Perle IDS-105F User manual

Table of contents

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

P/N 5500338-10 (Rev H)

Perle IDS-105F (XT)

Unmanaged 10/100

Ethernet Switches

Installation Guide

- 2 - 105F Installation Guide

Overview

This document contains instructions necessary for the

installation and operation of the Perle IDS-105F Ethernet

switch. This Ethernet switch can be ordered as a 5-port RJ-45

switch or with 4 RJ-45 ports and one SC or ST fiber port. The

fiber port can be either single mode (SM) or multimode (MM)

depending on the model selected and they can operate over

different wavelengths and distances. Visit the Perle website for

the most up to date installation guides, models and

specifications.

http://www.perle.com/

Note: xxxxxxx indicates models numbers for this product line.

TP = twisted pair

XT – Extended temperature models

Features

•10/100Base-TX with one SC/ST fiber port, multi/single mode

•IEEE 802.3/802.3u/802.3x

•10/100, Full/Half duplex, MDI/MDIX with auto-sensing

•Auto-negotiation on copper ports

•Redundant DC power inputs

•Rugged high-strength case

•Industrial temperature models

•Din-rail or wall/panel mounting

Note – In this guide the various models will be referred to as the IDS-

105F

Model

Port 1 - 4

Port 5

IDS-105F TP (RJ-45) TP (RJ-45)

IDS-105F-xxxxxxx TP (RJ-45) Fiber port

IDS-105F-XT

(Industrial Temperature) TP (RJ-45) TP (RJ-45)

IDS-105F-xxxxxxx-XT

(Industrial Temperature) TP (RJ-45) Fiber port

105F Installation Guide - 3 -

Getting to know your IDS-105F Switch

Package Contents:

•IDS-105F

•DIN-rail mounting clip (pre-installed on the unit)

•This guide

Note – Optional panel/wall mounting kits may be ordered

Front View of IDS-105F

(5 port RJ-45)

- 4 - 105F Installation Guide

Front View of IDS-105F (

with one fiber port)

Top view of the IDS-105F

105F Installation Guide - 5 -

Power

The IDS-105F switch has two power inputs that can be

connected simultaneously to DC or AC power sources. If one

power source fails, the other acts as a backup, and

automatically powers the switch.

Reset Button

To reset the IDS-105F insert a paper clip into the air hole vent

and gently press the reset button. The LEDs on the IDS-105F

will go On and then momentarily Off when released to show

that the unit has been reset. All links will be dropped and the

MAC tables will be cleared.

LED Status

P1 / P2– Power (Green LED)

•On: Power present

•Off: No Power present

Fiber Port 5 (Green LED)

•On: Link up

•Flashing: Link up and Ethernet activity detected

•Off: Link down

- 6 - 105F Installation Guide

Ethernet Port Status

Port Link / Speed (Green and Yellow LEDs)

•On: Link Up

•100 Mbps Green on

•10 Mbps Green off

•Flashing: Link up and Ethernet activity detected

•Off : Link down

105F Installation Guide - 7 -

Dimensions for the IDS-105F

- 8 - 105F Installation Guide

105F Installation Guide - 9 -

Mounting the IDS-105F on a DIN-rail

1. The DIN-rail clip will be fixed to the back panel of the IDS-

105F switch when you receive the product.

2. Position the IDS-105F such that the top of the DIN-rail fits into

the slot on the top of the DIN-rail clip, just below the hook and

behind the spring.

3. While pushing down on the unit to compress the spring, rotate

the bottom of the IDS-105F toward the rail. This will snap the

bottom of the rail into the bottom of the clip. See diagram

below

Note: To remove the IDS-105F from the DIN-rail, push down slightly

on the IDS-105F unit while pulling the bottom out.

Wall Mounting the IDS-105F

1. Remove the DIN-rail clip from the rear panel on the IDS-105F.

2. Attach the wall mount plates to the IDS-105F as shown below

using the screws provided in the kit.

- 10 - 105F Installation Guide

3. Use the wall mount plates as a guide to mark the spots where

the screws will be.

4. Drive the screws into the wall leaving about 2 mm of the screw

protruding from the wall to allow room for sliding the wall

mount panel between the wall and the screws.

5. Once the screws are fixed to the wall, insert the four screw

heads through the large part of the keyhole shaped screw

openings.

6. Pull the IDS-105F down to lock the IDS-105F to the wall

mount.

7. Tighten the four screws securely to the wall.

Note: For the best results use screws that have the following attributes:

Head diameter .5 - .6 mm

Shaft diameter 3 - 3.5 mm

Wall/Panel Mounting

Note: the dimensions are in mm