Philips TAT2206 User manual

2000 Series

Headphones

TAT2206

User manual

www.philips.com/support

2 Your True

wireless

earphones

What's in the box

Philips True wireless earphones

Philips TAT2206

Replaceable rubber ear caps x 3 pairs

Quick start guide

Other devices

A mobile phone or device (e.g.

notebook, tablet, Bluetooth adapters,

MP3 players etc) which supports

Bluetooth and is compatible to the

earphones (see 'Technical data' on

page 11).

Congratulations on your purchase, and

welcome to Philips! To fully benet

from the support that Philips oers,

www.philips.com/welcome.

With this Philips True wireless

earphones, you can:

• enjoy convenient wireless

handsfree calls;

• enjoy and control wireless music;

• switch between calls and music.

Global Warranty

Safety leaet

4 EN

USB-C charging cable (for charging only)

Overview of your True

wireless earphones

LED indicator (Earphones)

Multi-function button

Microphone

LED indicator (charging box)

USB-C charging slot

5 EN

3 Get started

Charge the battery

Charging

Note

 Before you use your earphones for the rst

time, place the earphones in the charging box

and charge the battery for 2 hours for

optimum battery capacity and lifetime.

 Use only the original USB-C charging cable to

avoid any damage.

 Finish your call before charging the

earphones, as connecting the earphones for

charging will power the earphones o.

Connect one end of the USB cable into

the charging box, and another end into

the power source.

• Charging process is veried by the

LED light on the front panel.

• When the charging box is fully

charged, the light goes o.

Tip

 The charging box serves as a portable backup

battery for charging the earphones. When the

charging box is fully charged, it supports 2

times full recharge cycle for the earphones.

 Normally, a full charge takes 2 hours (for the

earphones or charging box) by USB cable.

The LED on both earphones

ash in white & blue alternately.

The charging box starts charging.

Pair the earphones with

your Bluetooth device

for the rst time

Open the top cover from charging

box.

Make sure that the earphones is

fully charged.

Note

 After powering on, if the earphones cannot

nd any previously connected Bluetooth

device, it will automatically switch to pairing

mode.

The earphones are now in

pairing mode and is ready to

pair with a Bluetooth device

(e.g. a mobile phone)

Turn on the Bluetooth function of

your Bluetooth device.

Pair the earphones with your

Bluetooth device. Refer to the user

manual of your Bluetooth device.

6 EN

Single earpiece (Mono mode)

Take either right or Left earpiece out

from charging box for Mono use. The

earpiece will power on automatically.

There will be a voice “Power on” from

earpiece.

Note

 Take the second earpiece from the charging

box and they will pair each other automatically.

 The earphones store 4 device in the memory. If

you try to pair more than 4 devices, the earliest

paired device is replaced by the new one.

Pair the earphones with

another Bluetooth device

Turn on the Bluetooth function

of your Bluetooth device, select

Philips TAT2206.

The following example shows you

how to pair the earphones with

your Bluetooth device.

If you have another Bluetooth device

that you want to pair with the

earphones, make sure the Bluetooth

function in any other previously paired

or connected devices are turned o.

Press and hold over 5 seconds both left

& right side simultaneously with earpiece

on ear, release when Pairing voice

prompt is heard.

Enter the earphones password

“0000” (4 zeros) if prompted.

For those Bluetooth devices

featuring Bluetooth 3.0 or

higher, no need to enter a

password.

Philips TAT2206

7 EN

Tip

Note

 The earphones cannot connect to more than 1

device at the same time. If you have two paired

Bluetooth devices, only turn on the Bluetooth

function of the device that you want to connect.

 If you turn on the Bluetooth function of your

Bluetooth device after turning on the

earphones, you have to go to the Bluetooth

menu of the device and connect the earphones

to the device manually.

 If the earphones fail to connect to any

Bluetooth device within 3 minutes, it will turn o

automatically to save the battery life.

 In some Bluetooth devices, connection may not

be automatic. In this case, you have to go to the

Bluetooth menu of your device and connect the

earphones to the Bluetooth device manually.

The blue LED ashes.

The earphones will search the

last connected Bluetooth device

and reconnect to it

automatically. If the last

connected device is not

available, the earphones will

enter pairing mode.

4 Use your

headphones

Turn on the Bluetooth function of

your Bluetooth device.

Task

Turn the

earphones

Open

charging

case's lid

Earpiece

put back to

charging

box and

close the lid

Turn the

earphones

o

Open the top cover from charging

box.

Connect the earphones to

your Bluetooth device

Power on/o

Multifunc

tion

button

Operation

Music control

Play or

pause music

Skip forward Right / Left

earpiece

Right / Left

earpiece

Double taps

Skip

backward

Triple taps

Adjust

volume +/-

Via mobile

phone

control

Right / Left

earpiece

Single tap

Manage your calls and

music

Task Multifunc

tion

button

Operation

8 EN

Switch call

during 3-way

call

Right / Left

earpiece

triple taps

Call control

Pick up/

Hang up Call

Reject an

incoming call

Right / Left

earpiece

Tap and

hold

Right / Left

earpiece

single tap

Task Multifunc

tion

button

Operation

LED indicator status

The earphones

are connected to

a Bluetooth

device

The earphones

are ready for

pairing

The earphones are

on but not

connected to a

Bluetooth device

Low battery level

(earphones)

Blue LED blink 2x

every 5s

The blue & white

LED ash

alternately

White LED blink

every 1s

(auto turn o after

3min)

Blue LED ashes

Headphones

status

Indicator

Battery is fully

charged

(charging box)

9 EN

LED will be o

Task Button Operation

Right / Left

earpiece

Trigger voice

(Siri/Google)

assistant

Tap and

hold 2

seconds

Voice Assistant

When charging Indicator

Battery low

Relative adequate

battery

O

Amber LED light

Battery low

Relatively

adequate battery

White LED light up

Amber LED light

In use and cover

is open

Indicator

5 Reset the

earphones

TAT2206

Press once on both earphones, and

then press and hold for 5 seconds.

Follow steps in “Use your

earphones-Connect the earphones

to your Bluetooth device.”

Pair the earphones with your

Bluetooth device, select Philips

TAT2206.

10 EN

6 Technical data

Note

 Specications are subject to change without

notice.

Music time: 6 hours

Talk time: 6 hours

Standby time — 200 hours

Charging time: 2 hours

Lithium-ion battery 55 mAh on each

earpiece, Lithium-ion battery

350mAh on charging box

Bluetooth version: 5.0

Compatible Bluetooth proles:

• HFP (Hands-Free Prole)

• A2DP (Advanced Audio

Distribution Prole)

• AVRCP (Audio Video Remote

Control Prole)

Supported audio codec: SBC

Frequency range: 2.402-2.480GHz

Transmitter power: < 10 dBm

Operating range: Up to 10 meters (33

feet)

Auto power o

USB-C port for charging

Low battery warning: available

11 EN

7 Notice

Declaration of conformity

Disposal of your old

product and battery

Your product is designed and

manufactured with high quality

materials and components, which can

be recycled and reused.

This symbol on a product means that

the product is covered by European

Directive 2012/19/EU.

This symbol means that the product

contains a built-in rechargeable battery

covered by European Directive

2013/56/EU which cannot be disposed

of with normal household waste. We

strongly advise you to take your product

to an ocial collection point or a Philips

service centre to have a professional

remove the rechargeable battery.

Inform yourself about the local separate

collection system for electrical and

electronic products and rechargeable

batteries. Follow local rules and never

dispose of the product and rechargeable

batteries with normal household waste.

Correct disposal of old products and

rechargeable batteries helps prevent

negative consequences for the

environment and human health.

Remove the integrated battery

If there is no collection/recycling system

for electronic products in your country,

you can protect the environment by

removing and recycling the battery

before disposing the headphones.

• Make sure the earphones is

disconnected from the charging box

before removing the battery.

• Make sure the charging box is

disconnected from the USB

charging cable before removing the

battery.

Hereby, MMD Hong Kong Holding Limited

declares that the product is in compliance with

the essential requirements and other relevant

provisions of RED Directive 2014/53/EU and

UK Radio Equipment Regulations SI 2017 No

1206. You can nd the Declaration of

Conformity on www.philips.com/support.

12 EN

Table of contents

Other Philips Headphones manuals

Philips

Philips TAT2206BK/00 User manual

Philips

Philips PN402 User manual

Philips

Philips SHB7150FB/27 User manual

Philips

Philips SBCHD1500U/05 User manual

Philips

Philips SBCHE261 User manual

Philips

Philips SHB8000 User manual

Philips

Philips SBCHJ080 User manual

Philips

Philips Over Ear TAPH805 User manual

Philips

Philips HS-900 User manual

Philips

Philips SHB1300 User manual

Philips

Philips Eargear Bass Beat HS460 User manual

Philips

Philips SBCHC090/09 User manual

Philips

Philips SHE9850 User manual

Philips

Philips EarGear HS910 User manual

Philips

Philips SHC8525/37 User manual

Philips

Philips Nike Sport Motion SHJ047 User manual

Philips

Philips TAT1209 User manual

Philips

Philips SHE2646 User manual

Philips

Philips SHC2000/00 User manual

Philips

Philips SBCHL150 User manual

Philips

Philips SBCHE240/00 User manual

Philips

Philips SHP5401 User manual

Philips

Philips SHE9550 User manual

Philips

Philips TAH5205 User manual

Popular Headphones manuals by other brands

Sony

Sony MDR-NC8 Specifications

AUSounds

AUSounds AU-Stream quick start guide

ENERGY SISTEM

ENERGY SISTEM Style 7 user manual

Insignia

Insignia NS-CAHBTSPORT quick start guide

Movie Vision

Movie Vision HP-400 Operation manual

MobiFren

MobiFren SM Pro user guide

Motorola solutions

Motorola solutions PMLN8120 user manual

Jaybird

Jaybird freedom Faq

Sony

Sony MDR-ED12LP manual

HiFuture

HiFuture Tidy Buds Pro user manual

Creative

Creative CB2530 user guide

Renkforce

Renkforce RF FTVK-100 operating instructions

Sennheiser

Sennheiser 500371 instruction manual

Califone

Califone 2924AV Specifications

Technics

Technics EAH-AZ80 manual

Bose

Bose On-Ear Headphone Limited warranty

Aluratek

Aluratek ABH02F quick start guide

Waterfi

Waterfi swimQ product manual