Philips SRU1060/10 User manual

SRU1060

Quick, Clean & Easy Setup

www.philips.com/urc

Instructions for use 4

Instructions pour l’utilisation 12

Modo de empleo 20

Bedienungsanleitung 28

Gebruiksaanwijzing 36

Istruzioni per l’uso 44

Instruções de uso 52

Bruksanvisning 60

Vejledning 68

Bruksanvisning 76

Käyttöohje 84

FIN

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 1

(

)

™

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 3

Contents

1. Introduction......................................................................................................4

2. Installing the remote control....................................................................4-8

Replacing the battery.......................................................................................................4-5

Testing the remote control...............................................................................................5

Setting the remote control...........................................................................................6-8

3. Keys and functions ..........................................................................................9

4. Restoring the original functions of your remote control....................10

5. Troubleshooting.......................................................................................10-11

6. Need help?......................................................................................................11

Code list of all brands / equipment................................................................92-105

Information to the Consumer...................................................................................106

1. Introduction

Congratulations on your purchase of the Philips SRU1060 universal remote

control. After installing the remote control you can operate a TV and a

DVD player/recorder with it.

You can find information about how to prepare this remote control for use

in the chapter ‘Installing the remote control’.

2. Installing the remote control

•A battery is already placed in the battery compartment of the

SRU1060. Just remove the protective foil from the battery and the

SRU1060 is ready for use.

Replacing the battery

The SRU1060 comes with one spare battery in the packaging.

1Press the little latch on the right hand side

of the battery compartment

Keep the latch pressed and slide the

compartment outwards.

4ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 4

2Place the spare CR2025 Lithium battery

into the battery compartment, as shown.

Make sure to place the text side of the

battery upwards.

3Slide the cover back and click it firmly

into place.

Note: If the LED blinks four times after every key press, the remote control is

indicating that its battery is running low.

Replace the old battery with a

CR2025 Lithium battery.

Testing the remote control

The remote control has been programmed to operate most Philips brands.

Because the SRU1060 may use different signals for each brand and even for

different models of the same make, it is advisable to test whether your

brand responds to the SRU1060.

The example below (TV) instructs you how to do this.

You can repeat the same steps for your DVD player/recorder which you

want to operate using the SRU1060.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Check whether all the keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

–If the TV responds as it should to all of the

key commands the SRU1060 is ready for

use.

If the LED does not light up, check whether the battery has been

properly inserted.

See ‘Inserting the battery’.

•If the device does not respond at all or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’, or for online setup go to: www.philips.com/urc.

5ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 5

Setting the remote control

This is only necessary if your brand does not respond to the SRU1060.

If that is the case, the SRU1060 does not recognize the brand and/or

model of your brand and you need to program the remote control to do

so.

The example below (TV) instructs you how to do this.

You can repeat the same steps when setting the SRU1060 for your

DVD player/recorder.

You can set the remote control either automatically or manually.

Automatically setting the remote control

The remote control will now automatically search for the right code for

your brand.

Example of TV:

The keys between brackets are used for setting the SRU1060 for your

DVD player/recorder.

1Make sure the TV is switched on and select a channel using the

original remote control or the keys on the TV

(for example channel 1).The SRU1060 emits the ‘switch off TV’ signal

for all models of TV that are stored in the memory.

•If the device is a DVD player/recorder, insert a disk and start playback.

2Then keep keys VOL + and PROG +

(5and 6) on the SRU1060 pressed

simultaneously for three seconds,until the

LED flashes twice and then remains lit.

3Press and hold the TV (DVD) key of

the SRU1060.

6ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 6

– The SRU1060 now starts emitting all known . . . . . . . . . . . . . . . . . . . . . .

‘TV off’ signals, one by one.

Each time a code is sent, the LED lights up.

5When your TV switches off (stand-by), release the TV (DVD) key of

the SRU1060 immediately.

–The SRU1060 has now found a code that works on your TV.

6Check if you can operate all functions on your TV with the SRU1060.

•If this is not the case, you can redo the automatic setting.

The SRU1060 will then search for a code that works better.

–After the SRU1060 has run through all the known codes, the search

will stop automatically and the LED stops flashing.

–Automatic programming of a TV takes a maximum of 5 minutes.

For DVD this time is 2 minutes.

Manually setting the remote control

Example of TV:

The keys between brackets are used for setting the SRU1060 for your

DVD players/recorder.

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the code of your TV in the

code list at the back of this manual.

7ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 7

The code exists of a combination of 5 keys

(always the cursor keys and the OK key in

various combinations). E.g. 1, OK, 3, OK, 4.

One or more codes are shown for each

brand. Note the first code.

Be careful! There are separate tables for TV,

and DVD.

On our website www.philips.com/urc you can directly select your device

typenumber to find the right code.

Make sure you use the codes from the correct table.

3Keep keys VOL + and PROG +

(5and 6) on the SRU1060 pressed

simultaneously for three seconds until the

LED flashes twice and then remains lit.

4Then enter the code noted in step 2

using the 1,2,3,4and OK keys.

–The LED will now flash twice. If the LED

flashes once for an extended period, the

code has not been entered properly or the

wrong code has been entered.

Start again from step 2.

5Point the SRU1060 at the TV and check that it responds as it should.

–If the TV responds to all of the key commands, the SRU1060 is ready

for use. Do not forget to note your code.

•If the device does not respond at all, or not to all of the key

commands, start again from step 2 and try the next code from

the list.

8ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 8

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

TV keys

3 4 - VOL + . . . . . . . . . . . adjusts the TV volume.

2s. . . . . . . . . . . . . . . . . mutes the sound of the TV.

™A/V . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

( ) - PROG + . . . . . . . . . selects a previous or following channel.

¡. . . . . . . . . . . . . . . . selects wide screen TV.

£TV. . . . . . . . . . . . . . . . switches TV on and off.

DVD keys

!DVD . . . . . . . . . . . . . . switches DVD on and off.

7DISC MENU. . . . . . opens disc menu.

5 & Cursor keys. . . . . . . cursor up, down in a menu.

6 * Cursor keys. . . . . . . cursor left, right in a menu.

8MENU . . . . . . . . . . . . turns the menu on and off.

95. . . . . . . . . . . . . . . . . - rewind

$2. . . . . . . . . . . . . . . . . - play

09. . . . . . . . . . . . . . . . . - stop

@;. . . . . . . . . . . . . . . . . . - pause

#6. . . . . . . . . . . . . . . . . - wind

%OK . . . . . . . . . . . . . . . confirms your selection.

^BACK. . . . . . . . . . . . . jumps back one level in the menu or turns

off the menu.

General

1LED

•If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’. It is possible that you must enter another code for the

device.

9ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 9

4. Restoring the original functions of your

remote control

1Keep keys DISC MENU and BACK on

the SRU1060 pressed simultaneously for

three seconds,until the LED flashes twice

and then remains lit.

2Press the TV (or DVD) key.

All original functions have now been

restored and any extra functions have been

deleted.

5. Troubleshooting

• Problem

– Solution

•

The LED blinks four times after every key press.

–

The remote control is indicating that its battery is running low.

Replace the old

battery with a CR2025 Lithium battery.

•The device you want to operate does not respond and the LED does

not flash when you press a key.

–Replace the old battery with a CR2025 Lithium battery.

•The device you want to operate does not respond but the LED does

flash when a key is pressed.

–Point the SRU1060 at the device and make sure that there are no

obstructions between the SRU1060 and the device.

•The SRU1060 does not respond properly to commands.

–Maybe you are using the wrong code.Try programming the SRU1060 again

using another code, which is mentioned under the brand of your device, or

reset for automatic search to find the right code. If the device still does not

respond, call our helpline.

10 ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 10

•You have difficulties operating all of the functions on your device.

– Maybe the SRU1060 has to be adapted to the model of the device.

Call our helpline for details.

•Your brand of device is not in the code list.

– Try to set the SRU1060 automatically. See ‘Automatically setting the

remote control’.

•None of the codes works during manual setting of the remote control.

– If that is the case, follow the instructions under ‘Automatically setting the

remote control’.

6. Need help?

If you have any questions about the SRU1060, you can always contact us.

You will find or contact details after the code list at the back of this manual.

Read this manual carefully before you make a call.You can solve most of the

problems yourself. If you cannot find any answers to your problems, write

down the details of your device shown in the code list at the back of this

manual.This will help our operators to assist you better and more quickly.

Look up the numbers of the models in the instructions accompanying the

device or on the back of your device.When you call our helpline, make

sure the device is to hand so that our operators can help you determine

whether your remote control is working properly.

The model number of your Philips universal remote control is SRU1060.

Date of purchase: ......../......../........

(day/month/year)

ENGLISH

SRU1060_A6.qxd6 25-08-2005 12:03 Pagina 11

This manual suits for next models

Table of contents

Languages:

Other Philips Remote Control manuals

Philips

Philips SRU5050/55 User manual

Philips

Philips Perfect replacement SRP5107/27 User manual

Philips

Philips 22AV1106B User manual

Philips

Philips SRU9600/17 User manual

Philips

Philips SRU 538/87 User manual

Philips

Philips SRP4050 User manual

Philips

Philips Magnavox PM520 User manual

Philips

Philips SBC RU 252/00H User manual

Philips

Philips Pronto TSU3000 User manual

Philips

Philips IRT 9090 User manual

Philips

Philips EasyLink 28PT7202/12 User manual

Philips

Philips SRP5004/87 User manual

Philips

Philips SRU 5120/87 User manual

Philips

Philips SBCRU252/00H User manual

Philips

Philips SBCRU422/87U User manual

Philips

Philips SRU3005/27 User manual

Philips

Philips SBCRU630/85 User manual

Philips

Philips Perfect replacement SRC3036WM/17 User manual

Philips

Philips SRP3011 User manual

Philips

Philips SRP620/10 User manual

Philips

Philips Perfect replacement SRP5107/27 User manual

Philips

Philips SRU4007/27 User manual

Philips

Philips PMDVR8 User manual

Philips

Philips SRP504/86 User manual

Popular Remote Control manuals by other brands

Panasonic

Panasonic EUR7622KB0 Operation guide

Bang & Olufsen

Bang & Olufsen Beo4 user manual

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 user manual

Multiplex

Multiplex PROFI TX 9 instructions

One Remote

One Remote RMB4 user manual

FUTABA

FUTABA 9ZAP - PART2 manual

HR Matic

HR Matic HR MULTI 3 quick start guide

Yamaha

Yamaha ACC-GNRST-30-20 installation instructions

EisSound

EisSound KBSOUND user manual

Marantz

Marantz RC101 user guide

Conrad

Conrad FS20 TC6 operating instructions

Anritsu

Anritsu MP1777A Operation manual

Niles

Niles WVC100 Installation & operating guide

RCA

RCA RCU1300 manual

Bang & Olufsen

Bang & Olufsen BEO6 Getting started

GE 94901 instruction manual

Onbon

Onbon YQ1-75 user manual

FUTABA

FUTABA R7108SB Full manual