Pfaff creative EMBELLISHMENT ATTACHMENT User manual
creative™EMBELLISHMENT ATTACHMENT
DA creative™EMBELLISHMENT ATTACHMENT
Vigtige Sikkerhedsanvisninger
DE creative™STICKSET FÜR BÄNDER-, WOLLE-,
UND PERLEN- EFFEKTE
Wichtige Sicherheitshinweise
ES ACCESORIO PARA BORDADOS CON
ADORNOS CIRCULARES CREATIVE
Instrucciones De Seguridad Importantes
FI creative™KORISTELULISÄLAITE
Tärkeitä Turvaohjeita
FR GUIDE DE BRODERIE CIRCULAIRE
Consignes De Sécurité Importantes
IT ACCESSORIO PER ABBELLIMENTI CREATIVI
Istruzioni Importanti Di Sicurezza
NO creative™EMBELLISHMENT ATTACHMENT
Viktige Sikkerhetsinstruksjoner
NL PFAFF®creative™VERSIERAPPARAAT
Belangrijke Veiligheidsinstructies
RU УСТРОЙСТВО ДЛЯ УКРАШЕНИЯ CREATIVE
Важные Инструкции По Технике Безопасности
SE creative™EMBELLISHMENT ATTACHMENT
Viktiga Säkerhetsföreskrifter
TR YARATICI SÜSLEME APARATI
ÖNEMLİ GÜVENLİK TALİMATLARI
ZH 创意装饰品附件
重要安全说明
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this household accessory.
When using an electrical appliance and it’s accessories, basic safety precautions should always be
followed, including the following:
Keep the instructions at a suitable place close to the machine. Make sure to hand them over if
the machine is given to a third party.
This appliance is intended for use by adults. The appliance can be used with adult supervision by
(i) children aged from 8 to 12 years and (ii) persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given instruction concerning
use of the appliance in a safe way and understand the hazards involved. Cleaning and user
maintenance shall not be made by children without supervision. It is not allowed for anyone to
play with the machine. Children up to 8 years are not allowed to use the machine.
WARNING –TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSON:
• Do not allow to be used as a toy. Close attention is necessary when the accessory is used with a
machine or near children.
• Use this accessory only for its intended use as described in this manual.
• Never operate this accessory if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is being ad-
ministered.
• Never operate the appliance with any air openings blocked. Keep ventilation openings of the
sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.
• Never drop or insert any object into any opening.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Never place other objects on the accessory.
• Do not use the accessory if it is wet.
• If the cord to the accessory is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualied person, in order to avoid a hazard.
• For household use. Only use with the sewing machine(s) recommended in this manual.
• Return the accessory to the nearest authorized dealer or service center for examination, repair,
electrical or mechanical adjustment.
• Keep ngers away from all moving parts. Special care is required around the sewing machine
needle.
SAVE THESE INSTRUCTIONS
1
A
B
C
F
G
D
H
I
L
K MJ
N
E
creativeTM Embellishment Attachment - Overview
A. Embellishment Unit
B. Spool Holder
C. Spool Lock
D. Release Lever
E. Connection Plug
F. Yarn/Bead Base
G. Threading Channel
H. Ribbon Base
I. Adjustable Guide
J. Spool Storage Unit
K. Winder
L. Spool
M. Attachment Holder
N. Threading Wire
Introduction
With the Creative Embellishment Attachment you can create embroideries with a texture that literally stands out!
Rather than simple stitches on the surface of the fabric, the texture of the ribbon, yarn or bead results in
embroideries that seem to jump off of the material.
The creative™Embellishment Attachment (CEA) is here referred to as “Embellishment Attachment”.
2
1
2
3
1
2
3
Remove a Base from the
Embellishment Unit
There are two interchangeable bases to use for the
embellishment embroideries. One is used when em-
broidering with ribbons and one is used for yarn and
strings of beads.
1. Place the Embellishment unit of the Embellish-
ment Attachment with the underside up.
2. To remove the interchangeable base, press the
release button down and turn the guide in a clock-
wise direction.
3. Lift off to remove it.
Getting Started
This instruction provides a guide to setting up the Embellishment Attachment. Special tips for each technique
is found in the respective technique tutorial in your sewing and embroidery machine. Find the Ribbon, Yarn and
String of Beads embroidery tutorials in the “Embellishment Attachment” or “Embroidery Accessories” sections.
To see which designs you can make using the Creative Embellishment Attachment, please see your Sampler Booklet
mySewnet Library.
1. Place the Embellishment unit with the underside
up.
2. To attach the base to use, place it on top of the
embellishment unit. The red mark on the embel-
lishment unit and the mark on the guide should
match.
3. Lock the guide in position by turning it counter
clockwise until it clicks in place.
Mount a Guide to the
Embellishment Unit
1
2
3 4
43
3
1
2
3
3
4
4
The length of the embellishment needed for a design
is listed in the Sampler Booklet and in the Quick Help
available for each embellishment color block.
1. Place the spool in the spool storage unit, with the
rectangular slot to the right if you are winding rib-
bons. Insert the embellishment into the slot.
2. Place the circular opening to the right if winding
strings of beads or yarn. Insert the embellishment
into the slot.
3. The winder has one end that is split in two. This
end is used to hold the embellishment in place
whilst starting to wind. Insert the split end of the
winder into the hole in the right end of the spool.
4. Start winding by spinning the winder away from
you.
Note: If your ribbon has a right and wrong side, wind the
ribbon with the right side down.
Tip: To avoid the embellishment from unraveling when handling
the spool, place the end of the embellishment in the notch on the
spool.
Wind the Embellishments on
to the Spool
Place the Spool in the Spool
Holder
1. Place the base unit of the Embellishment Attach-
ment with the front up.
2. Place the Embellishment Attachment so that the
spool holder is positioned to the left. Place the
spool in the holder so that the embellishment reels
off in a counter clockwise motion (it should fall
under the base unit to the right of the spool).
3. For easier handling when threading, the spool
could be locked in the spool holder. Turn the lock
two steps to lock the spool in the holder.
Note: If using ribbons or yarn, unlock again before starting to
embroider, otherwise the tension could be affected. See respective
technique tutorial.
4
1
2
3
This section describes how to thread the ribbon to
the base. For instructions about how to thread yarn or
beads into the base, see next section.
Turn the Embellishment Attachment over for easier
threading.
Once the ribbon is placed under the rst threading
guide on the spool holder, continue threading through
the second and third ribbon guide.
Thread the ribbon through the fourth adjustable
ribbon guide.
Thread Ribbon into the Base
Thread Yarn or Beads
into the Base
This section describes how to thread yarn or beads
into the base. Note that the images only show beads.
The process is similar for yarn.
Insert the end of the yarn or string of beads into the
eye of the threading wire. Carefully pull the yarn or
string into the smaller eye of the wire (1). This is to
hold the yarn in place whilst you pull it through the
threading channel.
When using beads, leave one bead outside the eye.
Place the threading wire over the rst threading guide
on the spool holder, then insert the wire into the
threading channel (2).
Pull the threading wire to draw the yarn through the
threading channel. Do not remove the yarn or string
of beads from the threading wire (3).
More instructions on how to thread the Embellishment attach-
ment is found in the respective technique tutorial.
While holding the ribbon in place rotate the wheel of the adjustable base until the edges of the base match the
width of the ribbon. Do not tighten too much, the ribbon should lay at. (If the opening in the adjustable base
is too tight, rst turn the wheel counter clockwise.)
Carefully pull out about 1½” (4 cm) of ribbon outside the Embellishment Attachment.
More instructions on how to thread the Embellishment attachment is found in the respective technique tutorial.
5
1. Slide the embroidery hoop into the hoop attach-
ment from front to back until it clicks into place.
2. Touch “OK” to conrm.
3. Remove the presser foot and the presser foot
ankle.
4. Position the attachment holder onto the presser
foot bar from below.
5. Insert and tighten the screw.
Attach the Hoop and Fasten the
Holder
Before attaching the Embellishment Attachment to the
machine, make sure that the red markings are correctly
aligned.
Two markings must match; the marking on the inner
guide and the marking on the base unit.
If the inner markings don’t match, hold the Embellish-
ment Attachment with one hand, turn the inner guide
with the other until the two red markings match.
Do not rotate the attachment manually when it is
plugged in to the machine.
Align the Markings on the
Embellishment Attachment
6
Attach the Embellishment
Attachment
When reaching an embellishment block in a design,
the presser foot and needle will automatically be set
into correct position.
(The presser foot should be raised to “up position” and the
needle raised to its highest.)
Tilt the Embellishment Attachment and insert it from
behind carefully. Make sure that the red markings align
with the needle. Slide the Embellishment Attachment
towards you onto the holder until it snaps into place.
Plug in the Embellishment
Attachment
Plug the cord into the accessory socket at the back of
the sewing head of your machine.
When the Embellishment Attachment is plugged in, a
pop-up message will appear and inform you that the
Embellishment Attachment needs to calibrate. Touch
OK. The Embellishment Attachment will cali-brate
and move to the ready position.
Note: When plugged in, the pivot height of the Embellishment
Attachment must be adjusted to fit the height of the embel-
lishment. The pivot height is set in the temporary embroidery
settings menu.
7
1
This section describes how to start your embroidery with ribbons. For instructions about how to start
embroidery with yarn or beads, see next page. Find the Ribbon embroidery tutorial in the “Embellishment At-
tachment” or “Embroidery Accessories” sections.
1. Unlock the spool two steps (1).
2. Press start/stop to begin to embroider.
After a few stitches, your machine will stop so that you can cut the ribbon. Carefully cut the ribbon underneath
the Embellishment Attachment.
Your machine will guide you through the embroidery! Pop-ups will appear on the screen telling you what to do!
Start your Embroidery: Ribbon
8
Start your Embroidery: Yarn or String of Beads
This section describes how to start embroider with yarn or string of beads. Note that the images only show
string of beads. The process is similar for yarn (see previous page). Find Yarn and String of Beads embroidery
tutorials in the “Embellishment Attachment” or “Embroidery Accessories” sections.
1. Move the yarn towards you, away from the needle.
2. Press start/stop to begin to embroider.
3. Hold still while the machine sews a few stitches to fasten the thread. The machine stops.
4. Move the yarn backwards so that it carfully pushes the thread back behind the needle. The yarn should be
behind the needle.
5. Press start/stop to begin to embroider.
6. The machine will sew a few stitches to fasten the yarn. Hold it in place with the threading wire.
7. After a few stitches, your machine will stop so that you can cut the yarn. Carefully cut the yarn underneath the
Embellishment Attachment.
Your machine will guide you through the embroidery! Pop-ups will appear on the screen telling you what to do!
This manual suits for next models
1
Table of contents
Other Pfaff Sewing Machine manuals
Pfaff
Pfaff Sewing Machine Guide
Pfaff
Pfaff Select 3.0 User manual
Pfaff
Pfaff 1245 User manual
Pfaff
Pfaff 71 User manual
Pfaff
Pfaff Coverstyle User manual
Pfaff
Pfaff CREATIVE 4.0 - User manual
Pfaff
Pfaff select 2.0 User manual
Pfaff
Pfaff 8304-020 User manual
Pfaff
Pfaff 3371-1 series Guide
Pfaff
Pfaff 245 User manual
Pfaff
Pfaff ambition 1.0 User manual
Pfaff
Pfaff Creative Vision User manual
Pfaff
Pfaff 1244 User manual
Pfaff
Pfaff expression 150 User manual
Pfaff
Pfaff Powerline 2545 Guide
Pfaff
Pfaff Creative Vision Manual
Pfaff
Pfaff 1529 User manual
Pfaff
Pfaff EXPRESSION 2038 - User manual
Pfaff
Pfaff 141 User manual
Pfaff
Pfaff 333-712/02 User manual
