Pelican MD3200M User manual
eDVR Installation Guide
MD3200M
(v 1.0)
Caution
Since this device is operation purpose and registered as suitable electromagnetic waves, seller or user
should be cautios on this point. If the device is sold or purchased wrongly, it is required to replace as
Home use.
FCC Compliance Statement
Caution : Any changes or modifications in construction of this device which are not expressly approved
the party responsible for compliance could void the user's authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications,
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures
Warning
1. In case of changing built-in lithum battery, it should be replaced as same or kindred one to prevent a
danger of explosion. Since old batteries could be a factor of environment contamination, be cautios to
treat them.
2. Do not throw the batteries to fire or heating. Neither short circuiut or disassembly is prohibited.
3. Do not charge the batteries provided with Remote Controller
Important Notice
1. Do not place heavy objects on the top of the eDVR
2. eDVR is for indoor use. It is not weatherproof. Use eDVR with referring to its environmental
specifications (Temperature & Humidity). To clean the eDVR, gently wipe the outside with a clean dry
cloth.
3. eDVR use AC power of 110V~240V. Be cautions not to cause electric damages to eDVR.
4. Becareful not to drop the eDVR. Physical shocks may harm the products including internal HDD. In
addition, be sure the eDVR is secured after installation.
5. eDVR is made of metal. Therefore you can hurt human beings if you throw it to them or hit on them.
When eDVR is installed, be cautious to locate on safe places where children are unreachable.
6. If eDVR does not operate properly, please contact the closest WEBGATE distributor for after sales
service. Tempering or disassembling the product will void warranty.
7. Security surveillance laws may differ for each country. Therefore, please contact the local region first
to avoid any surveillance law violations.
The contents of this manual can be modified in accordance with Firmware or Software upgrade. In the
interest of continually improving products, approval & outlook can be modified without prior notice
4
Contents
OVERVIEW .................................................................................................................................. 7
1. What is MD3200M?.............................................................................................................. 7
2. Supplied accessories.............................................................................................................. 8
3. Description & Function ......................................................................................................... 9
INSTALLATION AND CONNECTION ....................................................................................... 11
4. Connecting & Running ........................................................................................................ 11
4.1. Connecting camera ...................................................................................................... 11
4.2. Connecting monitor ..................................................................................................... 11
4.3. Connecting Audio ........................................................................................................ 12
4.4. Supplying power.......................................................................................................... 13
5. Running OSD menu ............................................................................................................ 14
5.1. Using menu ................................................................................................................. 14
5.2. Dialogue box to edit a word .......................................................................................... 15
6. Setting remote controller...................................................................................................... 16
6.1. Setting ID of MD3200M .............................................................................................. 16
6.2. Selecting MD3200M.................................................................................................... 17
6.3. Operable range of remote controller .............................................................................. 17
6.4. Loading the batteries into remote controller ................................................................... 17
7. MD3200M configuration ..................................................................................................... 18
7.1. Basic configuration ...................................................................................................... 18
7.2. Advanced configuration ............................................................................................... 18
7.3. External storage & Back up configuration ...................................................................... 19
7.4. Internet/ Intranet configuration...................................................................................... 19
8. eDVR MD3200M basic setting ............................................................................................ 20
8.1. Viewing Image ............................................................................................................ 20
8.2. Setting Date & Time .................................................................................................... 21
8.2.1. Time Zone ........................................................................................................... 21
8.2.2. Daylight Saving.................................................................................................... 21
8.2.3. Sync with NTP ..................................................................................................... 21
8.2.4. Time Format ........................................................................................................ 22
8.2.5. Date..................................................................................................................... 22
8.2.6. Time.................................................................................................................... 22
5
8.2.7. Apply Date/Time .................................................................................................. 22
8.3. Setting recording condition ........................................................................................... 23
8.3.1. Configuration Status ............................................................................................. 23
8.3.2. Recording Speed/Quality....................................................................................... 24
8.3.3. Speed(ips)............................................................................................................ 24
8.3.4. Quality ................................................................................................................ 24
8.3.5. Audio Recording .................................................................................................. 24
8.3.6. Alarm Recording .................................................................................................. 24
8.3.7. Apply .................................................................................................................. 24
9. Connecting and configuring DIO ports.................................................................................. 25
9.1. Connecting and configuring sensor................................................................................ 25
9.1.1. Specification ........................................................................................................ 25
9.1.2. Connecting sensor input ........................................................................................ 26
9.1.3. Configuring sensor at OSD menu........................................................................... 27
9.2. Connecting & configuring relay out............................................................................... 28
9.2.1. Specifications....................................................................................................... 28
9.2.2. Connecting relay out ............................................................................................. 29
9.2.3. Configuring relay out as OSD menu. ...................................................................... 30
9.3. Connecting serial port .................................................................................................. 31
9.3.1. Configuring serial ports for Pan/Tilt/Zoom.............................................................. 31
9.3.2. Diagram of serial ports.......................................................................................... 32
9.3.3. Configuring Serial ................................................................................................ 33
9.4. Connecting external device with serial port .................................................................... 34
9.4.1. Connecting text inout device (ATM / POS / Access Control) .................................... 34
9.4.2. Configuring serial setup (COM1) at OSD menu ...................................................... 35
9.4.3. Configuring text ................................................................................................... 36
9.5. Connecting USB device................................................................................................ 37
9.6. Connecting video in/output .............................................Error! Bookmark not defined.
10. Connecting External Storage ............................................................................................ 38
10.1. IEEE1394 port ......................................................................................................... 38
10.2. Connecting IEEE1394 Device ................................................................................... 38
10.3. Available HDD ........................................................................................................ 39
10.4. Registering & Formating HDD.................................................................................. 39
11. Network monitoring & managing...................................................................................... 40
11.1. Connecting Ethernet ................................................................................................. 40
11.2. Configuring Network infomraiton of MD3200M ........................................................ 41
6
12. Using Control Center Lite ................................................................................................ 42
12.1. Starting.................................................................................................................... 42
12.1.1. PC system requirements for running Control Center Lite.......................................... 42
12.2. Installing Control Center Lite .................................................................................... 42
12.3. Log-In..................................................................................................................... 43
12.4. Configuration Tool ................................................................................................... 44
12.5. Monitor ................................................................................................................... 44
12.6. Playback.................................................................................................................. 45
APPENDIX .................................................................................................................................. 46
#1. HDD .............................................................................................................................. 47
#1.1. Fundamental notions & terms.................................................................................... 47
#1.2. Installing HDD......................................................................................................... 50
#2. Using CD-ROM .............................................................................................................. 58
#3. How to recognize manufacturing date ............................................................................... 59
#4. Specification ................................................................................................................... 60
7
OVERVIEW
1. What is MD3200M?
The eDVR MD3200M is a 16-analog channels network digital video recorder. Video, Audio, Text and
Event-Logs are digitized and stored on two internal Hard-Drives
□ 32 analog video channels
□4 channel two-way audio recording & playback
□ Max. 480ips1at 4CIF recording
□ Real-time (60fps2for each channel) monitoring
□Built-in software multiplexer for all live monitoring channels (1/4/9/16/ch Mode on CCTV Monitor)
□ Maximum 8TB storage capacity (IEEE 1394 for external HDD)
□ ATM/POS transaction information text recording and search with corresponding video
□ 16 sensor inputs and 4 relay outputs
□ Built-in hardware motion detection with search function (22x18 or 22x15)
□Various efficient back-up methods (
□ PTZ control via RS 232 and RS485
□ User friendly Color Graphic OSD
□ Static IP (DHCP, Dynamic IP) support for xDSL, Cable-Modem user
□ IR Remote Controller (User controls PTZ with remote controller)
□ Remote Management Software (Control Center Lite-D)
□ Dual CCTV Monitor (1 Normal, 1 Spot) support
□ Improvement in Video quality (Clearer Image, Night Noise filtering) function
□ Digital Water Mark function
<Note>
Extension through NVS04, IEEE 1394b will be supported later.
For the details, please contact to local distributor.
1ips = image per second
2fps = field per second
8
2. Supplied accessories
Unpack and check all the items as below;
1. eDVR MD3200M (1EA) 2. AC Power Cord (1EA)
3. CD (Including Software) (1EA) 4. Remote Controller (1EA)
5. RACK FIXING KIT (1SET) 6. R-HDD screw (8EA)
<Note>
Attention for the system without HDD installed
In case of system without HDD, HDD only can only be installed in R-HDD(Removable Hard disk
rack).
For the internal installation of HDD additionally, For the details, please contact to local distributor.
9
3. Description & Function
MD3200M front
(1) Power switch
(2) Function buttons
(3) LED
(4) USB port
(5) Remote controller receiver
(6) CD/DVD-RW ROM
(7),(8) Built-in Hard Disk Rack
10
MD3200M rear
(9) AC power connector
(10) BNC connector for video input
(11) Terminal block for sensor, relay, and serial input/output
(12) RS232 connector
(13) VGA connector
(14) IEEE1394 connector
(15) eSATA connector
(16) Network Storage connector(RJ45)
(17) GND
(18) Ethernet connector
(19) Audio input/ output connector
(20) BNC connector for monitor output
Table of contents
