Physipro Contour Insert User manual
Owners manual
This manual contains important informations
about this product. Please hand to the user
upon delivery.
Manuel d’utilisation
Ce livret contient d’importantes informations
relatives à ce produit. Merci de remettre à
l’utilisateur final lors de la livraison.
Owners manual
ENGLISH
Physipro Inc. Seating and mobility solutions
Physipro Inc. is proud to count you among its customers and would like to
thank you for the confidence you have shown by purchasing our product.
This user manual was created to provide you with all the information needed to
allow you to use our product in a safe and optimal way. For all adjustments and
settings, we strongly recommend you contact your distributor.
For Physipro Inc., your satisfaction is our highest priority.
PRODUCT INFORMATION
Date of purchase:
Supplier:
Address:
Telephone:
Contour Insert
ENGLISH
TABLE OF CONTENT
Contour InsertTM.........................................................................................5
Product introduction .....................................................................................5
Cushion composition .....................................................................................6
Insert options available .................................................................................7
Recommendations..........................................................................................8
Warnings ......................................................................................................... 9
Installation....................................................................................................10
Maintenance .................................................................................................11
Insert options...........................................................................................12
Waffle Gel & Urethane.........................................................................12
Pebble Gel & Urethane........................................................................13
Soft memory foam & Urethane ..........................................................14
« Temper 36 & 38 » Memory foam ......................................................15
ImmAirsionTM.............................................................................................16
Product introduction ..........................................................................17
Components ........................................................................................18
Installation ..........................................................................................19
Recommendations ..............................................................................20
Maintenance........................................................................................21
Troubleshooting..................................................................................23
Warranty-Contour InsertTM and options.........................................25
Français .........................................................................................................27
Owners manual
5
ENGLISH
CONTOUR INSERTTM
The Contour InsertTM is composed of a firm base which features a recess in the
pelvic loading area for the addition of the insert of your choice. The Contour
InsertTM seat cushion can be purchased with different inserts and they can be
used interchangeably to provide the pressure relief needed to continually
ensure optimal comfort and skin protection.
This item meets the requirements of California 116 & 117, NFPA 701, CE marking
and NF EN1021-1, EN1021-2 norms.
Contour InsertTM
6
ENGLISH
CUSHION COMPOSITION
Contour InsertTM
Foam base
Top layer: Urethane
Bottom layer: Plastazote
Available Sizes
Width: 14”- 24”(35 cm – 60 cm)
Depth: 14”- 24” (35 cm – 60 cm)
Thickness: 2”, 3”or 4”(5 cm, 7,5 cm or 10 cm)
Insert(s) of your choice
Cover(s) of your choice
Foam base
The product presented in this manual may not be an exact representation of
your product. However, the instructions provided in this manual are still valid.
PhysiproTM reserves the right to modify or change this manual without
notice.
Owners manual
7
ENGLISH
INSERT OPTIONS AVAILABLE
• Waffle Gel & Urethane
• Pebble Gel & Urethane
• Soft Memory Foam & Urethane
• “Temper36 & 38“ Memory foams
• ImmAirsionTM Air Cell (see page 16)
“Temper 36 & 38“ Memory foams
Soft Memory Foam & Urethane
Waffle Gel & Urethane Pebble Gel & Urethane
ImmAirsionTM Air Cell
Contour InsertTM
8
ENGLISH
RECOMMENDATIONS
Before use, verify the quality and condition of the components of the cushion.
To ensure your cushion provides optimal protection and comfort and to
extend your product lifespan, the following precautions should be applied.
• PhysiproTM seat cushions are reserved exclusively for use on mobility aids
(manual or power wheelchairs), do not use cushion on other surfaces.
• Before installation, make sure the cushion is compatible with the wheelchair
seat dimensions.
• Cushion must be installed on a clean and flat wheelchair surface of good
quality and condition.
• Verify height of armrest. Adjustments should be made, if needed.
• Never place a towel, a blanket, a folded bed sheet or any other material
between the user and the cushion, this will diminish the cushion’s efficiency
and increase the risk of developing skin lesions.
• It is preferable to wear clothes made of cotton, that are not too tight and do
not have seams on pressure points.
• Before use, let the cushion get to room temperature to limit discomfort
caused by excessively hot or cold surfaces.
• Never place cushion near sharp object.
• Remove any foreign object (crumbs, debris, tubing, etc.) from cushion
surface.
• Clean on a regular basis and visually inspect all components of the cushion
periodically.
It is recommended to consult your therapist in the month following the
installation of a new cushion to make sure it is efficient.
Owners manual
9
ENGLISH
WARNINGS
Consult a healthcare professional: PhysiproTM recommends that a health care
professional such as a doctor or therapist,experienced in seating and positioning,
be consulted to determine and install the required seating system and make any
necessary adjustments.
Center of gravity: Installing a cushion on a wheelchair may affect the center
of gravity of the wheelchair and may cause the wheelchair to tip backwards,
potentially resulting in injury. To ensure optimal stability of your wheelchair
after the addition of a new cushion, always assess for the potential need for anti-
tippers or amputee axle adapter brackets to be added or adjusted to increase
stability.
Cushion dimensions: The dimensions of the cushion must be adapted to
the user and the wheelchair, if not, the cushion’s benefits will be reduced or
eliminated.
Cushion and cover compatibility: The cushion cover must be well-fitted and
used as directed in this manual to prevent the formation of skin lesions. An
oversized or undersized cover will reduce or eliminate the effectiveness of the
cushion and can create an unstable surface, which can lead to a fall.
Environment: Avoid exposing foam to fluids or moisture for prolonged periods.
Avoid exposing the cushion to extreme cold or heat. Never place cushion near
open flame.
Instability/Fall risk: Never place other products or materials (except those
specified in this manual) between the user and the cushion or underneath the
cushion, doing so, will cause instability and increase the risk of injury from a fall.
Positioning of cushion: Always refer to the orientation indicators of the cushion
and the cover to properly position cushion on wheelchair. Proper positioning is
essential to ensure maximum comfort and pressure relief.
Skin inspection: Cushion should be tested before prolonged use. PhysiproTM
recommends shifting your weight as frequently as possible and performing a
pressure relief technique at least once every two (2) hours. You should regularly
check (at least once a day) for skin redness especially around bony prominences.
If skin redness or discoloration develops, discontinue use of the cushion. If
discoloration does not disappear within thirty (30) minutes consult a healthcare
professional immediately. Be aware that no cushion can substitute the need for
proper skin hygiene, a balanced diet and frequent position changes.
Transport: Crash tests have not been conducted on these products and even if
the mobility aid in which it is installed has obtained the ISO-717619, it will not be
maintained.
Contour InsertTM
10
ENGLISH
INSTALLATION
Your cushion is assembled according to your specifications before delivery.
Simply position the cushion on the wheelchair surface, make sure the insert
is properly placed in the recess and that air cells are pointed upwards. The
orientation indicator marked «Front» on the bottom of the outer cover must
be placed towards the front and facing downwards. Make sure the stitches are
aligned with the cushion’s edges.
Note: Velcro fasteners are provided for installation on a flat wheelchair seat.
Self-adhesive Velcro strips are attached to two fixed Velcro strips, located
on the bottom side of the cushion’s outer cover. To securely fix the cushion
onto the rigid seat pan, remove the protective film of the self adhesive velcro,
position cushion and then press down firmly on the cushion to ensure Velcro
has properly adhered to the seat pan.
Other manuals for Contour Insert
1
Table of contents
Languages:
Other Physipro Personal Care Product manuals
Physipro
Physipro PELVIC POSITIONING BELT WITH DOUBLE... User manual
Physipro
Physipro LXA User manual
Physipro
Physipro Contour Cinch Backrest User manual
Physipro
Physipro LATERAL CONTROL HEADREST User manual
Physipro
Physipro PLASTRON User manual
Physipro
Physipro Valeo User manual
Physipro
Physipro In Bed Thoracic Support User manual
Physipro
Physipro ANKLE HUGGER User manual
Physipro
Physipro RIGID SEAT User manual
Physipro
Physipro SC7590 User manual
