Perko 0927000CHR User manual
Cat. No. 0927000CHR Mortise Lock Set
MOUNTING INSTRUCTIONS
This mortise lock set is designed to be mounted on doors 1 inch to 1-3/8 inches thick. Beveled bolt is reversible.
1). Cut out templates below.
2). Tape template 1 on edge of door at desired height. Fold over edge.
3). Tape template 2 on side of door. Line up center lines. Mark cut-outs for mortised lock, faceplate and holes.
4). Cut out door and drill holes as indicated.
5). Insert lock and fasten.
6). Fasten escutcheons as shown. Insert lever handle with stem. Screw knob on stem and tighten set screw.
7). Mount strike on door frame.
NOTE: FOR CONTINUED EASE OF OPERATION, PERIODICALLY APPLY A LOCK CYLINDER LUBRICANT
PERKO, Inc.
3/04 16490 N.W. 13th Avenue
0927INS1 Miami, FL 33169-5707
www.perko.com
(SEE OVER)
25.4 mm
34.9 mm
14.3 mm
22.2 mm
35 mm
maatvoering van de inbouw is 70 mm x 50.8 mm
ALL MOUNTING CREW
ARE #6 IZE
NOT UPPLIED
Item Catalog Number
Complete Lock et 0927000CHR
Knob, “L” Handle
And haft Assy 0962000CHR
Escutcheon Plate
for “L” Handle ide 092700088A
Escutcheon Plate
For Knob ide with Keyset 092700099B
Lockset Body Assy Only 092700088B
“T” Handle with Cotter Pin
Bevel with Cam ( trike) 0920000CHR
trike Plate Only (Not hown) 0913000CHR
EXPLODED VIEW
CAT. NO. 0927000CHR LOCK ET
Other Perko Lock manuals
