Spare Parts List
Part No. Description
1213GEC A5000GEC Without Disc and Bracket
1217 Mounting Bracket
1136 Magnetic Disc 4”/ 16 Magnets
1378 Magnetic Disc 8”/ 32 Magnets
1705 Magnetic Disc 8"/ 48 Magnets
LIMITED WARRANTY
Process Control Systems, Inc. will repair or replace, at their option, F.O.B. factory,
any part or unit which proves to be defective in material or workmanship within five
years of purchase date, provided that part of the unit was installed and operated as
recommended, to be established by examination of the part or unit at the factory.
Goods returned under warranty must be shipped prepaid to the factory and
accompanied by the serial number, description of defect, order number and date of
purchase.
This warranty shall not apply to any Maxigard™ product which shall have been
repaired or altered outside of the Process Control Systems factory or has been
subject to misuse, negligence or accident.
Process Control Systems, Inc. warrants its products, but not their application, and
shall not be liable for any incidental or consequential damages incurred through the
use or loss of use of a Process Control Systems product. No representatives or
other person is authorized or permitted to make any warranty or assume for this
company any liability not strictly in accordance with this guarantee.
There is no further warranty either expressed or implied beyond that set forth
herein.
Page 8
Bulletin No: A5000GEC
Release Date: May 2017
