Philips SRP4040 User manual

Replacement Remote for Panasonic®TVs

Ersatzfernbedienung für Panasonic®Fernseher

Télécommande de remplacement pour téléviseurs Panasonic®

TAPR802

www.philips.com/support

User manual

Replacement

Remote

SRP4040

1EN

Contents

Insert batteries (not included) 2

Introduction 2

Manual set up by code selection 3

Auto IR code search 4

Code Learning 5

Disposal of your old product and battery 6

Frequently asked questions 7

Need help? 7

Contents

2EN

Your replacement

remote

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome

Insert batteries (not included)

Warning

• Check the battery polarity when inserting in the

battery compartment. Incorrect polarity may damage

the product.

Caution

• Risk of explosion! Keep batteries away from heat,

sunshine or re. Never discard batteries in re.

• Risk of decreased battery life! Never mix different

brands or types of batteries.

Note

• When you replace the batteries, all user settings will

be retained in the memory of the universal remote for

5 minutes.

Introduction

The TV replacement remote RRC has pre-

programmed the most updated IR code and is

ready to use.

3EN

Manual set up by code

selection

The replacement remote RRC has pre-

programmed the most updated IR code and

is ready to use. If it does not work, you can

manually select the code from our list that can

t your TV.

Set up by code selection

1 Switch on yourTV.

2 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

3 Look up the available 5-digit code. The

most popular code is listed rst. The

factory default code is 00000.

List of IR code for Panasonic and Philips TVs

4 Enter the selected 5-digit code using the

digit buttons.

5 If the light is off, a valid code is saved.

Otherwise, the light will ash six times, and

then remains on for code re-entry.

Note

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again. If there spill problem on code or key, you

can try to learn a key by learning faction if the remote

support learning function.

Panasonic TV

00000

00001

00002

00003

00004

00005

00006

00007

00008

00009

00010

00011

00012

00013

Panasonic TV

00014

00015

00016

00017

Philips TV

00100

00101

00102

00103

00104

00105

00106

00107

Philips TV

00108

00109

00110

00111

00112

00113

00114

00115

00116

00117

00118

00119

00120

4EN

Auto IR code search

1 Turn off your TV with stand-by power

2 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

3 While pointing at yourTV with the RRC,

press and release the PLAY button once,

it sends Power On/Off command of an IR

code from our list.

4 When the TV turn on (it might takes a

few seconds for someTV to power on),

you can try other keys (except PLAY and

STOP) to see if the TV response.

5 You can press STOP to conrm and exit

the search. If most of the other keys does

not work properly, turn off your TV and

press PLAY again to try the next code.

Note

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again. If there spill problem on code or key, you

can try to learn a key by learning faction if the remote

support learning function.

5EN

Code Learning

You must have an original remote for the

Replacement Remote Control (RRC) to learn

code from it.

Learn commands

1 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

2 Enter the learning code 99900.

The red LED light will ash once and then

remains on.

3 Place the RRC and the original remote,

head to head aiming at each other, on a at

surface.

Orginal Remote Replacement

Remote

4 On the RRC, press the button that you

would like to learn a code from the

original remote. The LED will ash twice

and stay on.

5 On the original remote, press and hold the

button that you would like to learn from

for 2 seconds.

6 The LED will blink once and stay on if the

learning was successful.To learn another

key, repeat Step 4.

To exit, press 1and 6at the same time.

7 The LED will blink 6 times quickly if

learning failed. Repeat Step 4 to learn again.

Note

• On step 4, if no key is selected for more than 15

seconds, the LED indicator will ash six times and the

learning mode will exit automatically.

• On step 5, if no other remote signal is received for

more than 30 seconds, the LED indicator will ash

six times and then remains on.You will need to select

a desired key again for learning as in step 4 on your

replacement remote control.

• Each function key will hold only one command, a new

command to be learned will automatically replace the

previous one.

Clear learned commands

Clear all codes learned for the replacement

remote control

1 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

2 Enter the learning code 99910.The

red LED light will remain on briey, ash

twice and then turns off.

» All codes learned for the replacement

remote control will be cleared.

6EN

Disposal of your old product

and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see section

‘Insert batteries’.

When this logo is attached to a product, it

means a nancial contribution has been paid to

the associated national recovery and recycling

system.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

7EN

Frequently asked questions

My replacement remote does not work at all.

• Check if you have correctly setup the

device with the right code. Check if you

have pressed the corresponding device key

for your device.

• Check if the batteries are inserted

properly. If the battery level is low, replace

the batteries.

• Check if your device is powered on.

If several device codes are listed under the

brand of my device, how can I select the

correct device code?

To seek the correct device code, test the codes

one by one.The codes are sorted by popularity,

and the most popular code is listed rst.

My device responds only to some of the

commands.

You have set a code for which only some

commands work properly but some do not.Try

other codes until most keys work properly or

learn the key from original remote if it support

learning function.

Need help?

We advise you to rst read this user manual

carefully. It helps you set up and use the

replacement remote.

If, however, you require extra information or

have additional questions about setup, usage,

warranty, etc of the RRC, you can always

When calling our helpline, make sure to have

the RRC at hand when you call, so that our

operators can help you determine whether

RRC is working properly.

You will nd our contact details at the end of

this user manual. For online support, visit

www.philips.com/support

P Vision Europe B.V.

Prins Bernhardplein 200 1097

JB Amsterdam The Netherlands

Authorised Representative

UKCA Experts Ltd.

Dept 302, 43 Owston Road

Carcroft Doncaster, DN6 8DA

United Kingdom

Specications are subject to change without notice.

Philips and the Philips Shield Emblem are registered trademarks

of Koninklijke Philips N.V. and are used under license.

This product has been manufactured by and is sold under the

responsibility of MMD Hong Kong Holding Limited or

one of its afliates, and MMD Hong Kong Holding Limited is

the warrantor in relation to this product.

SRP4040_10_UM_V1.0

Table of contents

Other Philips Remote Control manuals

Philips

Philips EcoSet BLE User manual

Philips

Philips City line User manual

Philips

Philips US2-PMDVR8 User manual

Philips

Philips SRP 1001/10 User manual

Philips

Philips TSU9600/93 Safety guide

Philips

Philips Perfect replacement SRC2063WM/17 User manual

Philips

Philips SBC RU 538 User manual

Philips

Philips PRESTIGO SRU8008 User manual

Philips

Philips SRU5110/86 User manual

Philips

Philips SBC RU 240/00 User manual

Philips

Philips SRU1060/10 User manual

Philips

Philips SRU 740/10 User manual

Philips

Philips US2-PHBIG4 User manual

Philips

Philips SRU9600/37 User manual

Philips

Philips SRP2018 User manual

Philips

Philips SRP1101/10 User manual

Philips

Philips SRU4007/27 User manual

Philips

Philips SRU 560/86 User manual

Philips

Philips SRP4004/55 User manual

Philips

Philips SRP5004/86 User manual

Philips

Philips PRONTO TSU7500 User manual

Philips

Philips KWR164501/01 User manual

Philips

Philips SRP4004/87 User manual

Philips

Philips DTR230 - User manual

Popular Remote Control manuals by other brands

Panasonic

Panasonic EUR7622KB0 Operation guide

Bang & Olufsen

Bang & Olufsen Beo4 user manual

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 user manual

Multiplex

Multiplex PROFI TX 9 instructions

One Remote

One Remote RMB4 user manual

FUTABA

FUTABA 9ZAP - PART2 manual

HR Matic

HR Matic HR MULTI 3 quick start guide

Yamaha

Yamaha ACC-GNRST-30-20 installation instructions

EisSound

EisSound KBSOUND user manual

Marantz

Marantz RC101 user guide

Conrad

Conrad FS20 TC6 operating instructions

Anritsu

Anritsu MP1777A Operation manual

Niles

Niles WVC100 Installation & operating guide

RCA

RCA RCU1300 manual

Bang & Olufsen

Bang & Olufsen BEO6 Getting started

GE 94901 instruction manual

Onbon

Onbon YQ1-75 user manual

FUTABA

FUTABA R7108SB Full manual