Philips HR1727 User manual
Comfort
HR1727, HR1724, HR1721, HR1720
2
3
4
General description
Blender
AMotor unit
BOn/Off/Pulse knob
CBlender jar with level indication
DBlade unit
ESealing ring
FLid
GMeasuring cup
Mill (only types HR1721 and HR1727)
HJar
ISealing ring
JBlade unit
Filter (only types HR1724 and HR1727)
KFruit filter
Important
Read these instructions for use carefully and look at the illustrations
before using the appliance.
Keep these instructions for future reference.
General
◗Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
◗If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗Always unplug the appliance from the mains before assembling,
disassembling or making adjustments to any of the accessories.
◗Never switch the appliance on and off by turning the accessories.
◗Never immerse the motor unit in water or any other fluid, nor
rinse it under the tap. Use only a moist cloth to clean the motor
unit.
◗Never let the appliance run unattended.
ENGLISH6
◗Keep the appliance out of the reach of children.
◗Avoid touching the blades, especially when the appliance is
plugged in.The blades are very sharp!
◗Never reach into the blender jar with your fingers or an object
while the appliance is running.
◗Never place the blade unit onto the motor unit without having
the (blender or mill) jar properly attached.
◗If the blades get stuck, unplug the appliance before removing the
ingredients that are blocking the blades.
If necessary use a spatula to remove food from the wall of the jar after
you have switched off the appliance.
◗Always make sure that the blade unit is correctly assembled
before you plug the appliance in and switch it on.
◗Never use any accessories or parts from other manufacturers
that have not been specifically advised by Philips. Your guarantee
will become invalid if such accessories or parts have been used.
Blender
◗Never fill the blender jar with ingredients that are hotter than
80cC.
◗To prevent spillage, do not put more than 1.25 litre of liquid in
the blender jar, especially when you are processing at a high
speed. Do not put more than 1 litre in the blender jar when you
are processing hot liquids or recipes that create a great deal of
foam.
◗Never forget to place the sealing ring on the blade unit before
assembling the blender jar, otherwise leakage will occur.
◗Always make sure the lid is properly closed and the measuring
cup has been inserted properly before you switch the appliance on.
Mill
◗Never use the mill for more than 30 seconds without
interruption.Allow the mill to cool down for at least 1 minute
between the processing cycles.
ENGLISH 7
◗Never forget to place the sealing ring in the blade unit before
you assemble the mill jar, otherwise leakage will occur.
◗Never use the mill to grind very hard ingredients such as nut-
meg, Chinese rock sugar and ice cubes.
◗Always process cloves, star anise and aniseed together with
other ingredients. If processed separately, these ingredients may
attack the plastic materials of the appliance.
◗The mill beaker may become discoloured when the mill is used
to process ingredients such as cloves, anise and cinnamon.
◗The mill is not suitable for chopping raw meat. Use the blender
instead.
◗Do not use the mill to process liquid mixtures such as fruit juice.
Filter
◗Never use the filter to process ingredients hotter than 80cC.
◗Never overload the filter. Do not put more than 50g of dried soy
beans or 150g of fruit in the filter at the same time.
◗Always make sure the lid is properly closed and the measuring
cup has been inserted properly before you switch the appliance
on.
◗Cut the fruit into smaller pieces before putting it in the filter.
◗Soak dried pulses, such as soy beans, before putting them in the
filter.
Before first use
Thoroughly clean the parts which will come in contact with food
before you use the appliance for the first time (see 'Cleaning').
Using the appliance
Measuring cup (G)
You can use the measuring cup to measure ingredients or to prepare
mayonnaise.
™The oil should be added very slowly to obtain the right consistency. Run
the blender at a low speed when preparing mayonnaise
ENGLISH8
Blender
The blender can be used for pureeing very finely and for blending. It can
be used for preparing soups, sauces, milkshakes, vegetables, fruits, thin
batters etc.
Preparing the blender for use
1Assemble the sealing ring (E) on the blade unit (D) (fig. 1).
2Screw the blade unit anticlockwise onto the bottom of the
blender jar (C) until the blade unit is fixed properly (fig. 2).
3Mount the blender jar, with the blade unit attached onto the
motor unit (A) and fix it by turning it clockwise until you hear a
'click' .The blender jar can be mounted in two positions
(fig. 3 and fig. 4).
4Make sure that the appliance is plugged in.
How to use the blender
1Put the ingredients into the blender jar.
2Place the lid on the blender jar.
3Close the lid by pushing it down and turning the lid clockwise
until you hear a 'click' (fig. 5).
4Insert the measuring cup into the opening in the lid.
5Turn the control knob to speed 1 or 2.
Turn the control knob to 'pulse' position if you want to process
ingredients very briefly.
6Do not let the appliance run for more than 3 minutes at a time.
Disassemble the blender
1Unplug the appliance.
2Remove the lid and the measuring cup from the blender jar.
3Remove the blender jar with the blade unit attached to it from
the motor unit.
4Always clean all the removable parts after using the appliance.
ENGLISH 9
Tips
- If you want to crush ice cubes, put not more than 6 ice cubes (of
approx. 24x35x25mm) in the blender jar and turn the control knob
to pulse position a few times.
- Cut meat or other solid ingredients into smaller pieces before
putting them in the blender jar.
- Do not process a large quantity of solid ingredients at the same
time.To get good results, we advise you to process these
ingredients in a series of small batches.
- To make tomato juice, cut the tomatoes in four and drop the
pieces through the opening in the lid onto the rotating blades.
Filter (Only types HR1724 and HR1727)
With this filter you can make delicious fresh fruit juices, cocktails or soy
milk.The filter prevents pips and skins from ending up in your drink.
Never overload the filter. Do not put more than 50g of unsoaked
dried soy beans or 150g of fruit in the filter at the same time.
Preparing the filter for use
1Mount the blender jar, with the blade unit attached onto the
motor unit (A) and fix it by turning it clockwise until you hear a
'click'.The blender jar can be mounted in two positions
(fig. 3 and fig. 4).
2Put the filter (K) in the blender jar (fig. 6).
Make sure that the grooves of the filter fit exactly onto the ribs inside
the blender jar.
3Make sure that the appliance is plugged in.
How to use the filter
1Place the lid (F) on the blender jar.
Cut fruits into smaller pieces or pre-soak dry hard beans, such as soy
beans, before putting into filter.
2Put the ingredients in the filter (fig. 7). Do not fill the filter beyond
the top of the sieve mesh.
ENGLISH10
Other manuals for HR1727
1
This manual suits for next models
3
Table of contents
Languages:
Other Philips Blender manuals
Philips
Philips HR1845 User manual
Philips
Philips HR2201/81 User manual
Philips
Philips HR1751/81 User manual
Philips
Philips HR1724/06 User manual
Philips
Philips HR1843/55 User manual
Philips
Philips HR7761 User manual
Philips
Philips HR 1700 User manual
Philips
Philips HR1617/00 User manual
Philips
Philips Cucina HR1757 User manual
Philips
Philips HR1741/80 User manual
Philips
Philips HR7510 User manual
Philips
Philips Robust Collection HR2181/00 User manual
Philips
Philips HR1652 User manual
Philips
Philips HR1605/00 User manual
Philips
Philips HR1639 series User manual
Philips
Philips HR2621 User manual
Philips
Philips HR2071 Operating manual
Philips
Philips HR1364 User manual
Philips
Philips HR2621 User manual
Philips
Philips Avance HR2202/80 User manual
