You can ConfigureEthernet connections for static IP, or DHCP etc,
To uncheck option to Turn Off Ethernet automatic connection
The internet connection will use Ethernet when Wi-Fi is Turn On.
WLAN connection
Wi-Fi can only be used when it connects with home Wi-Fi Access Point (AP) or a free unsecured Wi-Fi
hotpot. Under “Wireless & networks”, tap “Wi-Fi” to turn it on. After a moment, your Wi-Fi network
list should populate. If you need to rescan for available networks, tap "scan"
•Turn on WLAN
Tap “Settings”→ then “Wireless & networks”→“Wi-Fi”to turn on Wi-Fi.Your Peloton Tread
Tablet lists the networks it finds within range. Tap a network to connect. If necessary, enter Network
SSID, Security, and Wireless password, and tap “Connect”. When your Peloton Tread Tablet is
connected to the network, the wireless indicator appears in the status bar. Waves indicate connection
strength.
BT connection
•Make device discoverable:
You must pair your Peloton Tread Tablet with a device before you can connect to it. Once you pair your
Peloton Tread Tablet with a device, they stay paired unless you unpair them.Under “Settings”, choose
“Bluetooth”. Tap Bluetooth to turn on it and tap “Search for devices”. The Bluetooth indicator then
appears in thestatus bar.
•Scan for devices
After scanning, there will be a list of the IDs of all available Bluetooth devices in range. If the device
you want to pair with isn’t in the list, ensure that the other device is turned on and set to be
discoverable.
•Pair with the Bluetooth device
Tap the name of an available Bluetooth device to pair with. In the popup“Bluetooth pairing request”
dialog, type a PIN.If the pairing is successful, your Peloton Tread Tablet connects to the device.
You can touch the right icon to unpair the device.
•Note: After pairing, it shows under the Bluetooth device “Paired but not connected”, but file
transmission is still possible.
