Phaesun PN-XFlex 83W Setup guide
Phaesun GmbH · Brühlweg 9 · 87700 Memmingen · Germany · Telefon +49 (8331)990 42 - 0 · Telefax +49 (8331)990 42 -12 · info@phaesun.com · www.phaesun.com
Stand 10/2013 JAZStand 10/2013 JAZ
Solar Modul PN-Flex 83 W, Solar Modul PN-Flex 100W:
flexible, lightweight, thin-layer solar module 12V, fluoropolymer for the use
with 12Volt rechargeable batteries
This manual includes information about safety, operation, capacity and main-
tenance of the module, as well as technical instructions which you should
make yourself familiar with before you use your solar panel! Please read
these instructions carefully before installation!
Safety Warnings
This manual does not list all precautions needed for safe work.
Follow local guidelines.
Modules may not be folded or creased during handling and storage. They
may only be rolled up to a diameter of no less than 20 cm (8 inches)
Voltage of a single module is not dangerous.
Never connect more than 2 modules in series (24 V-systems)
Work under dry conditions with dry tools.
Solar modules exposed to sunlight produce DC electricity. Live parts may
cause electric shock. Avoid contact with the metal terminal leads in order
to reduce the risk of electrical shock.
Use electrically insulated tools when wiring modules.
Observe proper polarity when connecting the module into an electrical
circuit. Reverse connection will damage the module and may result in fire
and/or personal injury (Figure1).
Do not use non-rechargeable batteries!
Please follow safety and operating instructions of all batteries and electri-
cal equipment in your system.
Avoid partially shading modules under load to prevent hot spots and/or
reduction in power.
Artificially concentrated sunlight shall not be directed onto the module.
Do not carry the module by the wires.
Do not cut, scratch, disassemble or puncture the Module.
When trimming the adhesive from around the perimeter of the module,
do not cut the module in any way.
Do not stand or walk on the module.
Do not immerse unconnected connectors in liquid.
Do not drop or allow objects to fall onto the Module.
Do not attempt to open, or otherwise dismantle the junction box
Installation
1. Choose an appropriate position to assemble your panel on a solid surface.
2. Fix the module in a position that ensures the cell surface is inclined
towards the sun and choose a location where the solar module is able to
absorb as much sunlight as possible.
3. Connect the solar panel to your battery through an appropriate charge
controller (not included in delivery).
Observe correct polarity (+) and connect the terminal of the extension ca-
ble correspondingly with the positive battery pole, the charge controller, or
any other optional 12 V device and the (–) terminal with the negative pole
Reverse connection will damage the module and may result in fire and/or
personal injury
Do not immerse your panel entirely period in water for an extended period
Transportation and storage
Never roll up the panel too tightly, the minimum diameter must be 20 cm,
otherwise the module could be damaged.
Cleaning
Clean module surfaces only with alcohol, window cleaner, or a mild soap &
water solution and a lint-free cloth
Never use any pointed, or sharpedged items on it since they might damage
the panel surface!
Modules may only be
rolled up to a diameter of
no less than 20 cm (8 in).
flexible Modules may not be
folded or creased during
handling and storage.
water-resistant
Safety and Installation Manual
Solar Modul PN-XFlex 85W / 100W
Phaesun GmbH · Brühlweg 9 · 87700 Memmingen · Germany · Telefon +49 (8331)990 42- 0 · Telefax +49 (8331)990 42 -12 · info@phaesun.com · www.phaesun.com
Troubleshooting
1. Function: You can check the solar panel output with a multimeter.
2. Connections: Check the cabling for loose wires or corrosion. Check the
polarity!
3. Voltage: Check the open-circuit voltage between the positive (+) and the
negative (–) connections by means of a voltmeter
4. Battery: Make sure your battery is efficient and rechargeable. In case of
need consult your battery trader to get the exact details and instructions
of battery testing.
5. Capacity: Make sure your system components are properly selected and
installed. Consult your dealer to get more information and advice.
Electrical Specifications (Measured under Standard Test Conditions)
PN-XFlex 83W PN-XFlex 100W
Article No. 310103 310104
Power (Pmax in W) 83 100
Voltage at Pmax (Vmp in V) 16,67 19,4
Current at Pmax (Imp in A) 5,00 5,00
Open Circuit Voltage (Voc in V) 22,5 26,5
Short Circuit Current (Isc in A) 6,35 6,35
Power Tolerance not to exceed –10%, +10%
External Dimensions
Length 2944 +/– 5 mm 1801 +/– 5 mm
Width 454 +/– 5 mm 911 +/– 5 mm
Weight 3,30 kg 4,00 kg
Temperature Coefficients
Power –0,23%/°C (±10 %)
Voc –0,39%/°C (±10 %)
Isc +0,11%/°C (±10 %)
Standard Test Conditions: 25°C, 1 kW/m2, AM 1.5
Warranty
The legal period of warranty shall be applied. In case the product is defect,
please consult your manufacturer or dealer. For warranty processing, or
repair, please forward an invoice copy and the reason for rejection and/or a
description of malfunction.
Phaesun GmbH grant a warranty of two years from the original date of
purchase of the new product on provided that it can be excluded that the
product has been used inappropriately.
Limitation of Warranty
The warranty does not include any damages to assembly components caused
by inappropriate use, handling or assembly, repair, loss in transit, or damages
through a mischance or caused by fire, the intervention of third parties or
acts of God.
Disclaimer
The liability shall be limited to the repair of the defective product or a replace-
ment delivery for faulty workmanship respectively.
The liability of this warranty shall not include damages of any other kind, any
loss of profits or any other consequential loss, liability for income which can
customarily be achieved with the product(s) sold, shall be ruled out.
Figure 1
positive / +
negative / –
This manual suits for next models
3
Other Phaesun Control Unit manuals
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
