Perko Power R102 User manual
R102
IMPORTANT NOTICE - FOR FIRE DOOR INSTALLATIONS
REFER TO ITEM 1 IN FITTING INSTRUCTIONS
PLEASE READ FITTING INSTRUCTIONS THOROUGHLY
BEFORE INSTALLATION
• SUITABLE FOR USE WITH 4” WIDE HINGES TO GIVE MAXIMUM OPENING
•
•
• Should NOT
•
•
•
•
•
•
CHECK ALL COMPONENT PARTS AGAINST PARTS LIST.
TOOLS REQUIRED
PARTS LIST
Door Closer - x 1
Fixing Plates
Template - x 1 Allen Keys - x 2
Screws - x 12 Extractor Bolt - x 1
•
•
• Wood Chisel 1” x 7” blade
• Solid Centre Auger Bit or Spade Bits
• Awl
• Power Drill
• Tape Measure
• Pencil
• Adjustable Spanner
• Ruler
The use of a dedicated
morticing tool is highly
recommended for multiple
installations
Order code R98.XX which
includes everything you need.
Eye protectors,
Ear Defenders and a
during installation of
Allen
Key for
Adjuster Screw
IMPORTANT NOTICE
DOOR CLOSER POSITIONING
DOOR CLOSERS FITTED
TO A FIRE DOOR
• Perkopower, conforms to
Grade 3 of ANSI/BHMA A156-4
when the power latching action is
set to maximum.
• Turn adjuster screw fully to
positive (+) as explained in 9.
•
of a hinge.
• Closer and plates should be
bedded in Alfacryl FR Intumescent
Acrylic Mastic available from
Samuel Heath.
• For ADA requirements turn power
latching adjuster screw towards
negative until opening forces are
achieved.
• Ensure door is plumb, hinges are
•
• Secure template to door edge and
frame edge within 12” of a hinge
ensuring the center line is central in
• Draw a vertical line at the centre point
NB
from template centre line.
See Fig. 2
•
• The maximum distance between
these 2 vertical lines must not exceed
• At each point on the template where
the vertical lines cross the horizontal
using an awl into the door edge and
Remove template RETAIN FOR
REFERENCE
NOTE: Door can now be removed from
To achieve a maximum opening angle of 105° the center of the closer
IMPORTANT
FRAME PREPARATION FOR
FRAME PLATE
DOOR PREPARATION FOR
BODY & DOOR PLATE
NB To ensure correct operation of
the closed position.
•
accept frame plate assembly as indicated
on template
•
between plates when fitted.
• Remove excess timber between drilled
•
frame plate assembly as indicated on
template
•
between plates when fitted.
• Remove excess timber between drilled
holes to accept the closer body and door
INSTALLING CLOSER
•
•
•
•
Both allen keys must be correctly
located
•
• Secure door plate to door with six screws
IMPORTANT
With composite doors and door linings
(2.5mm) to suit fixing screws.
ADJUSTMENT -
CLOSING SPEED
• With the closer secure and now held
• Open door slightly and remove allen
•
•
•
•
Leopold Street
Birmingham
B12 0UJ, England
US Customer Service
ADJUSTMENT -
POWER LATCHING ACTION
• The power latching action can be
•
•
•
CANADA
HONG KONG
JAPAN
SINGAPORE
TAIWAN
USA
UK
AUSTRIA
BELGIUM
DENMARK
FRANCE
GERMANY
IRELAND
ITALY
LUXEMBOURG
NETHERLANDS
SPAIN
SWEDEN
SWITZERLAND
LIECHTENSTEIN
82862
EP1605126
156554
6625847
2004/0111831
2365822
2436363
GB25447175
GB2415014
EP1605126
Table of contents
Other Perko Power Door Opening System manuals
Popular Door Opening System manuals by other brands
Normstahl
Normstahl IDO7 installation manual
Häfele
Häfele Finetta T 70 VF manual
AGS
AGS D-PL Instructions for fitting, operating and maintenance
Stanley
Stanley MA900ñ Installation and owner's manual
WITTUR
WITTUR Hydra Plus UD300 Instruction handbook
Alutech
Alutech TR-3019-230E-ICU Assembly and operation manual