Philips DC190 User manual

DC190

EN User manual

English

1 Important

Safety

Important Safety Instructions

aRead these instructions.

bKeep these instructions.

cHeed all warnings.

dFollow all instructions.

eDo not use this apparatus near water.

fClean only with dry cloth.

gDo not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

hDo not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers)

that produce heat.

iProtect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

j Only use attachments/accessories specied by the

manufacturer.

kUse only with the cart, stand, tripod, bracket, or

table specied by the manufacturer or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury

from tip-over.

lUnplug this apparatus during lightning storms or when

unused for long periods of time.

m Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

nApparatus shall not be exposed to dripping or splashing.

oDo not place any sources of danger on the apparatus (e.g.

liquid lled objects, lighted candles).

pThis product may contain lead and mercury. Disposal of

these materials may be regulated due to environmental

considerations. For disposal or recycling information, please

contact your local authorities or the Electronic Industries

Alliance: www.eiae.org.

qWhere the MAINS plug or an appliance coupler is used as

the disconnect device, the disconnect device shall remain

readily operable.

Warning

Never remove the casing of this apparatus.•

Never lubricate any part of this apparatus.•

Never place this apparatus on other electrical equipment.•

Keep this apparatus away from direct sunlight, naked ames or heat. •

Ensure that you always have easy access to the power cord, plug or•

adaptor to disconnect the apparatus from the power.

Notice

Any changes or modications made to this device that are not

expressly approved by Philips Consumer Lifestyle may void the user’s

authority to operate the equipment.

Recycling

Your product is designed and manufactured with high

quality materials and components, which can be recycled

and reused.

When you see the crossed-out wheel bin symbol attached

to a product, it means the product is covered by the

European Directive 2002/96/EC:

Never dispose of your product with other household

waste. Please inform yourself about the local rules on the separate

collection of electrical and electronic products. The correct disposal

of your old product helps prevent potentially negative consequences

on the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make

the packaging easy to separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene (bags, protective foam

sheet.)

Your system consists of materials which can be recycled and reused

if disassembled by a specialized company. Please observe the local

regulations regarding the disposal of packaging materials, exhausted

batteries and old equipment.

2 Your Docking Entertainment

System

Congratulations on your purchase, and welcome to Philips!To fully

benet from the support that Philips offers, register your product at

www.philips.com/welcome.

Introduction

With this unit, you can enjoy audio from the iPod, other audio devices,

or the radio.

The radio, iPod, or buzzer can be set as the alarm timer.You can set two

alarm timers to go off at different times.

What’s in the box

Check and identify the contents of your package:

Main unit•

1 x AC adaptor•

1 x MP3 link cable•

User manual•

Quick start guide•

Overview of the main unit

aALARM 1/ALARM 2

Set the alarm timer.•

View the alarm time.•

Turn off the alarm tone.•

bREPEAT ALARM/BRIGHTNESS CONTROL

Repeat the alarm.•

Adjust the display brightness.•

Turn on the unit or switch to standby mode.•

dSOURCE

Select a source: iPod, FM tuner or MP3 link.•

ePRESET +/-

Select a preset radio station.•

Adjust time.•

fDisplay panel

Show current status.•

gDock compartment

Start or pause iPod play.•

Skip to the previous/next audio le.•

Search within an audio le.•

jTUNING +/-

Tune to a radio station.•

Adjust time.•

kTIME SET/AUTO SCAN

Set the clock.•

Scan radio stations.•

lWAKE TO iPod/RADIO/BUZZ

Select alarm mode.•

mMP3-LINK

Jack for an external audio device.•

nDC IN

Power supply socket.•

oiPod dock

Load an iPod player.•

pVOL +/-

Adjust volume.•

Adjust time.•

qSLEEP

Set the sleep timer.•

3 Get started

Caution

Use of controls or adjustments or performance of procedures other•

than herein may result in hazardous radiation exposure or other

unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number

of this apparatus.The model number and serial number are on the

bottom of the apparatus.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Connect power

Caution

Risk of product damage! Ensure that the power voltage corresponds•

to the voltage printed on the back or underside of the apparatus.

Risk of electric shock! When you unplug the AC adaptor, always pull

•

the plug from the socket. Never pull the cord.

Before connecting the AC adaptor, ensure you have completed all

•

other connections.

Note

The type plate is located on the bottom of the main unit.•

1Connect one end of the AC adaptor to the DC IN socket on

the main unit.

2Connect the other end of the AC adaptor to the wall outlet.

Set clock

1In standby mode, press and hold TIME SET/AUTO SCAN for

2 seconds.

The hour digits begin to blink.»

2Press TUNING +/- to set the hour.

3Press TIME SET/AUTO SCAN.

The minute digits begin to blink.»

4Press TUNING +/- to set the minute.

5Press TIME SET/AUTO SCAN to conrm.

The week day digits begin to blink.»

6Press TUNING +/- to set the week day.

7Press TIME SET/AUTO SCAN to conrm.

Turn on

1Press .

The unit switches to the last selected source.»

Other manuals for DC190

This manual suits for next models

Table of contents

Other Philips Docking Station manuals

Popular Docking Station manuals by other brands

Sony

Sony Dream Machine XDR-DS12iP user manual

Acer

Acer USB Type-C Dock II user manual

ATEN

ATEN UC-2000 user manual

Xcellon

Xcellon HDD-202 user manual

Dok

Dok CR09 user guide

IOGear

IOGear Travel Pro GUD3C09 quick start guide

RKI

RKI SDM-E2 Operator's manual

iHome

iHome iP15 instruction manual

VITURE ONE

VITURE ONE MOBILE DOCK quick start guide

Lindy

Lindy 42984 user manual

CipherLab

CipherLab 8001 quick guide

Pyle

Pyle PIPDSP2 owner's manual

Avol

Avol AS2350 user manual

Datalogic

Datalogic JoyaTouch quick start guide

Targus

Targus DOCK315EUZ user guide

Akasa

Akasa DuoDockX3 AK-DK08U3-BK user manual

Sirius Satellite Radio

Sirius Satellite Radio SUBX2082808a Installation and user guide

OWC

OWC Thunderbolt Dock user guide