Philips Essence HR2084 User manual

www.philips.com/welcome

HR2084

ENGLISH 6

DANSK 15

DEUTSCH 24

ESPAÑOL 45

SUOMI 55

FRANÇAIS 64

ITALIANO 73

NEDERLANDS 83

NORSK 93

PORTUGUÊS 102

SVENSKA 112

TÜRKÇE 121

138

147

Introduction

Congratulations on your purchase and welcome to Philips!

product at www.philips.com/welcome.

General description (Fig. 1)

AGraduated measuring cup

BLid

CBlander jar with level indication

DSealing ring

EBlade unit

FBlade unit interface

GMotor unit

HControl knob

IFilter

Important

Read this user manual carefully before you use the appliance and save it

for future reference.

General

Danger

it under the tap. Use only a moist cloth to clean the motor unit.

Warning

- Check if the voltage indicated on the appliance corresponds to the

local mains voltage before you connect the appliance.

order to avoid a hazard.

are damaged.

- Never use the blender jar to switch the appliance on and off.

- Never let the appliance run unattended.

- This appliance is not intended for use by persons (including children)

instruction concerning use of the appliance by a person responsible for

their safety.

- Children should be supervised to ensure that they do not play with

the appliance.

The blades are very sharp.

ENGLISH

Caution

adjustments to any of the parts.

enters the connection point of the blender jar on the motor unit.

- Never use any accessories or parts from other manufacturers or that

Blender

Warning

the appliance is running.

- Make sure the blade unit is securely fastened to the blender jar before

you assemble the blender jar onto the motor unit.

- Do not touch the cutting edges of the blender blade unit when you clean

ingredients that block the blades.

Caution

or ingredients that tend to foam.

unplug it.Then use a spatula to remove the food from the wall.

- Never forget to place the sealing ring on the blade unit before you

- Always make sure the lid is properly closed/assembled on the jar and

the measuring cup is inserted properly in the lid before you switch on

the appliance.

Filter

Caution

- Always make sure the lid is closed/assembled properly and the

measuring cup is inserted properly in the lid before you switch on

the appliance.

This Philips appliance complies with all standards regarding electromagnetic

available today.

ENGLISH 7

Built-in safety lock

This feature ensures that you can only switch on the appliance if you have

properly assembled the blender jar on the motor unit. If the blender jar is

,Thoroughly clean the parts that will come in contact with food

Using the appliance

Control knob

,If you want to use a speed between MIN and MAX, turn the control

knob to the desired position.

speed (MAX).

,If you want to use the Smoothie function, turn the control knob

from position OFF to the Smoothie position.

,If you want to use the Ice or Pulse function, just press the desired

quick-select button.

Smoothie function

Use this function to prepare delicious smoothies.When you turn the

Smoothies are thick drinks made of frozen or fresh fruit and fruit juices

and add more frozen or fresh fruit to make a thicker smoothie.

Ice button

The blender is equipped with a special Ice button for crushing ice.The

appliance starts crushing ice when you press the Ice button. As soon as you

ENGLISH8

Pulse button

As soon as you press the Pulse button the appliance starts running at the

immediately.The Pulse button can also be used while the appliance is

running at a speed between MIN and MAX.

Blender

With the blender you can prepare soups, sauces, milk shakes and

batters.You can also use the blender to process vegetables, fruit

and meat.

Preparing the blender for use

1 Place the sealing ring on the blade unit.

2 Assemble the blade unit onto the blade unit interface.

3 Screw the blade unit interface onto the bottom of the blender jar

4 Place the blender jar with the blade unit interface attached on

You can place the blender jar on the motor unit in two positions: with

the handle pointing to the right or to the left.

5 Put the plug in the wall socket.

Using the blender

1 Put the ingredients in the blender jar.



ENGLISH 9

2 Place the lid on the blender jar.

3 Insert the measuring cup into the opening in the lid.

4 Select a speed by turning the control knob or push one of the quick-

Do not let the appliance run for more than 3 minutes at a time. If you

let it cool down to room temperature before you let it run again.

5 Always switch off the appliance by setting the control knob to OFF

before you open the lid.

After using the blender

1 Unplug the appliance.

2 Remove the lid with the measuring cup from the blender jar.

3 Remove the blender jar with the unit interface attached from the

motor unit.

4 Unscrew the blade unit interface from the bottom of the blander jar.

5 Always clean the removable parts immediately after use.

Tips

- Cut meat or solid ingredients into smaller pieces before putting them

in the blender jar.

- Do not process a large quantity of solid ingredients at the same time.

Process these ingredients in a series of small batches instead.

through the opening in the lid onto the rotating blades.

Measuring cup

You can use the measuring cup to measure ingredients or to prepare

mayonnaise.

,To prepare mayonnaise, you can punch a hole in the middle of

the bottom of the measuring cup with a knife or another sharp

implement to use the measuring cup as a funnel for adding oil when

preparing mayonnaise.The oil should be added very slowly to obtain

the right consistency. Let the blender operate at a low speed when

preparing mayonnaise.

Note: Once you have punched a hole in the measuring cup, it cannot be used

as a measuring cup anymore.

ENGLISH10

Filter

in your drink.

1 Place the blender jar with the blade unit interface attached on

The blender can be placed on the motor unit in two positions.

the blender jar.

3 Make sure the appliance is plugged in.

1 Put the lid on the blender jar.

Make sure you place the lid on the blender jar in such a way that the drink

can be poured out through the strainer in the lid.

4 Insert the measuring cup into the hole in the lid.

Note: when you are processing a large quantity, we advise you not to put all

and let the appliance run for a few seconds.Then switch off the appliance

and add another small quantity, but do not exceed the top of the sieve mesh.

Repeat this procedure until you have processed all the ingredients.Always keep

the lid on the blender jar during processing.

1 Switch off the appliance and remove the blender jar from the motor

unit.

2 Pour out the drink via the pouring lip of the blender jar. Make sure

the lid is placed on the blender jar in such a way that the drink can

be poured out through the strainer in the lid.

Recipe

,Soy milk



ENGLISH 11

Other manuals for Essence HR2084

Table of contents

Languages:

Other Philips Blender manuals

Popular Blender manuals by other brands

ROTOR

ROTOR 1125.201 instruction manual

Braun

Braun Multiquick 5 Vario series User instructions

ARENDO

ARENDO MIRA 305424 user manual

CHEF-BUILT

CHEF-BUILT CCB-3500 instruction manual

Viconte

Viconte VC-4406 instruction manual

Oster

Oster BLSTAB-CB0 user manual

HOFFEN

HOFFEN MC-3005 instruction manual

Black & Decker

Black & Decker BLC18750DM user guide

Sunbeam

Sunbeam 4182 user manual

Bialetti

Bialetti FMX35 Instructions for use

Black & Decker

Black & Decker BL8000 user manual

Duronic

Duronic BL530 manual

Exquisit

Exquisit MS 3002 wes instruction manual

Lumme

Lumme LU-KP1891A user manual

Binatone

Binatone HB-735 instruction manual

Moulinex

Moulinex LM936E10 manual

Oster

Oster VERSA Performance guide

Ninja

Ninja NN210Q instructions