Piezo liteFon 1030 User manual
user manual
Introduction! ! ! …………………………………………!3
Contents of the package ………………………………………… 4
Overview of the device ………………………………………… 5
Setting up the telephone ………………………………………… 6
Recommendations for the location of the telephone ………. 7
2. Display ……………………………………………………… 8
2.1 Display ……………………………………………………… 8
2.2 Symbols ……………………………………………………… 8
3. Putting the telephone into operation …………………… 8
3.1 Adjusting the language …………………… 9
3.2 Adjusting area dialing code …………………… 9
3.3 Adjusting the provider …………………… 9
3.4 Adjusting time and date …………………… 9
3.5 Adjusting the display contrast …………………… 9
3.6 Babycall …………………… 9
3.7 Phonebook Input …………………… 10
3.8 Edit directory …………………… 10
3.9 Flashtime …………………… 10
3.10 Leaving the options …………………… 11
4. Telephoning ………………………………… 11
4.1 Using the receiver ………………………………… 11
4.2 Hands-free mode ………………………………… 11
4.3 Using the phonebook ………………………………… 11
4.4 Redial ………………………………… 12
4.5 Dialing trough direct call ………………………………… 12
4.6 Displaying the duration of the conversation ……………. 12
4.7 Hands-free operation ………………………………… 12
5. CLIP ……………………………………… 13
5.1 Accepting a call ……………………………………… 13
5.2 Saving the displayed number into phonebook …………… 13
liteFon 1030 userʻs manual
INDEX
Page 2
5.3 CLIP memory ……………………………………… 13
5.4 Dialing the displayed number ………………………… 14
5.5 Deleting a number ……………………………………… 14
5.6 Muting the microphone ……………………………….. 14
6. Phonebook ………………………………… 15
6.1 Adding a new entry ………………………………… 15
6.2 Editing an entry ………………………………… 15
6.3 Deleting an entry ………………………………… 15
7. One touch memory M1-M6 …………………………… 15
7.1 Adding a new number …………………………… 16
7.2 Saving telephone numbers of incoming calls into one touch memory
7.3 Dialing from one touch memory …………………………… 16
7.4 Edit/overwrite/delete entry …………………………… 16
8. Saving numbers from calling list …………………………… 16
9. Returning calls from calling list …………………………… 16
10. General information ………………………………… 16
11. Troubleshooting ………………………………… 16
12. What if… ………………………………… 17
13. Warranty conditions ………………………………… 17
Introduction
With the Piezo telephone liteFon 1030 you have chosen a telephone that is free from magnetic
fields.
No other electric device is used so close to the head as the telephone. It is therefore important to
minimize or to avoid electric magnetic fields. Through the Piezo receiver there is no magnetic field,
and the electric field is low. This has no negative effect on the acoustic, and therefore there is no
difference between traditional dynamic receivers and the piezo receivers.
liteFon 1030 userʻs manual
Page 3
Whether using the LiteFon 1030 for business or in your private life, it has all the features you need
in a modern telephone. The most important feature are:
- Piezo-receiver without magnetic field
- Adjustable receiver volume
- Extensive phonebook
- One touch memory
- CLIP function
- Bilingual navigation
- Hands-free mode
- Adjustable ringer
- DTMF/ pulse tone compatible
- Power saving power supply unit
- Optional use of batteries
Safety instructions:
For your safety, do not use the telephone in near running water. The telephone is not splashproof.
In case of giving the telephone to third parties, make sure that you also include the user manual.
Contents of the package
The packaging of the LiteFon 1030 includes:
-Telephone
- Piezo handset
- Handset Cord
- Connection cable RJ11/RJ11
- Energy saving power supply unit
- Printed user manual in German
Default setting
Please adjust the setting of the LiteFon 1030 according to your needs.
The default settings are:
Language: English
Dialing procedure: DTMF
Signal: Flash 600ms
Ringer adjustment: loud
liteFon 1030 userʻs manual
Page 4
1. Overview of the device
1.1. Overview of the device
Nr. description function
1
Display
the display shows the chosen function, names,
numbers, date, time and the duration of the
conversation
2
Direct dial
with these direct dial memory keys M1-M6 you
can save the numbers of contacts
3
Delete key
Delete entries in the directory and the direct dial,
or you can cancel settings
4
Phonebook
Open the phonebook
5
Forward/Backward
Browse in the entries
6
OK key
Confirm entries or carry out functions
7
Mute
Turn off the microphone and the receiver
8
Enquiry key
Press key – to activate some network functions
9
Redial
Open redial list
10
Hands-free
Switch to hands-free
11
Microphone
Microphone for hands-free
12
Alphanumerical keypad
For dialing telephone numbers. Letters printed
on housing.
13
Ringtone volume adjustment
Slide switch for adjusting the ringtone volume
14
Pause
Pause time of 3.6 s
15
LED
Lights when hands-free is turned on
16
OUT
List of outgoing conversations
liteFon 1030 userʻs manual
Page 5
Backside of the device
17
Ringer adjustment
Adjust the volume of the ringer: loud,
intermediate, silent
18
Receiver adjustment
Adjust the volume of the receiver: loud, quiet
19
Connection
Connection point for the power supply unit
Setting up the telephone
Your device is ready for operation after a few simple procedures.
Plug and battery box cover have to click into place.
In order to use your telephone you need to perform a few simple procedures.
liteFon 1030 userʻs manual
Page 6
Line cord
The connector cable has two identical plugs RJ11. Insert one in the socket marked with the
telephone symbol on the backside of the device. Insert the other plug in your telephone connection
socket.
Handset cord
The receiver cable also has two identical lugs. Insert one into the socket at the receiver and the
other one in the marked socket on the device.
Use of the power supply unit
Connect the power supply unit with the telephone and the electricity supply system.
Use of the batteries
1. Open the battery compartment
2. Insert three AA-batteries or rechargeable batteries (note the polarity!)
3. Close the battery box. The cover has to click into place
You have the possibility to use the telephone either with the power supply unit or with batteries.
If you have no power supply or batteries for the telephone, you can still use the telephone to
make and receive calls, but you will not be able to use other functions on the telephone, e.g.
the directory, direct dial, redial, or CLIP.
Recommendations for the location of the telephone
Your telephone has been manufactured for normal conditions of use. Nowadays furniture is treated
with a large variety of gloss paint and synthetic material. There may be a possibility that some of
these materials affect the plastic feet of the telephone, or that these plastic can leave traces on the
furniture. For understandable reasons, we cannot be made liable for these damages. We
recommend the use of a non-slip pad.
liteFon 1030 userʻs manual
Page 7
2. Display
2.1 Display
MON
12:34 28/10
2011
ALL002 NEU001
2.2 Symbols
Abbreviations on the display
In the second line:
IN number of incoming calls
REP repeated incoming call
NEW new incoming call
OUT number of outgoing calls
In the third line:
USING - telephone is in use
In the fourth line:
ALL number of all incoming calls
NEW number of new incoming calls
Putting the telephone into operation
MON
12:34 28/10
VIEW MENU
liteFon 1030 userʻs manual
The first line on the display shows the weekday, the second line
shows the date and the time, as well as the place in the directory
and the number of incoming and outgoing calls. In the third line you
can see the year and the telephone number. The fourth line shows
the active function, the number of calls and the name of the contact
in the phone book.
After connecting the telephone, change the default settings of language, time, date etc. to your preferred
settings:
Press the key to enter the menu. To
navigate use the keys
Page 8
3.1 Adjusting the Language
SELECT LANGUAGE
3.2 Adjusting time and date
MON
12:34 28/10
2011
DATE/TIME
3.5 Adjusting the display contrast
MON
12:34 28/10
CONTRAST ADJUST
3.6 Babycall
MON
12:34 28/10
BABYCALL
liteFon 1030 userʻs manual
1. Choose “Select language” through pressing the
key once
2. Confirm with
3. Chose a language by pressing
4. Confirm with
1. Press the four times and chose the “Date/
Time”. Confirm with
2. You can adjust the date (year/day/month) and the
time (hours/minutes) by using
3. Confirm your choice with
1. Choose “Contrast adjust” by pressing five
times and confirm with
2. Choose a setting using the keys (e.g. 1 =
light, 5 = dark)
3. Confirm with
1. Press four times and choose “Babycall” with
2. You can activate or deactivate the function by pressing
3. If you activate the function you will be asked to enter a
telephone number. This number will automatically be
called no matter which key you press.
4. Confirm with
Page 9
3.7 Phonebook Input
MON
0123456789
INPUT NUMBER
MON
0123456789
TOM MILLER
3.8 Edit phonebook (change saved numbers)
MON
12:34 28/10
PHONEBOOK EDIT
MON
0123456789
TOM MILLER
3.9 Flashtime
MON
FLASH TIME 300MS
liteFon 1030 userʻs manual
1. Choose “Phonebook input” by pressing three times
and confirm with
2. Enter a telephone number
3. Confirm with
4. Enter the name
5. Confirm with
1. Press two times and chose “phonebook edit”
2. You can browse the entries with
3. Press if you want to change a number
4. Press to delete one by one
5. Enter new number
6. Confirm with
1. Press once and chose “Flashtime”. Confirm with
2. Chose a predefined value with the keys: 100 ms –
600 ms (1000 ms only for specific use).
When connecting to private telephone system you might
have to change the flashtime. Check manual of telephone
system. In most European countries the default value is
100 ms (Flash) and 300 ms (Hook Flash).
3. Confirm with
Page 10
Table of contents
