Phihong POE370U-480-8N User manual

Phihong Midspan POE GUI

User Manual

SNMP v3, v2, v1 Rev. 1.2

PES12781

Compliant Models:

POE125U-8N

POE370U-480-8N

POE370U-480-16N

POE370U-480-24N

POE576U-8ATN

POE576U-16ATN

POE576U-24AFATN

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-2-

Disclaimer

Phihong accepts no accountability or liability arising from the use of the Midspans, as described in

this document. The handling of equipment will be users’ responsibility. Applications described in this

document are for descriptive purposes only. Phihong does not provide warranty on modiﬁed products.

Notice

This document contains information about the software and hardware used on the Midspan. The

information is held to be accurate and reliable from time of print. Please be advised that product

development and revisions are still in course of action. Phihong cannot be held responsible for

involuntary error, exclusions, inaccuracies, or following changes of printed material.

Phihong reserves the right to make changes to products and to their speciﬁcations as described in this

document, at any time, without prior notice. The contents of this document may not be photocopied

or reproduced in any form without written permission of Phihong.

NOTE: Midspans are for indoor use only!

This document is subject to change without notice.

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-3-

Contents

1. Safety Procedures

1.1. General Precautions ............................................................................................................... 6

2. Midspan Hardware Setup

2.1. Physical Hardware Appearance ............................................................................................. 8

2.2. Powering Your Midspan ......................................................................................................... 9

2.3. Connecting Ethernet Cables ................................................................................................ 10

2.4. Connecting USB and Power Cables .................................................................................... 10

2.5. Powering Up ......................................................................................................................... 11

2.6. LED Indicators ...................................................................................................................... 11

2.7. Rack-Mounting Installation .................................................................................................. 12

2.8. Technical Speciﬁcations ...................................................................................................... 13

3. Phihong GUI and USB Driver Installation

3.1. PC-to-Midspan Connection via USB/RS232 ....................................................................... 15

3.2. USB Block Diagram ............................................................................................................. 16

4. Midspan GUI

4.1. GUI Main Window ................................................................................................................ 17

4.2. GUI System Control and Information ................................................................................... 18

4.3. GUI Port Description ............................................................................................................ 20

4.4. GUI Parametric Information ................................................................................................. 22

5. Midspan Troubleshooting .......................................................................................................... 23

6. Appendix

A. Optional RPS – option R ........................................................................................................ 24

B. Optional NIC Interface – option N

1. NIC Interface Setup .......................................................................................................... 25

2. Advanced Setup Options .................................................................................................. 27

3. Controller Setup ................................................................................................................ 28

3.1. System Administration ............................................................................................. 29

3.2. SNMP Settings ......................................................................................................... 33

4. DHCP Client – Dynamic and Static Mode Setup .............................................................. 36

5. Setup NIC Midspan with Phihong GUI ............................................................................. 37

C. SNMP MIB Controls ............................................................................................................... 39

D. SSL .......................................................................................................................................... 45

1. Getting Started ................................................................................................................... 45

2. Installing Cygwin ................................................................................................................ 45

3. Generating Security Certiﬁcates ........................................................................................ 49

4. Load Security Certiﬁcates .................................................................................................. 51

4.1 Load Certiﬁcates into Midspan SNMP Card .............................................................. 51

4.2 Load Certiﬁcates into Internet Explorer ...................................................................... 53

4.3 Load Certiﬁcates into Mozilla Firefox ......................................................................... 55

5. Enable SSL ........................................................................................................................ 57

6. Access Via SSL .................................................................................................................. 58

7. Troubleshooting ................................................................................................................. 59

7.1 Regenerating Root Certiﬁcates .................................................................................. 60

E. Frequently Asked Questions ................................................................................................... 52

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-4-

List of Figures:

Figure 1 – Midspan is not connected .................................................................................................. 8

Figure 2 – Data & Power (top row), Data (bottom row) ........................................................................ 8

Figure 3 – Connectors and Indicator ................................................................................................... 8

Figure 4 – Rear Side of Midspan ......................................................................................................... 8

Figure 5 – DC Power Connector ......................................................................................................... 8

Figure 6 – AC Power Connector .......................................................................................................... 8

Figure 7 – Midspan connected through ‘Data & Power’ line ............................................................. 10

Figure 8 – NIC Cable ......................................................................................................................... 10

Figure 9 – USB Cable ........................................................................................................................ 10

Figure 10 – USB Cable Connected ................................................................................................... 10

Figure 11 – AC Power Cord ............................................................................................................... 10

Figure 12 – Rack-Mounted Midspan ................................................................................................. 12

Figure 13 – Rack Mounting Bracket and Screws .............................................................................. 12

Figure 14 – Technical Speciﬁcations ................................................................................................. 13

Figure 15 – GUI Setup ....................................................................................................................... 15

Figure 16 – PC-to-Midspan Connection via USB/RS232 .................................................................. 15

Figure 17 – USB Block Diagram ........................................................................................................ 16

Figure 18 – GUI Main Window ........................................................................................................... 17

Figure 19 – GUI Connection Information ........................................................................................... 17

Figure 20 – System Setup, Control, System Information and Port Commands ................................ 18

Figure 21 – System Update ............................................................................................................... 19

Figure 22 – Port Description .............................................................................................................. 20

Figure 23 – LED Key (Port Status) ..................................................................................................... 21

Figure 24 – Parametric Information ................................................................................................... 22

Figure 25 – DC Power Connector ..................................................................................................... 24

Figure 26 – PC-to-Network-to-Midspan Diagram ............................................................................. 25

Figure 27 – Ethernet Manger .............................................................................................................. 26

Figure 28 – Controller Login .............................................................................................................. 27

Figure 29 – Controller Main Window ................................................................................................. 28

Figure 30 – Controller System Administration ................................................................................... 29

Figure 31 – Controller Firmware Backup ........................................................................................... 31

Figure 32 – Controller Firmware Update ........................................................................................... 31

Figure 33 – Reboot System ................................................................................................................ 32

Figure 34 – Controller SNMP Settings .............................................................................................. 33

Figure 35 – GUI Connection Information (USB) ................................................................................ 34

Figure 36 – GUI User Security Parameters ....................................................................................... 34

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-5-

Figure 37 – Ethernet Manager Set IP Address .................................................................................. 35

Figure 38 – Local Area Connection Status ......................................................................................... 36

Figure 39 – Local Area Connection Properties/Internet Protocol Properties .................................... 36

Figure 40 – GUI User Security Parameters ....................................................................................... 37

Figure 41 – GUI User Security Parameters/Ethernet Manager ......................................................... 37

Figure 42 – GUI Connection Information (SNMP) ............................................................................. 38

Figure 43 – GUI Main Window ........................................................................................................... 38

Figure 44 – Network Domain Diagram .............................................................................................. 43

Figure 45 – Cygwin Welcome Screen ................................................................................................. 45

Figure 46 – Cygwin Choose Installation Screen ................................................................................. 46

Figure 47 – Cygwin Installation Directory Screen ............................................................................... 46

Figure 48 – Cygwin Connection Type Screen .................................................................................... 47

Figure 49 – Cygwin Choose Download Site ....................................................................................... 47

Figure 50 –Cygwin Installation Directory Screen ................................................................................ 48

Figure 51 – Cygwin Installation Progress ........................................................................................... 48

Figure 52 – Cygwin Command Prompt Screen .................................................................................. 49

Figure 53 – Cygwin Command Prompt Screen Continued ................................................................ 50

Figure 54 – Midspan Directory ........................................................................................................... 51

Figure 55 – Loading Certiﬁcate to Midspan ....................................................................................... 52

Figure 56 – Certiﬁcate Import Wizard ................................................................................................. 53

Figure 57 – Select Certiﬁcate Store .................................................................................................... 54

Figure 58 – View Certiﬁcates .............................................................................................................. 55

Figure 59 – Load Root Certiﬁcate ...................................................................................................... 56

Figure 60 – Downloading Certiﬁcate .................................................................................................. 56

Figure 61 – Enabling SSL ................................................................................................................... 57

Figure 62 – Access via SSL ................................................................................................................ 58

Figure 63 – Regenerating Root Certiﬁcate ......................................................................................... 60

Figure 64 – Regenerating Root Certiﬁcate Continued ....................................................................... 61

List of Tables:

Table 1: LED Indicator ....................................................................................................................... 12

Table 2: Electrical Speciﬁcations ....................................................................................................... 14

Table 3: Troubleshooting ................................................................................................................... 23

Table 4: DC Speciﬁcations ................................................................................................................ 24

Table 5: Controller Setup ................................................................................................................... 30

Table 6: SNMP Settings .................................................................................................................... 32

Table 7: SNMP MIB Controls ............................................................................................................. 39

Table 8: SSL Troubleshooting ............................................................................................................. 59

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-6-

1. Safety Procedures

1.1. General Precautions

General – Please read the following precautions carefully before installing and connecting the system

to a power source.

Note – Only qualiﬁed and trained service personnel (in accordance with IEC 60950 and AS/NZS

3260) should install, replace, or service the equipment. Install the system in accordance with Country,

National or to the U.S. National Electric Code if you are in the United States.

Precautions:

1. The building facilities in which the product will be used requires a fuse or circuit breaker no larger

than 15A for 120Vac (U.S.A.) or 10A, 230Vac (international). The building facilities must protect the

Midspan from over current or short-circuits.

2. Before connecting the Midspan to a power source (including power cord requirements), read

the Midspan Hardware Setup procedure in Section 2. This procedure as with all procedures and

instructions can be found in the Midspan User Manual. To download a copy of the Manual, visit

www.phihong.com.

3. To prevent the Midspan from overheating, do not operate the product in an area that exceeds the

maximum recommended ambient temperature of 40°C. Allow at least 3 to 4 inches of clearance

around all ventilation openings.

4. In order to Support the Midspan weight, do not stack the chassis on any other equipment. Shelf

mounted equipment requires a stable and durable surface. When installed, do not push or pull on

the Midspan when the equipment is installed.

5. The Midspan consists of two rows of “Data” and “Data & Power” ports. The ports use RJ-45

data sockets. Do not connect telephone cables into these ports. Only RJ-45 data cables may be

connect to these sockets.

6. Do not work on the Midspan system or connect or disconnect the cables, during periods of lightning

activity.

7. The AC or DC plus/socket combination must be accessible at all times, as it serves as the main

disconnect device to the product.

8. Before servicing the product, always disconnect the products from its AC and DC source.

9. Disposal of this product should abide by all appropriate National laws and regulations.

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-7-

1.1 Sicherheitsmaßnahmen – Allgemeine Vorsichtsmaßnahmen

Allgemein – Lesen Sie die folgenden Vorsichtsmaßnahmen sorgäﬂtig durch, bevor Sie das System

installieren und an eine Energiequelle anschließen.

Hinweis – Das Gerät derf nur durch qualiﬁziertes und ausgebildeten Dienstpersonal (gemäß IEC

60950 [Vorschrift 60950 der Internationalen Elektrischen Kimmission] und AS/NZS 3260 [Vorschrift für

Australien und Neuseeland]) installiert, ersetzt oder repariert werden. Installieren Sie das System auch

in Übereinstimmung mit den geltenden nationalen oder europäischen Vorschriften bzw. Der NEC-

Vorschrift, falls Sie sich in den Vereinigten Staaten beﬁnden.

Vorsichtsmaßnahmen:

1. Die Gebäudeinstallationen, in denen das Produkt benutzt wird, müssen über eine Sicherung

oder einen Schutzschalter mit maximal 15A für 120 Vac (USA) oder 10A für 230Vac (international)

verfügen. Dis Gebäudeinstallationen müssen das Midspan-Device vor zu starkem Strom oder

Kurzchlüssen schützen.

2. Lesen Sie vor dem anschließen des Midspan-Device an eine Energiequelle (einschließlich der

erforderlichen Anschlussleitungen) die Setup-Anleitung für Ihre Midspan-Hardware in Kapitel 2

genau durch. Dieses Verfahren wird zusammen mit allen weiteren Vorgängen und Anweisungen

im Benutzerhandbuch für das Midspan-Device beschrieben. Sie Können das Benutzerhandbuch

unter www.phihong.com herunterladen.

3. Um das Midspan-Device vor Überhitzung zu schübenutzen Sie das Produkt nicht in Räumen,

die maximale empfohlene Umgebungstemperatur von 40°C überschreiten. Lassen Sie um alle

Lüftungsöffnungen herum mindestens 7,5 bis 10 cm (3-4 inches) frei.

4. Stützen Sie das Gewicht des PoE Midspan-Device nicht ab, indem Sie das Gehäuse auf ein

anderes Gerät stellen. Falls Sie das Gerät auf ein Gestell montieren, muss dieses eine stabile und

haltbare Oberﬂäche haben. Nach der Installation des Systems bewegen Sie das Midspan-Device

nicht mehr.

5. Das Midspan-Device enthält zwei Reihen mit “Datenports” und “Daten-und-Stromports.” Die

Ports verwenden RJ45-Datenanschlüsse. Schließen Sie keine Kabel an und trennen Sie keine

Kabelverbindungen während Gewittern mit Blitzen.

6. Führen Sie an dem Midspan-System keine Arbeiten durch schließen Sie keine Kabel an und trennen

Sie keine Kabelverbindungen während Gewittern mit Blitzen.

7. Der Steckanschluss für Gleich- oder Wechselstrom muss jederzeit zugänglich sein, da er als

Haupttrenngerät für das Produkt dient.

8. Trennen Sie das Produkt immer erst von der Stromquelle, bevor Sie Wartung oder reparaturarbeiten

daran durchführen.

9. Entsorgen Sie dieses Produkt gemäß aller geltenden Gesetze und Vorschriften Ihres Landes und

der EU (falls Sie sich in einem Land der EU beﬁnden).

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-8-

2. Midspan Hardware Setup

2.1 Physical Hardware Appearance:

Front Side of the Midspan:

Figure 1: The Midspan is not Connected

Figure 2: Data & Power (top row), Data (bottom row)

Data &

Power

Data

Figure 3: Connectors and Indicators

NIC Port*

USB Port

AC LED

RPS LED*

Rear Side of the Midspan:

Figure 4: The Rear Side of the Midspan

Pin Description

1 +47VDC to +57VDC

2 Current Share

3 -47VDC to -57VDC

4 +47VDC to +57VDC

5 Not Used

6 -47VDC to -57VDC

Figure 5: DC Power Connector*

DC IN:Molex, 6 pin p/n 39-30-0060 or equivalent

DC IN Mate: Molex, 39-01-2065, pin p/n 39-00-0077

Figure 6: AC Input Connector

AC IN: IEC320 inlet 3 pin

* Optional Components - please see appendices A and B

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-9-

2.2 Powering Your Midspan

Power Cord Requirements

Power cords must meet the requirements for the country it is intended to be used.

U.S.A. and

Canada

• The cord must have a minimum of 10A rated current competence

• The cord must be CSA or UL approved

• The minimum requirement for the ﬂexible cord is:

18 AWG (10A)

Three-Conductor (Line, Neutral, Ground)

Type SV (stranded Vacuum Rubber Jacketed) or SJ (stranded Junior

Rubber Jacketed) or SVT (Stranded Vacuum Rubber Jacketed

Thermoplastic) or SJT (Stranded Junior Thermoplastic)

• The plus must be earth-grounded with a NEMA 5-15 (15A, 125V) or NEMA

6-15P (15A, 250V) conﬁguration

Europe Switzerland

• The supply plug must comply with SEV/ASE 1011

Denmark

• The supply plug must comply with section 108-2-D1, standard DK2-1a or

DK2-5a

United Kingdom

• The Midspan is covered by General Approval (section 16.16.060,

NS/G/12345/J100003, for indirect connection to a public

telecommunication system

France and Peru

• IT equipment cannot power this device. In the case of an IT powered

device, the unite needs to be powered by 230V through an isolation

transformer with a ratio of 1:1 and the secondary connection (Neutral) is

properly grounded

• The Midspan must have access to a nearby power outlet. By disconnecting the power cord

from the outlet, you will eliminate power from the device.

• The ﬂexible cord that connects to the Midspan must have a conﬁguration to connect with an

EN60320/IEC320 inlet connector.

• According to the EN60950/IEC 950 speciﬁcations this device functions under SELV (Safety

Extra Low Voltage) conditions. The conditions are true if the equipment and the connected

device functions under SELV conditions.

Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678

www.phihong.com or www.midspans.com

-10-

2.3 Connecting Ethernet Cables*

Figure 7: POE370U-480-24N connected through ‘data & power’ line

Figure 8: NIC Cable Connected*

Figure 9: USB Cable* Figure 10: USB Cable Connected

Figure 11: AC Power Cord**

2.4 Connecting USB and Power Cables

USB cable:

The USB cable is connected to the USB connector located in the front side of the Midspan and a USB

port on your PC/laptop.

AC power cord:

The AC power cable is connected to the AC power connector located in the rear side of the Midspan

and the power outlet.

*Ethernet and USB cables are not included

**AC power cord may be ordered separately

This manual suits for next models

Table of contents

Other Phihong Switch manuals

Phihong

Phihong PES12779 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual