Pfaff 3582-2/01 User manual
Instruction Manual
3582-2/01
296-12-18 572/002
Betriebsanleitung engl. 03.2002
This instruction manual applies to machines from the
following serial numbers onwards:
# 006141101
This instruction manual applies to all versions and subclasses listed under
"Specifications".
Reprinting, copying or translation of PFAFF instruction manuals, whether in whole or in part,
is not permitted without our prior permission and not without written indication of the
source.
PFAFF Industrie Maschinen AG
Postfach 3020
D-67653 Kaiserslautern
Königstr. 154
D-67655 Kaiserslautern
Editing/illustrations
HAAS-Publikationen GmbH
D-53840 Troisdorf
Table of contents
Contents .......................................................................................... Chapter
Register 01
Safety ........................................................................................................................... 1
Register 02
Proper use .................................................................................................................... 2
Specifications ............................................................................................................... 3
Disposal of the machine ............................................................................................... 4
Transport, packaging and storage ................................................................................. 5
Explanation of the symbols .......................................................................................... 6
Register 03
Controls ........................................................................................................................ 7
Register 04
Mounting and commissioning the machine .................................................................. 8
Register 05
Preparation ................................................................................................................... 9
Register 06
Sewing ....................................................................................................................... 10
Register 07
Care and maintenance ................................................................................................ 11
Adjustment ................................................................................................................. 12
Register 08
Circuit diagrams ......................................................................................................... 13
Register 09
Parts list .........................................................................................................................
Register 10
Miscellaneous ................................................................................................................
Register 01
Contents .......................................................................................... Chapter
1Safety ........................................................................................................................ 1 -1
1.01 Directives .................................................................................................................. 1- 1
1.02 General notes on safety ............................................................................................ 1-1
1.03 Safety symbols ......................................................................................................... 1 - 2
1.04 Important points for the user .................................................................................... 1 - 2
1.05 Operating and specialist personnel ........................................................................... 1 - 3
1.05.01 Operating personnel .................................................................................................. 1 - 3
1.05.02 Specialist personnel .................................................................................................. 1 - 3
1.06 Danger .......................................................................................................................1- 4
1 - 1
Safety
1 Safety
1.01 Regulations
This machine is constructed in accordance with the European regulations indicated in the
conformity and manufacturer's declarations.
In addition to this instruction manual, please also observe all generally accepted, statutory
and other legal requirements, including those of the user's country, and the applicable pol-
lution control regulations!
The valid regulations of the regional social insurance society for occupational accidents or
other supervisory authorities are to be strictly adhered to!
1.02 General notes on safety
●The machine must only be operated by adequately trained operators and only when the
instruction manual has been fully read and understood!
●All notices on safety and the instruction manual of the motor manufacturer are to be read
before the machine is put into operation!
●All notes on the machine concerning danger and safety must be observed!
●The machine must be used for the purpose for which it is intended and must not be
operated without its safety devices; all regulations relevant to safety must be adhered to.
●When part sets are changed (e.g. needle, presser foot, needle plate, feed dog or bob-bin),
during threading, when the workplace is left unattended and during maintenance work,
the machine must be isolated from the power supply by turning off the on/off switch or
removing the plug from the mains!
●Daily maintenance work must only be carried out by appropriately trained persons!
●Repairs and special maintenance work must only be carried out by qualified technical
staff or persons with appropriate training!
●During maintenance or repairs on the pneumatic system the machine must be isolated
from the compressed air supply! The only exception to this is when adjustments or
function checks are carried out by appropriately trained technical staff!
●Work on the electrical equipment must only be carried out by technical staff who are
qualified to do so!
●Work on parts or equipment connected to the power supply is not permitted! The only
exceptions to this are specified in regulations EN 50110.
●Conversion or modification of the machine must only be carried out under observation of
all relevant safety regulations!
1 - 2
Safety
●Only spare parts which have been approved by us are to be used for repairs! We draw
special attention to the fact that spare parts and accessories not supplied by us have not
been subjected to testing nor approval by us. Fitting and/or use of any such parts may
cause negative changes to the design characteristics of the machine. We shall not ac-
cept any liability for damage caused by the use of non-original parts.
1.03 1.03 Safety symbols
Danger!
Special points to observe.
Danger of injury to operating or technical staff!
Danger: Laser beam!
Caution
Do not operate without finger guard and safety devices.
Before threading, changing bobbin and needle, cleaning
etc. switch off main switch.
1.04 Important notes for the user
●This instruction manual belongs to the equipment of the machine and must be available
to the operating staff at all times.
This instruction manual must be read before the machine is operated for the first time.
●Both operating and technical staff must be instructed on the safety devices of the mach-
ine and on safe working methods.
●It is the duty of the user to operate the machine in perfect running order only.
●The user must ensure that none of the safety devices are removed nor put out of work-
ing order.
●The user must ensure that only authorized persons operate and work on the machine.
For further information please refer to your PFAFF agency.
I
1 - 3
Safety
1.05 Notes for operating and technical staff
1.05.01 Operating staff
Operating staff are the persons responsible for setting up, operating and cleaning the mach-
ine and for removing any disturbances in the sewing area.
The operating staff are obliged to observe the following points, and must:
●always observe the notes on safety in this instruction manual!
●avoid using any working methods which adversely effect the safety of the machine!
●avoid wearing loose-fitting clothing or jewelry such as necklaces or rings!
●also ensure that only authorized persons are allowed near the danger area of the
machine!
●immediately report to the user any changes to the machine that may affect its safety!
1.05.02 Technical staff
Technical staff are persons who have been trained in electrical engineering, electronics,
pneumatics and mechanical engineering. They are responsible for lubricating, servicing,
repairing and adjusting the machine.
The technical staff are obliged to observe the following points, and must:
●always observe the notes on safety in this instruction manual!
●switch off the on/off switch before carrying out adjustment and repair work and ensure it
cannot be switched on again unintentionally!
●never work on parts or equipment still connected to the power supply! Exceptions to this
are only permissible according to regulations EN 50110;
●isolate the machine from the compressed air supply when carrying out maintenance or
repair work on pneumatic equipment!
Exceptions to this are only permissible for function checks;
●replace all safety covers after carrying out maintenance or repair work!
1 - 4
Safety
1.06 Danger warnings
A working area of 1 m must be kept free both in front of and behind the mach-
ine, so that easy access is possible at all times.
Never put your hands in the sewing area during sewing!
Danger of injury by the needle!
Do not leave any objects on the table during adjustment work!
Objects can be caught in the machine or flung out!
Danger of injury!
1 - 5
Safety
Do not operate the machine without take-up lever guard 1!
Danger of injury due to movement of the take-up lever!
Do not operate the machine without covers 2and 3!
Danger of injury from running drive belts!
Do not switch on the machine when cover plate 4is retracted!
Danger of injury in hook area!
During operation do not place hands in the swing area of stacker 5!
Danger of injury from the moving arms of the stacker.
During operation do not look into the positioning device 6!
Danger of injury from laser beams!
Fig. 1 - 01
2
3
5
4
6
1
Register 02
Contents .......................................................................................... Chapter
2Proper use ................................................................................................................ 2 - 1
3Specifications ........................................................................................................... 3 - 1
4Disposal of the machine .......................................................................................... 4 - 1
5Transport, packaging and storage .......................................................................... 5 - 1
5.01 Transport to the customer’s premises ....................................................................... 5 - 1
5.02 Transport within the customer’s premises ................................................................ 5 - 1
5.03 Disposal of the packaging .......................................................................................... 5 - 1
5.04 Storage ......................................................................................................................5- 1
6Explanation of the symbols ..................................................................................... 6 - 1
Table of contents
Other Pfaff Sewing Machine manuals
Pfaff
Pfaff 571 Guide
Pfaff
Pfaff hobbylock 4760 User manual
Pfaff
Pfaff 5483 Series User manual
Pfaff
Pfaff 481 A User manual
Pfaff
Pfaff 1163 User manual
Pfaff
Pfaff performance 5.0 User manual
Pfaff
Pfaff 3811-3/55 User manual
Pfaff
Pfaff 1591 User manual
Pfaff
Pfaff Sewing Machine User manual
Pfaff
Pfaff 1245 User manual
Pfaff
Pfaff 1245 User manual
Pfaff
Pfaff powerLine 2595 Manual
Pfaff
Pfaff 9 User manual
Pfaff
Pfaff CREATIVE 4.0 - User manual
Pfaff
Pfaff Embroidery Machines User manual
Pfaff
Pfaff 3566-2/02 User manual
Pfaff
Pfaff tiptronic 6232 User manual
Pfaff
Pfaff 1243-712/02 Guide
Pfaff
Pfaff 422 User manual
Pfaff
Pfaff 1295 User manual
