Planet IPOE-E174 User manual
1-Port Ultra PoE to 4-Port 802.3af/at Gigabit
PoE Extender
IPOE-E174
User’s Manual
Table of Contents
1. Introduction ............................................................................... 3
1.1 Packet Contents................................................................... 3
1.2 Application Diagram ............................................................. 4
1.3 Key Features ....................................................................... 5
1.4 TechnicalSpecications ........................................................ 7
1.5 Power over Ethernet Budget ................................................10
2. Installation................................................................................11
2.1 Physical Dimensions ............................................................11
2.2 Front Panel.........................................................................12
2.3 Mounting Installation...........................................................14
2.3.1 DIN-rail Mounting.......................................................14
2.3.2 Wall-mount Plate Mounting .........................................15
2.4 Connecting IPOE-E174 to Power Source Equipment (PSE) ......16
2.5 Connecting IPOE-E174 to Powered Device (PD) .....................17
3. Customer Support .....................................................................19
3
1. Introduction
1.1 Packet Contents
Thank you for purchasing PLANET IPOE-E174 1-Port Ultra PoE
to 4-Port 802.3af/at Gigabit PoE Extender. Open the box of
the IPOE-E174 and carefully unpack it. The box should contain the
following items:
Industrial Power over Ethernet
Extender x 1 User's Manual x 1
RJ45 Dust Cap x 5 Wall Mounting Kit x 1
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a
need to return it to us for repair.
4
1.2 Application Diagram
The IPOE-E174 is designed as a repeater to forward both Gigabit
Ethernet data and IEEE 802.3at PoE power, thus extending the range
of PoE installation. With just plug and play and without additional
power supply and setup, one single IPOE-E174 can increase the PoE
range to 200m and drive up four remote PoE IP cameras or wireless
access point.
Ultra PoE Injector
Power
Data
DC
Switch
100 meters
100 meters
100 meters100 meters
Power Line (DC)
DC
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
PoE
PoE
PoE
PoE
PoE
1000BASE-T UTP with Ultra PoE
PoE
IPOE-E174
5
1.3 Key Features
Physical Port
5-port 10/100/1000BASE-T Gigabit RJ45 interface
1-port data + power input
4-port data + power output
Power over Ethernet
1-port data + power input
Complies with ultra Power over Ethernet end-span and mid-
span PD
Complies with IEEE 802.3at Power over Ethernet Plus end-
span/mid-span PD
Supports PoE input power up to 75 watts
4-port data + power output
Complies with IEEE 802.3af/at PoE/end-span PSE
Up to 4 IEEE 802.3af/802.3at devices powered
Supports PoE power up to 30 watts for each PoE port
Auto detects powered device (PD)
Extends the range of PoE to an additional 100 meters (328ft.)
Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
Features Store-and-Forward mode with wire-speed ltering and
forwarding rates
Integrates address look-up engine, supporting 2K absolute MAC
addresses
9K jumbo frame support in 1000Mbps duplex mode
Automatic address learning and address aging
6
Industrial Case and Installation
IP30 metal case
DIN rail and wall-mount design
Supports 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
No external power cable required for installation
Plug and Play installation
Note
PSE (Power Sourcing Equipment) is a device (switch,
or hub for instance) that provides power in a PoE setup.
Maximum allowed continuous output power per such
device in IEEE 802.3af is 15.4W, and in IEEE 802.3at is
30W and in IEEE 802.3bt is 75W.
PD (Powered Device) is a PoE-enabled terminal by
PSE and thus consumes energy, such as PoE IP phones,
PoE IP cameras, PoE wireless access points, etc.
7
1.4 TechnicalSpecications
Model IPOE-E174
HardwareSpecications
Network Connector
PoE In Port
1 x 10/100/1000BASE-T Ethernet with ultra
PoE “Data + DC” in, auto MDI/MDI-X,
auto-negotiation RJ45 connector
PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE
802.3af/at PoE “Data + DC” out, auto
MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture Store-and-Forward switch architecture
MAC Address Table 2K MAC address table with auto learning
function
Switch Fabric 10Gbps
Switch Throughput 7.44Mpps @ 64Bytes
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9Kbytes
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN rail kit and wall-mount ear
Cable
Twisted-pair cable:
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100
meters
100BASE-TX: 2-pair UTP Cat. 5, 5e up to
100 meters
1000BASE-T: 4-pair UTP Cat. 5e,6 up to
100 meters
Dimensions
(W x D x H) 32 x 87.8 x 135 mm
Weignt 424g
8
Power Consumption
4.1 watts/13.98 BTU (Power On)
5.3 watts/18.1 BTU (Full loading without PoE
function)
64 watts/218.3 BTU (Full loading with PoE
function)
LED Display
System: PWR (Green)
Power Input: 30W, 2-pair 802.3at PoE in
(Green)
Power Input: 60W+, 4-pair 802.3bt, UltraPoE
or UPOE in (Green)
PoE Power usage: 20W, 40W and 60W
PoE Input Port: PoE In (Orange)
PoE Input Port: LNK/ACT (Green)
Per PoE Output Port: LNK/ACT (Green)
Per PoE Output Port: PoE-in-Use (Orange)
Power over Ethernet
PoE Standard
PoE in Port
IEEE 802.3at High Power over Ethernet
end-span / mid-span PD class 4 PD
Per PoE out Port
IEEE 802.3at High Power over Ethernet
end-span PSE
IEEE 802.3af Power over Ethernet end-span
PSE
PoE Power
PoE in Port
50~57V DC, max. 72 watts
Per PoE out Port
44~55V DC, max. 30.8 watts
Power Pin Assignment
PoE in Port
1/2(-), 3/6(+); 4/5(+), 7/8(-)
Per PoE out Port
1/2(+), 3/6(-)
9
PoE Power Budget
64 watts (max.) @ PoE Type 3 input (Ultra
PoE input)
30 watts (max.) @ PoE Type 2 input (802.3at
input)
15 watts (max.) @ PoE Type 1 input (802.3af
input)
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 free fall
IEC60068-2-27 shock
IEC60068-2-6 vibration
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Higher Power over Ethernet
Environment
Operating Temperature: -40 ~ 75 degrees C
Relative Humidity:5 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 degrees C
Relative Humidity:5 ~ 95% (non-condensing)
10
1.5 Power over Ethernet Budget
The following table lists how many PoE devices can be powered by the
IPOE-E174:
Power Source PoE Output
Budget*
Max. Number of PDs
supported
PLANET Ultra PoE PSE 64 watts
max.
Class 4 PD@25 watts 2 units
Class 3 PD@15 watts 4 units
Class 2 PD@7 watts 4 units
IEEE 802.3at PoE+
PSE
30 watts
max.
Class 3 PD@15 watts 2 units
Class 2 PD@7 watts 4 units
IEEE 802.3af PoE PSE 15 watts
max. Class 2 PD@7 watts 2 units
Remarks
1. The PoE Output Budget means the 4-port PD
aggregated power output. The aggregated power
consumption will be below 64 watts if with 802.3bt
or ultra PoE PSE.
2. Please check the power input LED for optimal power
output.
Other manuals for IPOE-E174
2
Table of contents
Other Planet Extender manuals
Planet
Planet IVC-234GT User manual
Planet
Planet VC-203PT User manual
Planet
Planet WBT-1000 User manual
Planet
Planet WGS-E304PT User manual
Planet
Planet WTB-1000 User manual
Planet
Planet POE-E301 User manual
Planet
Planet LRP-101CE User manual
Planet
Planet POE-E101 User manual
Planet
Planet PL-510W User manual
Planet
Planet WNAP-1110 User manual
Planet
Planet IPOE-E174 User manual
Planet
Planet VC-205PT User manual
Planet
Planet IPOE-E172 User manual
Planet
Planet LRE-101C User manual
Planet
Planet IHD-200PT User manual
Planet
Planet POE-E201 User manual
Planet
Planet LRE-101 User manual
Planet
Planet IHD-410PT User manual
Planet
Planet LRE-104 User manual
Planet
Planet WNAP-1110 Operator's manual
