Philips FC8820 User manual

FC8820

FC8810

FC8820, FC8810

ENGLISH 6

ČEŠTINA 26

MAGYAR 46

LIETUVIŠKAI 67

POLSKI 87

ROMÂNĂ 109

SLOVENŠČINA 130

Introduction

Congratulations on your purchase and welcome to Philips!To fully

benet from the support that Philips offers, register your product at

www.philips.com/welcome.

Your robot (Fig. 1)

1 Handle of dust container lid

2 Dust container lid

3 Filter

4 Dust container

5 Top cover

6 Error codes table

7 Fan

8 Bumper

9 On/off button (switches robot on or to standby)

10 Power switch (switches robot on or off)

11 Front wheel

12 Side brush shafts

13 Drop-off sensors

14 Wheels

15 Battery cavity

16 Suction opening

17 Side brushes

18 Rechargeable battery

19 Battery cavity cover

20 Fixation blocks for dry wipes

21 Dry wipe holder

22 Dry wipes

23 Battery holder

24 Remote control

25 Charging cord

26 Pointer

27 Virtual wall unit

28 Docking station

29 Adapter

30 Small plug

Displays and control panels

Control panel of docking station

1 Display with time, day and programming indications

2 Adjusting and setting buttons

3 Battery indicator

ENGLISH

Remote control

1 Navigation buttons and on/off

2 Cleaning time buttons

3 Cleaning mode buttons

4 Fan speed buttons

5 Docking button

Pointer (FC8820)

1 Pointer button

2 On/off button

3 Cleaning mode buttons

4 Cleaning time buttons

5 Docking button

How your robot works

What your robot cleans

This robot is equipped with features that make it a suitable cleaner to help

you clean the oors in your home.

The robot is especially suitable for cleaning hard oors, such as wooden,

tiled or linoleum oors. It may experience problems cleaning soft oors,

such as carpet or rugs. If you use the robot on a carpet or rug, please stay

close by the rst time to see if the robot can deal with this type of oor.

The robot also needs supervision when you use it on black and shiny

hard oors.

How your robot cleans

Cleaning system

The robot has a 3-stage cleaning system to clean your oors efciently.

- The two side brushes help the robot clean in corners and along walls.

They also help to work dirt loose from the oor.

ENGLISH 7

- The suction power of the robot picks up loose dirt and transports

it through the suction opening into the dust container.

- The robot comes with a dry wipe holder that allows you to clean

your hard oor even more thoroughly with dry wipes.

Cleaning patterns

In its auto cleaning mode, the robot uses an automatic sequence of

cleaning patterns to clean each area of the room optimally.The cleaning

patterns it uses are:

1 Z-pattern or zigzag pattern

2 Random pattern

3 Wall-following pattern

4 Spiral pattern

During auto cleaning, the robot uses these patterns in a xed sequence:

1 Z-pattern

2 Random pattern

3 Wall-following pattern

4 Spiral pattern

- When the robot has completed this sequence of patterns, it starts

moving in Z-pattern again.The robot continues to use this sequence

of patterns to clean the room until the rechargeable battery is empty,

or until it is switched off manually.

- If the robot detects a particularly dirty area during its cleaning run,

it switches to spiral mode and to turbo fan speed to ensure thorough

dirt removal.

Note:You can also select each mode individually by pressing the appropriate

button on the remote control or pointer (FC8820 only). For more details,

see chapter ‘Using your robot’, section ‘Cleaning modes’.

ENGLISH8

How your robot avoids height differences

- The robot has three drop-off sensors in its bottom. It uses these drop-

off sensors to detect and avoid height differences such as staircases.

Note: It is normal for the robot to move slightly over the edge of a height

difference, as its front drop-off sensor is located behind the bumper.

Caution: In some cases, the drop-off sensors may not detect a staircase

or other height difference in time.Therefore monitor the robot carefully

the rst few times you use it, and when you operate it near a staircase

or another height difference.

Before rst use

Mounting the side brushes

1 Unpack the side brushes and place the robot upside down on a table

or on the oor.

2 Push the side brushes onto the shafts on the bottom of the robot.

Note: Make sure you attach the side brushes properly. Press them onto the

shaft until you hear them lock into position with a click.

Inserting the rechargeable battery into the robot

You have to insert the rechargeable battery before use.

1 Press the ribbed sections on the battery cavity cover to unlock it.

2 Slide the battery cavity cover off the robot.

3 Remove the plastic from the rechargeable battery.

ENGLISH 9

4 Place the rechargeable battery into the battery cavity.

Note: Make sure that the print on the battery points upwards and that the

connectors point in the right direction.

5 Slide the battery cavity cover back onto the robot.

Removing the protection tag from the remote control

The remote control works on a CR2025 coin-shaped battery.This battery

is protected with a protection tag that has to be removed before use.

1 Pull the battery protection tag out of the battery compartment of

the remote control.

,Now the remote control is ready for use.

Preparing for use

Installing the docking station

1 Insert the small plug of the adapter into the socket on the docking

station (1) and insert the adapter into the wall socket (2). The display

of the docking station lights up.

2 Place the docking station on a horizontal, level oor against the wall.

Tip: To ensure the docking station stays rmly in the selected spot, you can

fasten it to the wall with screws or with two strips of double-sided tape.

Note: Make sure that there are no obstacles or height differences 80cm in

front, 30 cm to the right and 100cm to the left of the docking station.

Charging

When you charge the rechargeable battery for the rst time and when the

rechargeable battery is empty, the charging time is four hours.

ENGLISH10

Other manuals for FC8820

This manual suits for next models

Table of contents

Languages:

Other Philips Vacuum Cleaner manuals

Philips

Philips SpeedPro Max User manual

Philips

Philips FC8672 Manual

Philips

Philips SpeedPro Max XC7043 User manual

Philips

Philips FC8950 User manual

Philips

Philips FC9120 User manual

Philips

Philips FC8660 User manual

Philips

Philips FC6055/01 User manual

Philips

Philips FC9258 User manual

Philips

Philips Vision HR8735/01 User manual

Philips

Philips FC9150/01 User manual

Philips

Philips FC8219 User manual

Philips

Philips FC6076/01 User manual

Philips

Philips 2000 series User manual

Philips

Philips FC9262 User manual

Philips

Philips FC8526/09 Operating manual

Philips

Philips FC6146 User manual

Philips

Philips FC9062/01 User manual

Philips

Philips FC6168 User manual

Philips

Philips FC7090 Operating manual

Philips

Philips MiniVac FC6048/01 User manual

Philips

Philips FC8139 User manual

Philips

Philips FC9110/01 User manual

Philips

Philips FC8792 User manual

Philips

Philips FC6067/01 User manual

Popular Vacuum Cleaner manuals by other brands

Bissell

Bissell LittleGreen Proheat 1425 Series user guide

Panasonic

Panasonic MC-YL637S147-AE Service manual

NEFF

NEFF N17XH10 0 Series instruction manual

LG A9 Series owner's manual

Oreck

Oreck Cordless Captura BK51700 Series user guide

Kogan

Kogan KAVACROBVWA user manual

Kränzle

Kränzle VENTOS 50 ID Use and maintenance

EVVO

EVVO Ai35 instruction manual

DeWalt

DeWalt DWH200D instruction manual

Pontec

Pontec Pondomatic Vacuum Cleaner operating instructions

Cleanmaxx

Cleanmaxx PC-P007E instruction manual

Exido

Exido 240-114 manual

RIDGID

RIDGID WD1685AU0 owner's manual

Ezviz

Ezviz RE4P manual

STG global

STG global TANVAC HDV3000 Operator's manual

Shark

Shark ROTATOR PRO COMPLETE NV550 Series manual

Factory

Factory M3340 operating manual

Shop-Vac

Shop-Vac VN92 SERIES user manual