Philips FC8820 User manual
FC8820
FC8810
1
6
Introduction
Congratulations on your purchase and welcome to Philips!
at www.philips.com/welcome.
Your robot (Fig. 1)
1 Handle of dust container lid
2 Dust container lid
3 Filter
4 Dust container
5 Top cover
6 Error codes table
7 Fan
8 Bumper
9 On/off button (switches robot on or to standby)
10 Power switch (switches robot on or off)
11 Front wheel
12 Side brush shafts
13 Drop-off sensors
14 Wheels
15 Battery cavity
16 Suction opening
17 Side brushes
18 Rechargeable battery
19 Battery cavity cover
20 Fixation blocks for dry wipes
21 Dry wipe holder
22 Dry wipes
23 Battery holder
24 Remote control
25 Charging cord
26 Pointer
27 Virtual wall unit
28 Docking station
29 Adapter
30 Small plug
Displays and control panels
Control panel of docking station
2 Adjusting and setting buttons
3 Battery indicator
ENGLISH
Remote control
1 Navigation buttons and on/off
2 Cleaning time buttons
3 Cleaning mode buttons
4 Fan speed buttons
5 Docking button
Pointer (FC8820)
1 Pointer button
2 On/off button
3 Cleaning mode buttons
4 Cleaning time buttons
5 Docking button
How your robot works
What your robot cleans
This robot is equipped with features that make it a suitable cleaner to help
The robot also needs supervision when you use it on black and shiny
How your robot cleans
Cleaning system
- The two side brushes help the robot clean in corners and along walls.
ENGLISH 7
- The suction power of the robot picks up loose dirt and transports it
through the suction opening into the dust container.
- The robot comes with a dry wipe holder that allows you to clean your
Cleaning patterns
cleaning patterns to clean each area of the room optimally.The cleaning
patterns it uses are:
1 Z-pattern or zigzag pattern
2 Random pattern
3 Wall-following pattern
4 Spiral pattern
1 Z-pattern
2 Random pattern
3 Wall-following pattern
4 Spiral pattern
-
moving in Z-pattern again.The robot continues to use this sequence
or until it is switched off manually.
-
it switches to spiral mode and to turbo fan speed to ensure thorough
dirt removal.
Note:You can also select each mode individually by pressing the appropriate
button on the remote control or pointer (FC8820 only). For more details,
see chapter ‘Using your robot’, section ‘Cleaning modes’.
ENGLISH8
How your robot avoids height differences
-
off sensors to detect and avoid height differences such as staircases.
Note: It is normal for the robot to move slightly over the edge of a height
difference, as its front drop-off sensor is located behind the bumper.
Caution: In some cases, the drop-off sensors may not detect a staircase
or other height difference in time.Therefore monitor the robot carefully
or another height difference.
Mounting the side brushes
1
2 Push the side brushes onto the shafts on the bottom of the robot.
Note: Make sure you attach the side brushes properly. Press them onto the
shaft until you hear them lock into position with a click.
Inserting the rechargeable battery into the robot
You have to insert the rechargeable battery before use.
1 Press the ribbed sections on the battery cavity cover to unlock it.
2 Slide the battery cavity cover off the robot.
3 Remove the plastic from the rechargeable battery.
ENGLISH 9
4 Place the rechargeable battery into the battery cavity.
Note: Make sure that the print on the battery points upwards and that the
connectors point in the right direction.
5 Slide the battery cavity cover back onto the robot.
Removing the protection tag from the remote control
The remote control works on a CR2025 coin-shaped battery.This battery
is protected with a protection tag that has to be removed before use.
1 Pull the battery protection tag out of the battery compartment of
the remote control.
,
Preparing for use
Installing the docking station
1 Insert the small plug of the adapter into the socket on the docking
of the docking station lights up.
2
fasten it to the wall with screws or with two strips of double-sided tape.
Note: Make sure that there are no obstacles or height differences 80cm in
front, 30 cm to the right and 100cm to the left of the docking station.
Charging
Your robot can be charged in two ways:
ENGLISH10
Other manuals for FC8820
5
This manual suits for next models
1
Table of contents
Other Philips Vacuum Cleaner manuals
Philips
Philips Specialist User manual
Philips
Philips FC6082/01 User manual
Philips
Philips FC6052/11 User manual
Philips
Philips HR6016/03 User manual
Philips
Philips FC8631 Operating manual
Philips
Philips FC8257/01 User manual
Philips
Philips City Line Helsinki FC8408 User manual
Philips
Philips FC9238/01 User manual
Philips
Philips FC8740 User manual
Philips
Philips HR6804/89 User manual
Philips
Philips FC9012 User manual
Philips
Philips FC9734 User manual
Philips
Philips SmartPro Active User manual
Philips
Philips FC8603 User manual
Philips
Philips FC6141 User manual
Philips
Philips FC8794 User manual
Philips
Philips FC6172 User manual
Philips
Philips FC8749 User manual
Philips
Philips FC9073 User manual
Philips
Philips FC8972 User manual
