Philips AS 130 User manual

www.philips.com/support

Always there to help you

AS130

User manual

Question?

Contact

Philips

1EN

Contents

1 Important 2

Important Safety Instructions 2

2 Your docking speaker for Android™ 3

Introduction 3

What's in the box 3

Overview of the docking speaker 4

3 Get started 5

Connect power 5

Turn on 5

Set time 5

Adjust display brightness 6

4 Play through Bluetooth 6

Compatible with Android™ 6

Play audio through manual Bluetooth

connection 6

Play audio through auto Bluetooth

connection with Philips Bluetooth

Audio Connect 7

Disconnect a device 10

5 Dock and charge Android-

powered phone 11

6 Play through audio cable 12

7 Adjust volume 12

8 Product information 13

General information 13

Bluetooth 13

Amplier 13

Speakers 13

9 Troubleshooting 14

General 14

About Bluetooth device 14

10 Notice 15

Compliance 15

Recycling 15

Trademark notice 15

2EN

1 Important

Important Safety Instructions

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or

otherapparatus(includingampliers)that

produce heat.

• Protect the power cord from being

walked on or pinched, particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

• Onlyuseattachments/accessoriesspecied

by the manufacturer.

• Only use power supplies listed in the user

manual.

• Unplug this apparatus during lightning

storms or when unused for long periods

of time.

• Referallservicingtoqualiedservice

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

• Apparatus shall not be exposed to

dripping or splashing.

• Do not place any sources of danger on the

apparatus(e.g.liquidlledobjects,lighted

candles).

• Where the plug of the Direct Plug-in

Adaptor is used as the disconnect device,

the disconnect device shall remain readily

operable.

3EN

2 Your docking

speaker for

Android™

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/support.

Introduction

With this docking speaker, you can:

• enjoy audio through Bluetooth connection,

• enjoy audio through an audio input cable,

and

• charge your Android-powered devices.

What's in the box

Check and identify the contents of your

package:

• Main unit

• Power adapter

• Audioinputcable(3.5mmconnectors)

• Short user manual

• Safety and notice

Quick start guide

4EN

Overview of the docking

speaker

a POWER

• Press to turn on the docking speaker

or switch it to standby mode.

b DC IN

• Connect to the power adapter.

c VOL/TIME +

• Increase the volume.

• Set the clock.

d BRIGHTNESS/SET TIME

• Adjust the brightness of display.

• Press and hold to start setting the

clock.

e Display panel

f - VOL/TIME

• Decrease the volume.

• Set the clock.

g Micro USB connector

h AUDIO IN

• Connect to the audio output socket

(usuallytheheadphonesocket)ofan

external device.

i Wheel

• Rotate to adjust the height of micro

USB connector.

5EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Connect power

Caution

• Risk of product damage! Make sure that the power

supply voltage matches the voltage printed on the

bottom of the docking speaker.

• Risk of electric shock! When you unplug the AC

adapter, always pull the plug from the socket. Never

pull the cord.

Note

• The type plate is located on the bottom of the docking

speaker.

Connect the AC power adapter between

• the DC IN socket at the back of the

docking speaker, and

• the power supply.

Turn on

Press POWER to turn on the docking speaker.

» The Bluetooth indicator blinks on the

display panel.

• To switch the docking speaker to

standby mode, press POWER again.

Switch to standby mode automatically

The docking speaker automatically switches to

standby mode when

• no audio input cable is connected to the

AUDIO IN socket, and

• the Bluetooth connection is invalid for 15

minutes.

Set time

1 Press and hold BRIGHTNESS/SET TIME

for two seconds.

» [24H] or [12H] begins to blink.

2 Press - VOL/TIME or VOL/TIME + to

select [24H] or [12H] for 24 or 12 hour

format.

3 Press BRIGHTNESS/SET TIMEtoconrm.

» The hour and minute digits begin to

blink.

4 Press - VOL/TIME or VOL/TIME +

repeatedly to set the hour.

5 Press BRIGHTNESS/SET TIMEtoconrm.

» Minute digits begin to blink.

6 Press - VOL/TIME or VOL/TIME +

repeatedly to set the minute.

7 Press BRIGHTNESS/SET TIMEtoconrm.

» The set time is displayed.

ON Standby

POWER

6EN

Adjust display brightness

Press BRIGHTNESS/SET TIME repeatedly to

select a brightness level.

4 Play through

Bluetooth

With AS130, you can enjoy audio in two ways:

• through manual Bluetooth connection;

• through automatic Bluetooth connection

with Philips Bluetooth Audio Connect

app.

Compatible with Android™

To make full use of your docking speaker, your

Android-powered device should meet the

following requirements:

• with Android operating system (Version

2.1orabove),

• with Bluetooth software (Version 2.1 or

above),and

• with a micro USB connector.

For other devices with micro USB connector

and Bluetooth function, you can still use the

docking speaker to

• charge your device through the USB

connector, and

• enjoy audio through Bluetooth.

Play audio through manual

Bluetooth connection

The docking speaker uses Bluetooth wireless

technology to stream music from your portable

device to the speaker.

7EN

Note

• Philips does not guarantee the compatibility with all

Bluetooth devices.

• Before pairing a device with this docking speaker, read

its user manual for Bluetooth compatibility. Make sure

that the connected Bluetooth device supports the

AdvancedAudioDistributionProle(A2DP)andthe

AudioVideoRemoteControlProle(AVRCP).

• The product can memorize a maximum of 4 paired

devices.

• Make sure that Bluetooth function is enabled on your

device, and your device is set as visible to all other

Bluetooth devices.

• The operational range between this docking speaker

and a Bluetooth device is approximately 10 meters

(30feet).

• Any obstacle between this docking speaker and a

Bluetooth device can reduce the operational range.

• Keep away from any other electronic device that may

cause interference.

Pair with Bluetooth devices

1 Press POWER to turn on the docking

speaker.

» The Bluetooth indicator blinks on the

display panel.

2 On your Android-powered devices,

activate the Bluetooth feature and search

for AS130.

3 In the device list, tap PHILIPSAS130.

» After a successful connection, AS130

beeps twice and the Bluetooth

indicator turns steadily on.

4 Play audio on your Bluetooth device.

» Audio comes out through the docking

speaker.

Tip

• To clear paired devices from AS130, press and hold

POWERforveseconds.

Play audio through auto

Bluetooth connection with

Philips Bluetooth Audio

Connect

Philips Bluetooth Audio Connect establishes

automatic Bluetooth connection by adding a

shortcut of your docking system to the Home

screen of your Android-powered device.To

8EN

enjoy the feature, you are recommended to

download and install this free app.

Install Philips Bluetooth Audio

Connect app

You can search Philips Bluetooth Audio

Connect from Google Play directly, and then

install the app.

Note

• Make sure that your Android device is connected to

the Internet.

• Make sure that Google Play is available on your

Android device.

1 Search for Philips Bluetooth Audio

Connect app on the Play Store of your

device.

2 Fromthesearchresultlist,ndandtap

Philips Bluetooth Audio Connect to start

downloading.

3 Follow the onscreen instructions to install

the Philips Bluetooth Audio Connect.

4 When installation is complete, tap Done.

» Two Philips Bluetooth Audio Connect

widgets are installed and saved at the

widgets screen.

Add the Philips widget to your Home

screen

Apps

Add one or both of the widgets to the Home

screen of your Android device (refer to the

usermanualofyourdevice).

• Philips Bluetooth Audio Connect 2 X 1:

add one of your favorite Bluetooth devices

• Philips Bluetooth Audio Connect 4 X

1: add three of your favorite Bluetooth

devices

Activate Bluetooth with Philips

Bluetooth Audio Connect app

Add AS130 to your Home screen

Note

• Make sure that AS130 is switched on.

Add device

Add device Add device Add device

Other manuals for AS 130

Table of contents

Other Philips Docking Station manuals

Popular Docking Station manuals by other brands

Sony

Sony Dream Machine XDR-DS12iP user manual

Acer

Acer USB Type-C Dock II user manual

ATEN

ATEN UC-2000 user manual

Xcellon

Xcellon HDD-202 user manual

Dok

Dok CR09 user guide

IOGear

IOGear Travel Pro GUD3C09 quick start guide

RKI

RKI SDM-E2 Operator's manual

iHome

iHome iP15 instruction manual

VITURE ONE

VITURE ONE MOBILE DOCK quick start guide

Lindy

Lindy 42984 user manual

CipherLab

CipherLab 8001 quick guide

Pyle

Pyle PIPDSP2 owner's manual

Avol

Avol AS2350 user manual

Datalogic

Datalogic JoyaTouch quick start guide

Targus

Targus DOCK315EUZ user guide

Akasa

Akasa DuoDockX3 AK-DK08U3-BK user manual

Sirius Satellite Radio

Sirius Satellite Radio SUBX2082808a Installation and user guide

OWC

OWC Thunderbolt Dock user guide