Pickering 40-736 User manual

pickeringtest.com

Issue 5.6 July 2021

40-736 User Manual

PXI Data Communications Multiplexer Module

Page (II) DATA COMMS MULTIPLEXER MODULE 40-736

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Page (III)

DATA COMMS MULTIPLEXER MODULE 40-736

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Page (IV) DATA COMMS MULTIPLEXER MODULE 40-736

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy reference should be made to the safety instructions for

provisions of lifting and moving.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Page (V)

DATA COMMS MULTIPLEXER MODULE 40-736

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Functional Description..........................................................2.1

Switching Diagrams ..............................................................2.2

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options For Pickering PXI Modules ............4.1

Module Architecture..............................................................4.2

Programming the Module .....................................................4.2

Section 5

Connector Information................................................................5.1

Interface Board Information .................................................5.2

Section 6

Trouble Shooting.........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Switching System Test Tools ...............................................7.1

Relay Lookup Tables.............................................................7.1

CONTENTS

Page (VI) DATA COMMS MULTIPLEXER MODULE 40-736

pickering

THIS PAGE INTENTIONALLY BLANK

Page (VII)

DATA COMMS MULTIPLEXER MODULE 40-736

pickering

Page (VII)

2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the host chassis are populated with blanking plates to prevent access to user I/O

signals that may be present. Blanking panels are available to order from Pickering in a variety of

slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

Not to be used in safety critical circuits, refer to the Pickering Interfaces’ terms & conditions of sale.

This module must not be used for the switching of Mains Circuits. For the switching of voltages up

to the module’s full specication, Secondary Circuit power supplies and the Device Under Test must

be fully isolated from the Mains Circuit and the safety earth.

The host chassis must be correctly installed and be connected to mains or factory safety ground,

please refer to your chassis installation manual.

Diagram Showing Separation Between The Mains Circuit and Secondary Circuit / DUT

For the purposes of this document, a Mains Circuit is an installation classied as Overvoltage

Category II up to 300V. Separation between the Secondary Circuit and Mains Circuit is achieved

by a transformer in which the primary windings are separated from the secondary windings by

reinforced insulation, double insulation, or a screen connected to the protective conductor terminal.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

PXI Switching

Module

Device

Under Test

Power

Supply

Power

Supply

Host Chassis

Secondary Circuit

Mains

Circuit

Mains

Circuit

Mains/Factory

Safety Ground

Page (VIII) DATA COMMS MULTIPLEXER MODULE 40-736

pickering

Page (VIII) 2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user I/O

signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Page 1.1

DATA COMMS MULTIPLEXER MODULE 40-736

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

pickeringtest.com

PXI Data Communications MUX 40-736

ISSUE 5.2 JUL 2021

Supported by

eBIRST

eBIRST switching system test tools simplify

switching system fault-ﬁnding by quickly

testing the system and graphically identifying

the faulty relay. For more information go to:

pickeringtest.com/ebirst

yMultiplexer Designed For Differential Signals

yConﬁgurable To Single, Dual and Quad Multiplexer

yWide Differential Bandwidth

yControlled Differential Impedance of 100 Ω

ySuitable For Telephony, Ethernet, AFDX, BroadR-Reach,

LVDS, RS232 and USB Switching Applications

yCompatible With 1 Gb Ethernet

yDesigned to Work With AFDX and Future

Implementations of ARINC’s ADN

yDifferential Pair Reversing Switch to Simulate

Crossover Cables

yAvailable With Interface System to Ethernet/AFDX

Connectors

yVISA, IVI & Kernel Drivers Supplied for Windows

ySupported by PXI or LXI Chassis

ySupported by

eBIRST

™

y3 Year Warranty

8-Way

2-Pole

Tree MUX

8-Way

2-Pole

Tree MUX

8-Way

2-Pole

Tree MUX

8-Way

2-Pole

Tree MUX

Rx/Tx

Reversing

Switch

Rx/Tx

Reversing

Switch

2-Pole Switching Array

Rx1

Rx2

Tx1

Tx2

All Signal Paths

Are 2-Pole

Functional diagram of the 40-736

Data Communications Multiplexer

Pickering’s Range of Data Comms Multiplexers

Model

No. Conﬁguration Application

40-735 Single 36 channel or Dual 18

channel, differential pair USB, RS232

40-736 Single 32, Dual 16, Quad 8

channel, differential pair

1 Gb Ethernet, AFDX,

BroadR-Reach, LVDS,

USB, RS232

40-737 Single 8:1 or 16:1 differential

pair and power USB1, USB2

The 40-736 is designed speciﬁcally for multiplexing or

demultiplexing differential signal pairs having controlled

100 Ω impedance. The multiplexer can be conﬁgured under

software control to have single 32, dual 16 or quad 8 signal

pair switching. The dual and quad versions are particularly

suited for switching AFDX, Ethernet and BroadR-Reach links.

The 40-736 is capable of switching 1 Gb Ethernet signals

and the design includes a switching network that simpliﬁes

the swapping of Tx and Rx pairs to simulate the effect of

crossover cables.

The module is ideal for testing multiple

devices that use serial interfaces, allowing one

target device from many to be selected. The

design is bi-directional and can be used as a

multiplexer or de-multiplexer with no impact

on performance. The module is compatible with

Power Over Ethernet.

Other applications include the switching of

telephone cabling or the routing of LVDS, RS232

and USB serial interface signals.

The design uses long life electro-mechanical

relays characterized for use in telephony.

Page 1.2 DATA COMMS MULTIPLEXER MODULE 40-736

pickering

SECTION 1 - TECHNICAL SPECIFICATION

Data Communications MUX, 40-736

pickeringtest.com

Overview

Rx/Tx

Reversing

Switch

Common

8-Way

8-Pole

Multiplexer

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

4 Pairs

Rx/Tx

Reversing

Switch

Common

16-Way

4-Pole

Multiplexer

CH1

CH3

CH5

CH7

CH9

CH11

CH13

CH15

2 Pairs

CH2

CH4

CH6

CH8

CH10

CH12

CH14

CH16

Common

32-Way

2-Pole

Multiplexer

CH1

CH3

CH5

CH7

CH9

CH11

CH13

CH15

1 Pair

CH2

CH4

CH6

CH8

CH10

CH12

CH14

CH16

CH17

CH19

CH21

CH23

CH25

CH27

CH29

CH31

CH18

CH20

CH22

CH24

CH26

CH28

CH30

CH32

40-736 Data Communications Multiplexer: Example Conﬁgurations

16-Way Multiplexer Switching 2

Pairs of Signals

Suitable for 100 BaseT Ethernet,

POTs, USB 4-wire switching

(with power).

32-Way Multiplexer Switching 1

Pair of Signals

Suitable for differential signalling,

BroadR-Reach and USB data line

multiplexing.

8-Way Multiplexer Switching

4 Pairs of Signals

Suitable for 1 Gb Ethernet

switching.

The Low Cost option 40-965-901

and Compact option 40-965-907

converter boards allow the easy

connection of RJ45 leads to the

40-736 and at the same time

maintaining signal integrity.

Table of contents

Other Pickering Multiplexer manuals

Pickering

Pickering PXI Power MUX BRIC 40-571A User manual

Pickering

Pickering 50-670A User manual

Pickering

Pickering PXI Power MUX BRIC 40-571A User manual

Pickering

Pickering 40-640 User manual

Pickering

Pickering 40-658 User manual

Pickering

Pickering 40-650A User manual

Pickering

Pickering 40-613A User manual

Pickering

Pickering 40-670 User manual

Pickering

Pickering 40-667B User manual

Pickering

Pickering SYSTEM 10 User manual

Pickering

Pickering PXI 40-661 User manual

Pickering

Pickering SYSTEM 10 User manual

Pickering

Pickering 40-659A User manual

Pickering

Pickering PXI Power MUX BRIC 40-571 User manual

Pickering

Pickering SIMRC 1050 User manual

Pickering

Pickering 40-662A User manual

Pickering

Pickering 40-680 User manual

Pickering

Pickering 40-666A User manual

Pickering

Pickering 40-570A User manual

Pickering

Pickering 40-735 User manual

Pickering

Pickering 40-614B User manual

Pickering

Pickering 40-617A User manual

Pickering

Pickering PXI 40-850A User manual

Pickering

Pickering 40-760 User manual

Popular Multiplexer manuals by other brands

Campbell

Campbell AM416 instruction manual

Paradyne

Paradyne SIM2000 installation instructions

Panasonic

Panasonic WJFS616 - SWITCHER Operating instruction

Lanex

Lanex TM-77 operating manual

Bosch

Bosch VSS8394/01T operating manual

Quark-Elec

Quark-Elec QK-A035 Setup guide

ADTRAN

ADTRAN Frameport 768 Specifications

Elo TouchSystems

Elo TouchSystems E247 Operation manual

Paradyne

Paradyne Hotwire 8786 installation instructions

RFL Electronics

RFL Electronics 9508D UCC instruction manual

Miranda

Miranda AMX-101i Guide to installation and operation

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 manual

GE StoreSafe SDVR-10 user manual

American Fibertek

American Fibertek MTX-8410C instruction manual

ADC

ADC HiGain ELU-319 5E user manual

Paradyne

Paradyne Hotwire 8774 user guide

American Fibertek

American Fibertek MTX-8810C-SL instruction manual

Viessmann

Viessmann 5229 user manual