Philips AJB4600 User manual

www.philips.com/welcome AJB4600

EN User manual

All manuals and user guides at all-guides.com

all-guides.com

1 Important

 Read these instructions.

 Heed all warnings.

 Follow all instructions.

 Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

 Do not install near any heat sources such as radiators, heat registers,



 Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point where

they exit from the clock radio.

 

 Unplug this clock radio during lightning storms or when unused for

long periods of time.

 

when the clock radio has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the clock radio, the clock radio has been exposed to

rain or moisture, does not operate normally, or has been dropped.

 This clock radio shall not be exposed to dripping or splashing.

 Do not place any sources of danger on the clock radio (e.g. liquid



 Where the plug of the Direct Plug-in Adapter is used as the

disconnect device, the disconnect device shall remain readily operable.

All manuals and user guides at all-guides.com

2 Your DAB clock radio

Congratulations on your purchase, and welcome to Philips! To fully



www.philips.com/welcome.

What’s in the box

Check and identify the contents of your package:

AJB4600

www.philips.com/welcome

User Manual

All manuals and user guides at all-guides.com

3 Get started

Prepare FM/DAB antenna

For better reception, fully extend and adjust the position of the FM/

DAB antenna.

Note

 To prevent interference, position the antenna as far as possible

from TV,VCR, or other radiation source.

Connect power

Caution

 Risk of product damage! Ensure that the power voltage

corresponds to the voltage printed on the back or underside of

the clock radio.

 Risk of electric shock! When you unplug the AC adaptor, always

pull the plug from the socket. Never pull the cord.

All manuals and user guides at all-guides.com

Note

 The type plate is located at the bottom of the clock radio.

Set time

1 Press and hold SOURCE for two seconds.

» [STANDBY] is displayed.

2 Press and hold SET TIME for two seconds.

» The current time is displayed.

» The hour digits begin to blink.

3 Press TUNING / to set the hour.

4 Press SET TIME

» The minute digits begin to blink.

All manuals and user guides at all-guides.com

5 Press TUNING / to set the minute.

6 Press SET TIME

Note

 

hour/minute digits blink, go directly to step 2 to set time.

All manuals and user guides at all-guides.com

all-guides.com

4 Listen to Digital Audio Broadcasts

(DAB)



through a network of transmitters. It provides you with more choice,

better sound quality and more information.

Tune to DAB radio stations

Note

 Make sure that the antenna is fulled extended.

1 Press SOURCE repeatedly to select DAB mode.

» [Full SCAN]

2 Press SELECT to start full scan.

» The unit stores all the DAB radio stations automatically in



» The station list is memorized in the unit. Next time when you

turn on the unit, the station scan does not take place.

» If no DAB station is found, [NO DAB] 

To tune to a station from the available station list:

In DAB mode, press TUNING / to navigate through the available

DAB stations.

All manuals and user guides at all-guides.com

Scan DAB radio stations automatically

Tip

 New stations and services will be added in the DAB broadcast.

To make new DAB stations and services available, perform full

scan regularly.

In DAB mode, press and hold PROG/AUTOSCAN for 3 seconds.

» The unit stores all the available DAB radio stations automatically.

» 

Store DAB radio stations manually

You can store up to 20 DAB radio stations in preset channel.

1 Tune to a DAB radio station.

2 Press PROG/AUTOSCAN to activate the storing mode.

3 Press PRESET to select a preset number.

» If this position is occupied, the previous stored DAB station name

will be displayed;

» If this position is empty, the preset number will be displayed;

4 Press PROG/AUTOSCAN

5 Repeat steps 1-4 to store other stations.

Note

 To remove a pre-stored DAB radio station, store another station

in its place.

All manuals and user guides at all-guides.com

Listen to a preset DAB radio station

In DAB mode, press PRESET to select a preset number.

Display DAB information

1 Tune to a DAB radio station.

2 Press INFO/MENU repeatedly to scroll through the following



» 

» 

» 

» 

» Ensemble

» Freq channel

» 

» Bitrate

» Codec

» Time

» Date

Use DAB menu

1 In DAB mode, press and hold INFO/MENU for two seconds to

access DAB menu.

2 Press TUNING / to scroll through the menu options:

 [Full scan]: scan all the available DAB radio stations.

All manuals and user guides at all-guides.com

 [Manual]: 

add it to the station list.

 [DRC]: add or remove a degree of compensation for the

differences in the dynamic range between radio stations.

 [Prune]: Remove all the invalid stations from the station list.

 [System]: Adjust system settings.

3 To select an option, press SELECT.

4 Repeat steps 2-3 if sub-option is available under one option.

[DRC]

 [DRC high]

 [DRC low]

 [DRC off]

Note

 

station.

[System]

 [Reset]: reset all the settings to factory default.

 [Upgrade]: update software if available.

 [SW ver]: know the software version of the unit.

 [Time]: select 24H or 12H mode; and set time synchronization.

Note

 [System] > [Time] > [Update] > [DAB] to set time synchronization.

The clock radio will synchronize time with DAB signal.

 If the system is idle for 15 seconds, the menu exits.

All manuals and user guides at all-guides.com

Other manuals for AJB4600

Table of contents

Other Philips Clock Radio manuals

Popular Clock Radio manuals by other brands

Denver

Denver CRQ-105 quick start guide

Audiovox

Audiovox CE90 Operation instructions

Sony

Sony Dream Machine ICF-C763L operating instructions

Sanyo

Sanyo DMP-P6 instruction manual

RCA

RCA RPC100 user manual

Yamaha

Yamaha ISX-80 owner's manual

Pyle

Pyle PLMR20W user manual

Blaupunkt

Blaupunkt CR7BK user manual

HoMedics

HoMedics SS-5500-2EU instruction manual

RCA

RCA RC66i user manual

Versaudio

Versaudio Vers user manual

SOUNDMASTER

SOUNDMASTER UR8100 instruction manual

Audiovox

Audiovox CE90 operating instructions

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio instruction manual

Roberts

Roberts ChronoDAB user manual

AEG

AEG MRC 4132 BT instruction manual

Tokai

Tokai TC-155 user manual

Timex

Timex T300 manual