1
Remove back cover of terminal
Connect the S300 POS connector cable
Replace back cover of terminal
Connect power cable to S300 connector cable
(terminal is turned on/off via power connection)
Connect Ethernet cable to red LAN port on S300 POS connector cable
Connect other end of Ethernet cable to router
To begin configuration, exit ECR mode by pressing red cancel button
Enter admin password. Terminal will now be in Admin mode
To return to ECR mode press yellow arrow button
If you have not already, turn on terminal and change the
default password (000000)
from 000000 (see Change Password instructions)
Press UP scroll arrow to access ADMIN MENU
Press 3 for SET-UP
Press 2 for HOST SET-UP
Enter new ADMIN PASSWORD, press OK
Enter the 8 digit TERMINAL ID (TID), press OK
Default communication is ETHERNET
SELECT INPUT TYPE should be set to IP
IP ADDRESS should set at 206.152.27.137
NAME should be set at ww.ctpaiement.com
PORT NUMBER should be set at: 5085
Press UP arrow to access ADMIN MENU
Press 3 for SET-UP
Press 3 for SYSTEM SETUP
Enter Admin Password, press OK
TERMINAL DATE will be set automatically by host
TERMINAL TIME will be set automatically by host
Main Communication mode default setting ETHERNET
Set ETHERNET SETUP to dynamic or static using up/down buttons
If ETHERNET SETUP is set to DYNAMIC IP
PORT FOR ECR should be set to 9999, press OK
If ETHERNET SETUP is set to STATIC IP:
Enter TERMINAL IP ADDRESS, press OK
Enter MASK IP, press OK
Enter GATEWAY IP ADDRESS, press OK
PORT FOR ECR should be set to 9999, press OK
Power button to turn terminal ON/OFF
The PAX S300 menu functions are arranged
in two menus: Transaction and
Administration
Scroll buttons are used to scroll through to
display menu options
To access letters on the numeric keypad,
press the key quickly until the desired letter
appears
Press 0 (zero) twice for space
Press Up button for [*]
Press Down button twice for [•]
Use yellow CORR button to go back one step
Press UP arrow to access the ADMIN MENU
Use scroll arrows to reach 9 or Press 9 for
PASSWORD
Press 2 for ADMIN PASSWORD
Enter default ADMIN PASSWORD 000000,
press OK
Enter new Admin password
Confirm new Admin password
Cables Required:
For LAN connection:
S300 POS connector cable
S300 Power Cord
Ethernet Cable
For serial connection:
S80 Download cable
DB 9 USB to serial convertor
PAX S300 Reference Guide
Integrated Mode
