Pentair Nocchi Omnia 80/5 User manual

OMNIA

IT - ISTRUZIONI ORIGINALI IN LINGUA ITALIANA

33PAG.FIN

69PAG.RUS

49PAG.PL

1PAG.

57PAG.H

29PAG.DK

9PAG.

61PAG.CZ

13PAG.

45PAG.GR

17PAG.

37PAG.N

53PAG.RO

64PAG.TR

F5PAG.EN 25PAG.NL

41PAG.S

IT 21PAG.P

SUMMARY

CHAPTER DESCRIPTION PAGE

1FEATURES 1

2USE AND LIMITATIONS 2

3 INSTALLATION 2

4ELECTRIC CONNECTION 3

5MAINTENANCE AND TROUBLE SHOOTING 4

- WARRANTY 79

Improper use may lead into electric shock.

Improper use may cause damage to pump or installation.

DANGER - ELECTRIC SHOCK RISK

WARNING

Improper use may lead into heavy risk for persons and things.

DANGER

SAFETY SYMBOLS

Notice for safety.

Please give particular care to following signs.

Before installing the pump please carefully read this manual. Guarantee will not be activated in case of improper use.

The pumps of the OMNIA® series are particularly suitable to sump rain water, drain water and waste water.

They are used to de-water flooded rooms, to irrigate gardens and backyards, to transfer clear or muddy water, with pumps

operating totally or partially immersed. Each pump is tested and packed very attentively.

Please ensure pump has not been damaged during transport; if this occurs please phone the dealer, within 8 days from

purchasing day.

ATTENTION

FEATURES

CHaPter 1

INSTALLATION

CHaPter 3

• Please use handlebar to remove or

lift pump up

• Please use a non-return valve in

case pump is connected to fixed

installation with rigid piping; this will

avoid liquid circulating when pump

has been turned off; use of a pipe

fitting will allow easy disconnection of

pump for maintenance

• Dimensions of drain well must allow

max. 30 on/off cycles/hour (See USE

• Max. Temp.Of liquid: 50° C continuous

duty

• Max. Immersion height:

7 m with 10 mt. of power cord

• Max. Free passage (80/5; 160/7;

200/8): 20 mm

• MAX.ON/OFFCYCLES/HOUR:

30 equally spaced

Pump cannot be used to move inflammable or dangerous liquids.

Ensure pump never runs dry.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use

of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play

with the appliance.

DAMGER

When installing, please ensure pump is disconnected from electric current network.

DANGER - ELECTRIC SHOCK RISK

Pump with less than 10 mt. supply cord cannot be used in open spaces.

The min. priming level refers to completely submerged outlet (See Pict. 1).

USE AND HIS LIMITATIONS

CHaPter 2

AND HIS LIMITATIONS)

• Please use flexible pipe connected

to pump by means of plastic fitting in

case of temporary use of pump

• Use a rope to immerse pump and

fasten it to pump's handlebar

• OMNIA® aut is equipped with a pre-

rated float switch (See Pict. 1); please

increase or decrease the free piece

of float switch cable by making it

sliding through the proper seat on the

handlebar, when modifying the rating

of float switch

• Pumps used besides or inside

swimming pools, garden ponds or

similar places may have special

requirements

Make sure that float switch turns off pump, when at min. level of liquid.

Make sure no obstacles stand in the way of float switch, during up/down swinging.

WARNING

TYPE MIN. PRIMING

LEVEL MIN. DRAINAGE

LEVEL START LEVEL STOP LEVEL WEIGHT

PICTURE A B C D -

OMNIA® 80/5 80 mm 35 mm 250 mm 100 mm 5,7 Kg

OMNIA® 160/7 96 mm 35 mm 320 mm 107 mm 6,5 Kg

OMNIA® 200/8 96 mm 35 mm 351 mm 111 mm 7 Kg

ELECTRIC CONNECTION

CHaPter 4

The supply cord is equipped with double ground contact, plug so grounding is done when plugging in.

OMNIA® range pumps have a built-in thermal overload with automatic reset.

Further protections are not required.

Ensure tension and frequency of pump (read motor plate) and supply network are same.

WARNING

Installer must make sure that electric current network has ground wire conforming to current laws.

Make sure that electric current network is provided with a high-sensitivity circuit-breaker

∆=30 mA (DIN VDE 0100T739).

DANGER - ELECTRIC SHOCK RISK

OVERLOAD PROTECTION

CONNECTIONS DIAGRAM (See diagrams Pict.2) :

1. START (green)

2. RUN (red)

3. COMMON (black)

4. CAPACITOR

A. Single phase manual pump

5. SUPPLY CORD

6. GROMMET

7. PLUG

8. YELLOW-GREEN

B. Single phase automatic pump

9. WHITE

10. LIGHT BLUE <LINE>

11. BROWN <LINE>

12. FLOAT SWITCH

No maintenance is required when OMNIA® range pumps operate in normal conditions.

Occasionally maintenance of liquid ends and replacement of impeller may be required.

MAINTENANCE AND TROUBLE SHOOTING

CHaPter 5

Before doing any operation, make sure pump is disconnected from electric current network.

Power cord must be replaced by manufacturer or by Customer service, using special tools.

DANGER - ELECTRIC SHOCK RISK

FAULT POSSIBLE CAUSE REMEDY

PUMP DOES NOT DELIVER, MOTOR DOES NOT RUN

1) No electric current supplying. -

2) Incorrect plugging in . Verify presence of electric current supply and plug in.

3) Circuit-breaker come into operation. Reinforce circuit-breaker. Please call electrician in case circuit-brea-

ker comes again into operation.

4) Impeller blocked. Remove obstacle.

5) Motor or capacitor damaged. Call dealer.

PUMP DOES NOT DELIVER, MOTOR RUNS 1) Filter obstructed. Clean filter.

2) Non return valve blocked. Clean or replace valve.

PUMP DELIVERS REDUCED WATER

1) Filter partially obstructed . Clean filter.

2) Delivery pipe partially obstructed. Remove obstacles.

3) Impeller worn off. Replace impeller.

INTERMITTENT WORKING

1) Solids obstruct impeller. Remove obstacles.

2) Too warm liquid. -

3) Motor broken. Call dealer.

This manual suits for next models

Table of contents

Other Pentair Water Pump manuals

Pentair

Pentair PGA Series User manual

Pentair

Pentair BERKELEY HL Series User manual

Pentair

Pentair ONGA VF150 User manual

Pentair

Pentair Hypro 9303 Series User guide

Pentair

Pentair Hydromatic S4L Manual

Pentair

Pentair Myers DRY PIT 4VCDP Manual

Pentair

Pentair Jung Pumpen BASICLOGO BD 610 EC User manual

Pentair

Pentair Myers WG20 Manual

Pentair

Pentair Hydromatic HE Series Manual

Pentair

Pentair Fairbanks Nijhuis 6300-1 User manual

Pentair

Pentair JUNG PUMPEN K2 plus User manual

Pentair

Pentair Sta-Rite WATERPRESS INOX Series User manual

Pentair

Pentair Myers WG30 Manual

Pentair

Pentair Edwards 400 User manual

Pentair

Pentair NOCCHI FCD20 PVM 5-5 F User manual

Pentair

Pentair STA-RITE DS3 Series User manual

Pentair

Pentair AURORA 411 Operating instructions

Pentair

Pentair HYDROMATIC FG-100A-1 User manual

Pentair

Pentair US User manual

Pentair

Pentair Flotec OMNIA Series User manual

Pentair

Pentair ME7 Series Guide

Pentair

Pentair STA-RITE C Series User manual

Pentair

Pentair VERSAILLES Series User manual

Pentair

Pentair Berkeley SS1XN-1/2 User manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual