before instal , make sure all peripherals and computer have be
turned off.
3. The standar kets are for 500 ~ 800 mm (dist
to rear bracke inet, contact your dealer if you nee
4. If your ca pth is above 800 to 1000 mm, please c
for the s and replace it for your demand.
5. Reliable access ies of ra
Particular attention s
connecti
hould be given to sup nnections other than dir
branch circuit.
6. The KVM sole are a little bit heavy, please prevent th
during the installation. That may make som
and t amage.
This manual suits for next models
1
Table of contents
Other Planet LCD Drawer manuals
Popular LCD Drawer manuals by other brands
Acnodes
Acnodes KD 8228 user manual
Ameriwood
Ameriwood 9524328PCOM manual
Kesseböhmer
Kesseböhmer TANDEM solo Mounting instructions
Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series user manual
APW Wyott
APW Wyott Ease Extreme HDX-1-120 Installation and operating instructions
NTI
NTI RACKMUX-V17-N Installation and operation manual
GRASS
GRASS DWD XP manual
StarTech.com
StarTech.com DuraView RACKCONS1701 instruction manual
Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S installation instructions
Synergy Global Technology
Synergy Global Technology LCD1U17-44 user manual
Fujitsu
Fujitsu RC25 user manual
Acnodes
Acnodes RK 1000B installation guide