Planar PXL2430MW User manual
www.planar.com
USER'S GUIDE
使用手册
LED Touch Monitor
触控屏液晶显示器
PXL2430MW
Content
Operation Instructions...................................................................................................................................................1
Unpacking Instructions .................................................................................................................................................2
Safety Precautions...........................................................................................................................................................2
Front View of the Product ............................................................................................................................................3
Rear View of the Product ..............................................................................................................................................4
Quick Installation .............................................................................................................................................................5
Basic Operation and Calibration/Reset Instructions...........................................................................................6
Advanced Operation—OSD Menu............................................................................................................................8
Supporting Timing Modes ........................................................................................................................................ 11
Technical Information................................................................................................................................................. 12
Wall-Mount Installation Instructions..................................................................................................................... 13
Troubleshooting............................................................................................................................................................ 14
Product Registration and Technical Support..................................................................................................... 15
English
Operation Instructions
Thank you for purchasing the PXL2430MW multi-touch LED monitor. Please read this guide
thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This LED Monitor has been tested and found compliant with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection
against harmful interference to a residential installation. This Touchscreen LED Monitor
generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be the result if it‘s not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this Touchscreen LED
Monitor does cause serious interference to radio or television reception, resetting may correct it.
Moreover, users are encouraged to reduce interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the Touchscreen LED Monitor and the receiver further away from each other.
Connect the Touchscreen LED Monitor into an outlet on a circuit different from that to
which the receiver is connected.
Consult your local dealer or a qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this Touchscreen LED Monitor would void the user‘s authority to
operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this Touchscreen LED Monitor can't be handled as normal trash in Europe
when it is out of usage. Please refer to the recycle information on Planar’s website to handle it.
For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN
1
English
Unpacking Instructions
Move the LED Monitor out of the package and take off the plastic bag and Polystyrene Foam.
Pull the base from Parallel versus Panel to Vertical.
Adjust the Panel between 0° leaning forward and 20° leaning backward.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
Turn off the product before cleaning.
Touch screen surface may be cleaned using a soft clean cloth moistened with mild window
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
Use a soft cloth moistened with mild detergent to clean the display housing.
Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don’t:
Do not touch the LED Display screen surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic field.
o In direct sunlight.
If smoke, abnormal noise or odor emits from your Touchscreen LED Monitor, remove the
power cord immediately and call your service center.
Never remove the rear cover of your Touchscreen LED Monitor. The display unit inside
contains high-voltage parts and may cause electric shock.
Never try to repair your Touchscreen LED Monitor yourself. Always call your service center or a
qualified technician to fix it.
2
English
Front View of the Product
①②③④⑤⑥⑦
①Touch Pen Slot
②OSD Turn On/ Off
③Volume Adjust/ Scroll Down/ Adjust Decrease
④Preset Mode/ Scroll UP/ Adjust Increase
⑤Input select/ Confirm Selection
⑥LED Indicator
⑦Power On/ Off
3
English
Rear View of the Product
⑧⑨⑩⑪⑫ ⑬ ⑭
⑧Power Input
⑨USB - Type A to B
⑩Headphone Jack
⑪Audio Input
⑫HDMI input (HDMI 19 pin)
⑬DVI Input (DVI 24 pin)
⑭VGA Input (D-Sub 15 pin)
4
English
Quick Installation
1. Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make
sure both monitor and computer are powered OFF.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the USB cable from the computer to the monitor.
4. Connect power cord to a properly grounded AC outlet, and then to the monitor.
5. Power-ON computer and then POWER-ON the monitor.
6. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Figure 1:
PC
Audio cable
USB 2.0 cable
VGA cable
DVI cable
HDMI cable
(not supplied)
Power cable
5
English
Basic Operation and Calibration/Reset Instructions
Before using the Touchscreen LED Monitor:
Connect external equipment properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the Touchscreen LED Monitor on/off:
Press POWER button on the front. The power LED indicator light will be blue when the
Touchscreen LED Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen
LED Monitor.
Displays main menu
1 Exits from OSD menu
2 Selects between VGA, DVI, HDMI or Auto mode
Select the desired item when in OSD menu
▼When not in OSD menu, directly enters Volume adjust
Select the desired item when in OSD menu
▲When not in OSD menu, directly enters Preset Mode
▼+ ▲Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When Touchscreen LED Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1button and the ▲button for 10 seconds to lock the OSD buttons.
The Touchscreen LED Monitor will show an “OSD Lock Out” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
6
English
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the 1button and the ▼button for 10 seconds to lock all 5 buttons.
The Touchscreen LED Monitor will show a “Lock Out” message for 3 seconds and the message
will disappear automatically.
Repeat this step to unlock.
PX2430MW Calibration/Reset Instructions:
The PX2430MW is available with USB connection. It is Microsoft® Windows® 7 HID (Human
Interface Device) compatible if you use the USB touch screen interface. No additional software
driver is required. Calibration is a simple process and can be invoked by running Tablet PC
Settings from Control Panel and clicking the Calibrate button.
Click the Reset button to reset the touchscreen to the factory calibration settings. To reset the
existing calibration data, click "Reset" in the Tablet PC Settings window.
7
English
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor.
Press the 1button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Short Cuts Function from the button(s)
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine
Tune) and Clock (H. Size) of the screen.
Contrast: To adjust the foreground white level of screen image.
▲: increase contrast, ▼:decrease contrast.
Brightness: To adjust the luminance of the video.
▲: increase brightness, ▼:decrease brightness.
ECO Mode: Allows the user to turn the ECO On or Off. Contrast and Brightness
adjustment disabled when ECO is active.
Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or
Auto.
Audio Adjust: To adjust the audio functions.
Volume: To adjust the volume of speaker output.
Mute: To turn the Mute ON/OFF.
8
English
Table of contents
Other Planar Monitor manuals
Planar
Planar PT1785P User manual
Planar
Planar Helium PCT2785 User manual
Planar
Planar CT1905S User manual
Planar
Planar PLL1920M User manual
Planar
Planar LO552 User manual
Planar
Planar LA1500R User manual
Planar
Planar CT1744NU User manual
Planar
Planar Dome C3i User manual
Planar
Planar VS15SXAD-TR User manual
Planar
Planar 40" User manual
Planar
Planar m70L User manual
Planar
Planar PL1911M User manual
Planar
Planar PT191MU User manual
Planar
Planar Simplicity Series User manual
Planar
Planar UltraRes W Series User manual
Planar
Planar PLL1900W User manual
Planar
Planar PT1945R User manual
Planar
Planar Dome Q2 User manual
Planar
Planar SD2020 Parts list manual
Planar
Planar PE1500 User manual
