Planet VIP-152T User manual

Trademarks

Contents subject to revise without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trade-

marks belong to their respective owners.

FCC Warning

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the Instruction manual, may cause harmful inter-

ference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the You will be re-

quired to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause

radio interference, in which case the You may be required to take adequate

measures.

Revision

PLANET IP Phone VIP-152T

QUICK INSTALLATION GUIDE

For model: VIP-152T

Part No.: EMQ-VIP152TV1

Table of Contents

Chapter 1 Overview 1

1.1 Before Startup 1

1.2 Physical Details 1

Chapter 2 Basic Configuration 5

2.1 Initialize VIP-150T 5

Chapter 3 Making calls 11

3.1 IP address call (P2P mode): 11

Chapter 4 Quick reference in CD-ROM guide 15

Chapter 1

Overview

Thank you for purchasing PLANET IP Phone VIP-152T (VIP-152T, in the following terms).

You can now ease the cost of long distance call yet still enjoy the toll voice quality via

Internet.

1.1 Before Startup

Before your rst time start up, please check if the package comes with following items:

• VIP-152T

• Your manual CD

• Quick Installation Guide

• RJ-45 cable

And later, you are required to familiar your environment, your TCP/IP network and your

phone systems.

1.2 Physical Details

1.2.1 Front view and keypad function:

• System Indication LED: When VIP-152T didn t register to Proxy server or

having incoming call, system indication LED will be blinking.

• MENU: Press to enter LCD Menu when in standby mode; if already in LCD

Menu, press this button can return to standby mode

• MUTE:

1. Mute the voice of microphone and let others can’t hear from user in com-

munication.

2. Change input mode to be digit or character mode: When configuration in

LCD menu can change input mode to be input digit only or input character.

• pq: Move to up/down, left/right ; increase/decrease value.

• Flash:

1. Transfer a call. User A can press FLASH button when in communication with

user B, then input phone number can make call to User C, after talk with C,

A can hang up, User B and User C can communicate.

2. Back to upper level of menu: when in LCD Menu, press FLASH button can

jump to upper level of menu.

• REDIAL / HOLD:

1. Redial the last outgoing call or hold one call in communication.

2. Upper-case/Lower-case character: change input character mode to be upper

case or lower case.

• SPEAKER: Speaking without picking up handset.

• 5 Graphic Memory key: User presses these keys to do speed dial according

to phone book data 1-5.

• Number 1 - 10, * and #: The function is as the same as the general phone

set.

• Corresponding list of keypad and symbol:

1 “1”

2 “a” ; “ b” ; “c” ; “2”

3 “d” ; “e” ; “f” ; “3”

4 “g” ; “h” ; “i” ; “4”

5 “j” ; “k” ; “l” ; “5”

6 “m” ; “n” ; “o” ; “6”

7 “p” ; “q” ; “r” ; “s” ; “7”

8 “t” ; “u” ; “v” ; “8”

9 “w” ; “x” ; “y” ; “z” ; “9”

Ü“.” ; “@” ; “_” ; “-” ; “,” ; “!” ; “?” ; “‘” ; “+” ; “$” ; “*”

0 “Space” ; “0”

# “#”

 NOTE:

All function keys mentioned above (except dialing keypad)

are effective only in IP Phone mode.

1.2.2 Rear view

5V DC 5V DC Power input outlet

LAN RJ-45 connector, connected directly to Switch/

Hub through straight CAT-5 cable

PC RJ-45 connector, connected directly to the PC

through straight CAT-5 cable

This page is intentionally left blank

Chapter 2

Basic Configuration

This chapter shows you the starting point of VIP-152T to be integrated into your network

and/or Internet. Conguration steps in this quick guide will be focused on keypad

conguration. More detail conguration, including keypad, web, and telnet instructions

will be illustrated in respective chapters in user's manual.

2.1 Initialize VIP-152T

2.1.1 Start up

Power on VIP-152T, and wait about 15 seconds until VIP-152T nishes boot program

initialization.

Then VIP-152T will come into standby mode: The main LCD screen would be shown as

similar as following. The P2P word means VIP-152T is now in Peer-to-Peer Mode, and

when VIP-152T is connected to SNTP server, on LCD will show current time obtained from

SNTP server.

VIP-152T

P2P 10:10:10 AM

2.1.2 LCD conguration

Most functions may be directly congured via keypad operations in VIP-152T.

You may press ç or è to enter machine conguration menu. The OK button is used to

enter sub menus or conrm settings press FLASH can jump out current menu to previous

level.

Hint

• The REDIAL/HOLD key can be used to switch characters

between capitals and lowercase.

• Press MUTE before input data can switch input mode to

be character mode or IP mode; for example, user wants

to enter IP address, after pressing SPEED can enter digits

directly.

• When user is inputting data, press p will clear previous

input data.

VIP-152T has following conguration menus in the LCD control panel:

1. Call List

2. Forward

3. Phone Book

4. Ringer

5. Network

6. Advanced Set (can be protected by password)

7. Reboot

Please be sure to check and conrm the congurations you ve done. All the modied

parameters should be activated via the Reboot menu.

In this session, we will introduce the main conguration of VIP-152T for you to quickly and

easily establish voice communication.

Hint

• It is suggested to configure the Network settings first,

then you may log in machine via standard web browsers

to complete other machine configurations.

• Machine default IP address: 192.168.0.1

Default username/password: root / no password

2.1.2.1 System Conguration

(i) Call List

User can check all call records in this call list menu.

• Missed Calls:to see all missed calls in message box.

• Received:to see all received calls in message box.

• Dialed No.: to see all dialed numbers in message box.

• Exit: return to upper level of LCD Menu

(ii) Forward Type

There are 3 selections in Forward type, user must select under which condition

to forward calls.

(1) Busy

When VIP-152T is in busy status, the incoming call will be forwarded to the

assigned phone number.

Activate: Enter a forwarded phone number to activate busy forward func-

tion.

Deactivate: Deactivate Busy Forward function.

Exit: Return to upper level of LCD Menu

(2) No Response

When VIP-152T hasn’t been picked up for around 10 seconds, the incom-

ing call will be forwarded to the assigned phone number.

Activate: Enter a forwarded phone number to activate No Answer Forward

function.

Deactivate: Deactivate No Answer Forward function.

Exit: Return to upper level of LCD Menu

(3) Unconditional

It is included the above two types. Whether the VIP-152T is in which sta-

tus, calls will be automatically forwarded to the assigned phone number.

Activate: Enter a forwarded phone number to activate Unconditional

Forward function.

Deactivate: Deactivate Unconditional Forward function.

Exit: Return to upper level of LCD Menu

(4) Delete All: Delete all forward activated data.

The call forward feature can be disabled in this menu.

(5) Exit: Return to upper level of LCD Menu.

(iii) Phone Book

• List: List all records of name, telephone number, and IP address in the

phone address book.

• Edit / Del: Edit or delete a record of name, telephone number, and IP ad-

dress of the phone address book.

• New: Add a new record of name, telephone number, and IP address of the

phone address book.

• Exit: Return to upper level of LCD Menu

(iv) Ringer Settings

• Volume: User can adjust ring volume by press q or p on the keypad to

decrease or increase ringer volume.

• Style: There are three tone styles for VIP-152T. Move the “>” symbol by

press q or p on the keypad to select the tone style preferred, then press

OK to confirm it.

• Exit: Return to upper level of LCD Menu

(v) Network

• Information

User can press q or p to check current network status:

• Mode: Display current network connection mode of VIP-152T to be

Static (Fixed IP), DHCP, or PPPoE.

• IP, Mask, Gateway: display current IP information.

• Get IP Mode

Set network mode of VIP-152T to be Fix (Fixed IP), DHCP, or PoE (PPPoE).

• IP address

Set IP address of VIP-152T.

• Subnet Mask:

Set subnet mask address of VIP-152T.

• Default GW

Set default gateway address of VIP-152T.

• DNS (Domain Name Server)

Set IP address of Domain Name Server. Once VIP-152T can connect to DNS

server, user can set URL address for Proxy server or Phone book instead

of IP address.

(1) Primary

Set Primary DNS server IP address

(2) Secondary

Set Secondary DNS server IP address

(3) Exit: Return to upper level of LCD Menu

PoE Config (PPPoE Configuration)

• User Name

Set PPPoE connection authentication user name.

• Password

Set PPPoE connection authentication password.

• Reconnect

Select ON or OFF to enable or disable this function. If user enables

this function, after PPPoE disconnected, VIP-152T will automatically

reboot to re-connect, and after reboot, if VIP-152T still can t connect

with server, VIP-152T will keep trying to connect. On the other hand, if

user disables this function, VIP-152T won t reboot and keep trying to

connect.

• Exit: Return to upper level of LCD Menu

Table of contents

Other Planet IP Phone manuals

Popular IP Phone manuals by other brands

Alcatel

Alcatel 4028 manual

Polycom

Polycom Polycom VVX 600 quick reference

Polycom

Polycom SoundPoint IP 450 datasheet

Cisco

Cisco SPA-500 Series user guide

Polycom

Polycom SoundPoint IP 650 user guide

Proximus

Proximus Maestro 3016 IP quick start guide

Fanvil

Fanvil X4 user manual

Cisco

Cisco 7962 user guide

Snom

Snom 320 quick start guide

Yealink

Yealink Yealink SIP-T46G Guide

Avaya

Avaya 4625SW user guide

Yealink

Yealink SIP-T52S quick start guide

Nortel

Nortel 1140E Getting started

Nexotek

Nexotek NT-P500 user manual

Avaya

Avaya Integral 5 R3.0 user guide

GE 28320EE2 - Dect 6.0 InfoLink 2 user guide

Avaya

Avaya 4600 Series Administrator's guide

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP user guide