Philips SRP3013 User manual
SRP3013
Always there to help you
Register your product and get support at
www.philips.com/support
User manual
GrayTurqoise Duotone
Black / PMS300
Question?
Contact
Philips
Question?
Contact
Philips
Question?
Contact
Philips
English
EN 1
Contents
1 Your universal remote 2
Introduction 2
Overview of the universal remote 2
Supported devices 3
2 Get started 4
Insert batteries (not included) 4
Set up the universal remote 5
3 Notice 9
Notice of compliance 9
Disposal of your old product and batteries 11
4 Service and support 12
Frequently asked questions 12
Need help? 12
Contents
2 EN
1 Your universal remote
Congratulations on your purchase, and welcome to Philips!To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome
Introduction
With the universal remote, you can operate up to 3 different devices.
Overview of the universal remote
a INPUT: select available source inputs (antenna, cable, etc.).
: power on or off.
: LED indicator
b Device selection buttons
a
b
c
d
e
f
g
English
EN 3
c LIVE: displays live TV programs.
LIST: displays a list of recorded programs.
INFO: displays on-screen channel information.
GUIDE: displays the program guide.
: play
: fast forward
: rewind
: pause
: stop
: record
d / / / : scroll the menu up/down/left/right.
OK: conrm your selection.
MENU: menu on or off.
BACK: go back one menu level or exit.
e : mute
LAST: return to the previous tuned channel.
CH+/CH-: go to the next/previous channel.
VOL: adjust the volume.
f A/B/C/D: context sensitivity buttons (A - yellow, B - blue, C- red,
D - Green).
g Digit buttons
ENTER: conrm the digit button selection.
(-): selects between one and two-gure channel numbers.
Supported devices
Device name Description
TV TV, DTV
BD DVD player/recorder, Blu-ray player
STB Cable box, satellite receiver, IPTV, DVR, HDTV
decoder and TiVo
4 EN
2 Get started
Insert batteries (not included)
Warning
• Check the battery polarity when inserting in the battery compartment. Incorrect polarity may
damage the product.
Caution
• Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard batteries in
re.
• Risk of decreased battery life! Never mix different brands or types of batteries.
Note
• When you replace the batteries, all user settings will be retained in the memory of the
universal remote for 5 minutes.
English
EN 5
Set up the universal remote
You must rst set up the universal remote before operating your devices.
Manual registration
1 Switch on your device.
2 Press and hold the device selection button (e.g.TV) for 5 seconds until
the blue LED is on.
3 Look up the 5-digit code for your brand in the code list. Codes are listed
by the device type and brand name. The most popular code is listed rst.
6 EN
4 Enter the rst 5-digit code using the digit buttons.
5 If the light is off, a valid code is saved. Otherwise, the light will ash once,
and then remains on for code re-entry.
6 Operate the device with the universal remote. If your device responds
correctly, it means you have entered the right code. Otherwise, repeat
from step 2, and enter the second code on the list.
Note
• It is possible sometimes that your device only responds to some of the buttons. In such case,
set up with the next code in the code list, and try operating your device again.
English
EN 7
Auto registration
1 Switch on your device.
2 Press and hold the device selection button (e.g.TV) for 5 seconds until
the blue LED is on.
8 EN
3 Point at your device with the universal remote.Then press and release
to start searching the code for your brand. A different infrared signal is
sent every 2 seconds as the universal remote searches, indicated by a
blue ash.
4 When the device is off, immediately press and release OK to save the
code.The blue LED indicator will turn off.
5 Operate the device with the universal remote. If your device responds
correctly, it means you have saved the right code.
Note
• Auto registration can be reversed, by pressing and releasing once more during the auto
registration process.This is helpful if you missed out the chance to press OK within 2 seconds.
Make sure that the device is rst powered on again.
• Repeat the same procedures to set up other devices.
max. 20
minutes
Table of contents
Other Philips Remote Control manuals
Philips
Philips SRU2104S/27 User manual
Philips
Philips SBC RU 530/87U User manual
Philips
Philips SRU5130/53 User manual
Philips
Philips SRU8008/27 User manual
Philips
Philips SRP9368D/27 User manual
Philips
Philips SBCRU538/00I User manual
Philips
Philips SRU1060/10 User manual
Philips
Philips Prestigo SRU8015/34 User manual
Philips
Philips SpaceWise User manual
Philips
Philips SRM7500 User manual
Philips
Philips RC1974503/00RF User manual
Philips
Philips Pronto TSU9200 Safety guide
Philips
Philips SBCRU980/05 User manual
Philips
Philips SRP1101/10 User manual
Philips
Philips EasyLink 28PT7202/12 User manual
Philips
Philips PRESTIGO SRU8008 User manual
Philips
Philips T32 User manual
Philips
Philips Perfect replacement SRC2063WM User manual
Philips
Philips SRU5100/27 Administrator guide
Philips
Philips Pronto TSU3000 User manual
