Philips CRYSTAL 660 - NETWORK User manual

660

RECHARGEABLE/MAINS

English Page 4

• Keep pages 3, 40, 41, and 42 open when reading

these operating instructions.

Français Page 9

• Pour le mode d'emploi: dépliez la page 3 et les pages 40,

41 et 42.

Deutsch Seite 14

• Schlagen Sie beim Lesen der Gebrauchsanweisung Seite

3 und Seiten 40, 41 und 42 auf.

Nederlands Pagina 19

• Sla bij het lezen van de gebruiksaanwijzing pagina 3 en de

pagina's 40, 41 en 42 op.

Italiano Pagina 24

• Prima di usare l'apparecchio, aprite la pagina 3 e le pagine

40, 41 e 42 e leggete attentamente le istruzioni per l'uso.

Español Página 29

• Desplegar la página 3 y las páginas 40, 41 y 42 al leer las

instrucciones de manejo.

Português Página 34

• Durante a leitura do modo de emprêgo, desdobre e

verifique a pág. 3 e as pág. 40, 41 e 42.

For Australian consumers

The rechargeable batteries used in your Philishave

appliance are recyclable.

When discarding the shaver or when the batteries require

replacement, take the shaver to a Philips Service Centre or

authorised agent.

For the address of your nearest service centre or agent

please contact our Customer Information Centre

on telephone (008) 80 3312.

Important

•Please read these instructions carefully in

conjunction with the illustrations (pages 3, 40, 41

and 42) before using the appliance.

•Please bear in mind that your skin may need two

to four weeks to become fully accustomed to the

Philishave shaving system.

•Regular cleaning and maintenance ensures

optimal performance and prolongs the shaver's

working life.

•Do not allow the shaver to come into contact with

water.

•Do not leave the appliance in a very warm place or

in direct sunlight.

•Before first use (or if the shaver has not been

used for a month or longer) it should be charged

for a period of at least 4 hours.

To protect the environment, this

rechargeable Philishave appliance is equipped with a

nickel-hydride battery which contains less than 0.01%

cadmium.

However we advise you to ensure that the battery is

separated from the normal household refuse and disposed

of at an officially assigned place when discarding your

appliance in due course. Please refer to section "Protecting

the environment".

English

General description (fig. 1, page 3)

AShaving unit with three shaving heads. Each shaving

head consists of a guard and a cutter.

BGreen pilot light. Illuminates whilst the shaver is

connected to the mains supply (for charging or shaving

directly from the mains). Goes out as soon as the

rechargeable battery is full.

COn/Off switch. The shaver is prevented from being

switched on accidentally by the locking device

incorporated in the switch.

- On: keep the locking knob on the switch pressed-in

and slide the switch upwards.

- Off: slide the switch downwards.

DMains cord. Using the mains cord you can connect the

shaver to any mains voltage between 100 and 240 Volts

AC (for charging and shaving).

EConnector. When using the mains cord insert the small

plug firmly into the connector up to the indication mark.

FTrimmer. The trimmer can be switched on whilst the

motor is running.

- Switch on by moving the slide (f) upwards.

- Switch off by moving the slide downwards.

- Brush the trimmer clean after use.

GBrush. Refer to section "Maintenance and cleaning" for

correct usage.

HProtective cap. Keep the protective cap on the shaver

when not in use.

Shaving tips

for a close, quick and comfortable shave

• The best results are obtained if the skin is dry. So

preferably shave before washing or some time afterwards.

• If required, apply a preshave lotion. This can be

particularly helpful if the climate is warm and humid.

• The Philishave system gives you a quick, close and

comfortable shave. Just move the shaving unit quickly

over the skin.

• For the best results stretch the skin to bring the hairs into

an upright position.

Then move the shaving unit against the direction of the

growth of the hairs.

• The trimmer has been especially designed for grooming

sideburns, moustache and beard.

The trimmer is not required for long hairs in the neck area;

these hairs can easily be shaved off with the shaving unit.

Charging (voltages in the range 100-240 Volt AC)

•It is advisable to charge the shaver at temperatures

between 5 °C and 35°C (41 °F and 95 °F). This

guarantees maximum life from the rechargeable battery.

• Keep the cassette open if you charge the appliance in it.

- Slide the on/off switch (C) downwards.

- Insert the small plug firmly into the connector (E) up to the

indication mark.

- Then connect to the wall socket. The green pilot light (B)

will come on.

•A full charge requires approx. 1 hour.

• Regular cleaning of the shaver means that less battery

energy is consumed, so that more shaving time becomes

available.

• The shaver will not be damaged by leaving it connected to

the mains supply after it is fully charged.

However, it is not advisable to charge the shaver

permanently as this would shorten the life of the

rechargeable battery.

Shaving directly from the mains

- Slide the on/off switch (C) downwards.

- Connect the appliance to a wall socket.

- Then switch the appliance on.

Maintenance and cleaning (fig. 2-17 on pages 40 and 41)

• Always switch the shaver off before carrying out

maintenance or cleaning.

• The rotating cutter blades of the Philishave system keep

the shaved stubble neatly inside the shaving unit. In

general, the shaving unit needs cleaning only once a

week.

Every week

Fig. 2. Clean the guard slots using the short bristled end of

the brush.

Fig. 3. Pull the shaving unit from the shaver.

Fig. 4 & 5. Clean the inside using the long bristled end of

the brush.

Every three months

If your skin is of an oily type or if you have been using a pre-

shave lotion, this procedure should be carried out once a

month.

Fig. 6. Pull the shaving unit from the shaver.

Fig. 7. Press the wheel downward and turn it anti-clockwise

(see the arrow). Then lift the cluster frame holding

the shaving heads from the shaving unit.

Fig. 8. Slide one shaving head (guard and cutter) out of the

frame. Keep your finger under the shaving head to

prevent the cutter from falling out of the guard.

Fig. 9. Keep the guard and cutter together because

each pair has been especially ground to match

each other. If the guards and cutters are mixed, it

may take a couple of weeks before optimal shaving

performance is restored.

Fig. 10. Hold the cutter as shown...

Fig. 11 ....and brush it carefully clean as illustrated.

Use only the short bristled end of the brush.

Fig. 12.Clean the inside of the guard, using the long bristled

end of the brush.

Fig. 13. Slide the shaving head back into place. Then clean

the other two shaving heads one by one in the

same way.

Fig. 14. Replace the cluster frame with the shaving heads.

Do not forget to secure the cluster frame by

pressing the wheel downward and turning it

clockwise.

Fig. 15. Do not apply any pressure to the guards when

replacing the shaving unit on to the shaver.

Fig. 16. If you have used a degreasing liquid (e.g. alcohol) to

clean the shaving heads, or if your skin is very dry,

lubricate the guards with one drop of light machine

oil.

Every six months

Fig. 17. Put two drops of light machine oil on the teeth of the

trimmer.

Replacement shaving heads

Worn or damaged shaving heads must be replaced only with

the original Philips replacement heads type HP 1917.

Protecting the environment

How to remove the built-in rechargeable battery

(when discarding the appliance) (fig. 18-21, page 42)

• Please note: You can also take the appliance to a Philips

Service Centre. The staff will be happy to help you.

- Remove the plug from the wall socket.

- Before removing the battery should be completely

empty.

Let the appliance run until the motor stops.

- Push the trimmer slide (f) upwards (fig. 18).

- Unscrew the two countersunk screws at the back side of

the shaver. For this purpose you can use a small

screwdriver (width approx. 2 mm) or a Torx T-8 type

screwdriver (fig. 19).

- Remove the back plate of the appliance (fig. 20).

- Cut the two connector strips (fig. 21).

You will recognise the battery by the print NIMH.

Do not connect the appliance to the mains power after

the battery has been removed.

Important

•Lisez attentivement ce mode d'emploi et regardez

tous les dessins des pages 3, 40, 41 et 42 avant

d'utiliser l'appareil.

•Lorsque vous utilisez le système de rasage

Philishave pour la première fois, il est important de

savoir qu'une période d'adaptation de la barbe de 2

à4 semaines est nécessaire pour obtenir

l'efficacitéoptimale du rasage.

•Un nettoyage et un entretien réguliers vous

garantissent de bonnes performances et une

longue durée de vie de l'appareil.

•Evitez tout contact de l'appareil avec l'eau.

•Ne laissez pas l'appareil exposéàde fortes

chaleurs ou aux rayons directs du soleil.

•Lors de la première charge, (ou après une longue

période de non-utilisa-tion), rechargez l’appareil

pendant au moins 4 heures (sans tenir compte des

indications portées sur l’afficheur).

Pour ménager l'environnement, votre

rasoir rechargeable Philips est équipéde

piles àl'hydrure de nickel.

Celles-ci contiennent moins de 0.01 % de cadmium.

Nous vous conseillons toutefois lorsque vous vous

débarrassez de l'appareil en fin d'utilisation, de ne pas jeter

les piles dans les ordures ménagères ordinaires, mais de les

déposer à un endroit désigné à cet effet par les pouvoirs

publics. Veuillez vous référer au chapitre "Protection de

l'environnement".

Description générale (fig. 1, page 3)

AUnitéde rasage avec 3 têtes de rasage (grilles et

couteaux).

BTémoin lumineux vert. S'allume quand le rasoir est

Français

branché sur le secteur (pour recharge et rasage utilisant

le rasoir directement branché sur le secteur). S'éteint

lorsque l' accumulateur est rechargé.

CInterrupteur marche/arrêt, avec sécurité contre la mise

en marche involontaire.

Appuyez sur la sécurité et faites glisser l'interrupeur vers

le haut ou vers le bas.

Mise en marche: appuyez sur la sécurité et faites

glisser l'interrupteur vers le haut.

Arrêt: faites glisser l'interrupteur vers le bas.

DCordon d'alimentation. Le cordon d'alimentation

permet d'utiliser l'appareil sur des tensions secteur de

100 à 240 Volts AC.

EConnecteur. Enfoncez bien la fiche dans le connecteur

jusqu'au repère.

FTondeuse. La tondeuse peut être mise en service

pendant que le moteur fonctionne.

- Pour cela, faites glisser le curseur (f) vers le haut.

- Pour l'arrêter, ramenez le curseur vers le bas.

- Nettoyez la tondeuse avec la brosse après chaque

utilisation.

GBrosse. Lisez le chapitre "Entretien et nettoyage" pour

utiliser correctement la brosse.

HCapot de protection. Remettez le capot sur l'unité de

rasage après chaque utilisation.

Conseils de rasage

pour un rasage rapide, agréable et de très près.

• On obtient les meilleurs résultats quand la peau est bien

sèche. Il est donc préférable de se raser avant de se laver

ou quelque temps après.

• Utilisez éventuellement une lotion de pré-rasage, ce qui

assure un rasage plus agréable, particulièrement en climat

chaud et humide.

• Le système Philishave vous assure un rasage rapide,

agréable et de très près.

Déplacez rapidement la tête de rasage sur la peau.

• Pour obtenir un meilleur rasage, tendez la peau pour

redresser les poils et rasez à rebrousse-poils avec des

mouvements circulaires.

Other manuals for CRYSTAL 660 - NETWORK

This manual suits for next models

Table of contents

Languages:

Other Philips Electric Shaver manuals

Philips

Philips QG 3060 User manual

Philips

Philips HP6345 User manual

Philips

Philips NORELCO 7000 Series User manual

Philips

Philips HQ6 User manual

Philips

Philips HQ6613/16 User manual

Philips

Philips HQ489/24 User manual

Philips

Philips SP9810 User manual

Philips

Philips SBT720 User manual

Philips

Philips RQ1187CC User manual

Philips

Philips Norelco Speed-XL 8171XL User manual

Philips

Philips 6000 Series User manual

Philips

Philips 350 User manual

Philips

Philips AT621 User manual

Philips

Philips Styleshaver Pro QS6140 User manual

Philips

Philips Shaver S9000 Prestige Ultimate Closeness Instruction Manual

Philips

Philips SmartTouch-XL HQ9199 User manual

Philips

Philips NT5650 User manual

Philips

Philips HQ8160/16 User manual

Philips

Philips Essence 5000 Series User manual

Philips

Philips HQ5715 User manual

Philips

Philips HP6383 User manual

Philips

Philips HQ 6890/A User manual

Philips

Philips Norelco 6000 Series User manual

Philips

Philips S3000 Series User manual

Popular Electric Shaver manuals by other brands

Norelco

Norelco Quadra 7610X owner's manual

Braun

Braun WaterFlex WF2s manual

Daga

Daga MT-400 Directions for use

Remington

Remington BHT100 user manual

Kompernass

Kompernass KH 5537 operating instructions

Remington

Remington BHT6100 manual

MIA

MIA Aqua Body manual

Matheo

Matheo MLR 15 manual

CTC Union

CTC Union Clatronic HSM 3441 NE instruction manual

Remington

Remington XR7000 user manual

Eldom

Eldom G47 manual

Braun

Braun silk-epil 5 manual

SEVERIN

SEVERIN SÉRIE E700 0533 Dimensions

Remington

Remington PR1355 manual

Aurora

Aurora AU 3543 manual

Braun

Braun InterFace 3614 user manual

Wahl

Wahl 8061 5-STAR operating manual

Norelco

Norelco 4404LC Specifications