SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
WARNING. READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS PRODUCT. FAILURE TO DO SO MAY
RESULT IN FIRE, ELECTRICAL SHOCK, PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
DANGER: Do not use product near gas, combustible or explosive materials.
1. Always use common sense and pay particular
attention to all the DANGER, WARNING,
CAUTION and NOTICE statements of this
manual. The safety instructions provided are
not intended to cover all possible conditions
and practices that may occur when operating,
maintaining and cleaning power tools.
2. Observe work area conditions. Do not use ma-
chines or power tools in damp or wet locations.
Don’t expose to rain or snow. Keep work area
well lighted. Do not use electrically powered
tools in the presence of ammable gases or
liquids. Do not bring combustible materials near
the tools. Power tools create sparks, which
may ignite the dust or fumes. Do not immerse
tool in liquids. Keep work area clean, well
ventilated and well lit. Cluttered work areas
invite accidents.
3. Use personal protective equipment. Wear ANSI
approved safety goggles. Protective equipment
such as dusk mask, non-skid safety shoes,
hard hat, heavy duty work gloves or hearing
protection used for appropriate conditions will
reduce personal injuries.
4. Keep bystanders, children and visitors away
while operating this product. Distractions can
cause you to lose control.
5. Stay alert. Watch what you are doing, and
use common sense when operating this tool.
Do not use this product while tired or under
the inuence of drugs, alcohol, or medication.
A moment of inattention while operating this
product may result in serious personal injury.
Keep proper footing and balance at all times.
Do not reach over or across running machines,
hoses, cords, etc.
6.
This product is not intended for use as a power
source. Do not exceed electrical rating of this product.
7. Work Safe. Operate tool a safe distance from
yourself and others in the work area. Keep
proper footing and balance at all times. Do not
overreach, especially on ladders. Be certain
ladders being used are sturdy, stable, on a rm
surface and erected as safe working angles.
Do not reach over or across running machines,
hoses, cords, etc.
8. Inspect tool before every use; do not use if
parts are loose or damaged.
9. Do not alter, splice, repair or modify this
product in any way.
10. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets
will reduce risk of electric shock.
11. People with pacemakers should consult their
physician(s) before use. Electromagnetic
elds in close proximity to heart pacemaker
could cause pacemaker interference or
pacemaker failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid
electrical shock.
• Any power cord must be properly grounded.
Ground Fault Circuit Interrupter (GFCI) should
also be implemented – it prevents sustained
electrical shock.
WARNING: Read and understand this entire instruction manual before attempting to
assemble, install, operate or maintain this product. Failure to comply with the instructions
may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed
when using this product:
This instruction manual is intended for your benefit. Please read and follow the safety, installation,
maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents
of this instruction manual are based upon the latest product information available at the time of publication.
The manufacturer reserves the right to make product changes at any time without notice.
DANGER Indicates an imminently hazardous
situation that, if not avoided, WILL result in death
or serious injury.
WARNING Indicates a potentially hazardous
situation that, if not avoided, COULD result in
death or serious injury.
CAUTION Indicates a potentially hazardous
situation that, if not avoided, MAY result in minor
or moderate injury.
NOTICE Indicates important information, which
if not followed, MAY cause damage to equipment.
After opening the carton, unpack your new product and related parts & accessories.
Please inspect it carefully for any damage that may have occurred during transit. Please
check it against the photograph on carton. If any parts are missing, please call customer
service at 1-800-426-1262 between 6 a.m. and 5 p.m. Pacific time.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Do not
operate the product until the parts have been replaced or the fault rectified. Failure to do so may result in
serious personal injury or property damage. All damaged parts must be repaired or replaced as needed
prior to operating this product. Check to see that all nuts, bolts and fittings are secure before putting this
product into service. If you have any questions, or require assistance with damaged or missing parts,
please contact our factory customer service department at: 1-800-426-1262.
Please have the serial number, model number, and date of purchase available for reference when calling.
Specifications are
subject to change
without notice.
Light source:...
13W 10,000-hour CFL bulb
Power Supply:...........................120V AC
Cord:.................6 foot, 18GA, grounded
