Patton electronics IPROCKETLINK 3101 User manual

ipRocketLink™ Model 3101 Series

ADSL2/2+ Router

Quick Start Guide

Important

—This is a Class B device and is intended for use in a light industrial (commercial) or resi-

dential environment. It is not intended for use in a heavy industrial environment.

Part Number: 07M3101-QS, Rev. B

Revised: September 23, 2011

Sales Office: +1 (301) 975-1000

Technical Support: +1 (301) 975-1007

E-mail: support@patton.com

WWW: www.patton.com

2Model 3101 Series Quick Start Guide

• Do not open the device when the power cord is connected. For sys-

tems without a power switch and without an external power

adapter, line voltages are present within the device when the power

cord is connected.

• For devices with an external power adapter, the power adapter shall

be a listed Limited Power Source The mains outlet that is utilized to

power the device shall be within 10 feet (3 meters) of the device,

shall be easily accessible, and protected by a circuit breaker in compli-

ance with local regulatory requirements.

• For AC powered devices, ensure that the power cable used meets all

applicable standards for the country in which it is to be installed.

• For AC powered devices which have 3 conductor power plugs (L1, L2

& GND or Hot, Neutral & Safety/Protective Ground), the wall outlet

(or socket) must have an earth ground.

• For DC powered devices, ensure that the interconnecting cables are

rated for proper voltage, current, anticipated temperature, flammabil-

ity, and mechanical serviceability.

• WAN, LAN & PSTN ports (connections) may have hazardous voltages

present regardless of whether the device is powered ON or OFF.

PSTN relates to interfaces such as telephone lines, FXS, FXO, DSL,

xDSL, T1, E1, ISDN, Voice, etc. These are known as “hazardous net-

work voltages” and to avoid electric shock use caution when working

near these ports. When disconnecting cables for these ports, detach

the far end connection first.

• Do not work on the device or connect or disconnect cables during peri-

ods of lightning activity.

This device contains no user serviceable parts. This device can only be

repaired by qualified service personnel.

This device is NOT intended nor approved for connection to the PSTN. It

is intended only for connection to customer premise equipment.

In accordance with the requirements of council directive 2002/96/EC on Waste of

Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate

this product from other waste and scrap and deliver to the WEEE collection system in

your country for recycling.

WARNING

Model 3101 Series Quick Start Guide 3

1.0 Power up the router

1.1 Connect the AC adaptor

1. Connect the barrel-type connector of the AC adaptor to the Power connector on the ipRocketLink router.

2. Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC).

1.2 Power up the 3101

1. Depress the On/Off switch on the rear panel of the 3101 if it is not already on.

2. The Power LED will glow when the unit is on. Wait 10 seconds before attempting to access the unit.

2.0 Configure the IP address

The ipRocketLink is shipped with a factory-configured IP address assigned to the Ethernet/LAN port. The address

is 192.168.1.1/24. The next section describes how to change the default LAN IP address.

2.1 Connect a PC and log in

1. Set your computer for DHCP.

2. Using an Ethernet cable, connect the PC’s Ethernet port to a LAN or Ethernet port on the 3101. The LAN/

Ethernet port is auto-MDIX (see figure 1).

Electrostatic Discharge (ESD) can damage equipment and impair electrical

circuitry. It occurs when electronic printed circuit cards are improperly

handled and can result in complete or intermittent failures. Do the follow-

ing to prevent ESD:

• Always follow ESD prevention procedures when removing and replac-

ing cards.

• Wear an ESD-preventive wrist strap, ensuring that it makes good

skin contact. Connect the clip to an unpainted surface of the chassis

frame to safely channel unwanted ESD voltages to ground.

• To properly guard against ESD damage and shocks, the wrist strap

and cord must operate effectively. If no wrist strap is available,

ground yourself by touching the metal part of the chassis.

CAUTION

4Model 3101 Series Quick Start Guide

Figure 1. Connecting the ipRocketLink to the PC’s serial port

2.2 Log in via web browser

1. Launch a Web browser on your computer.

2. Browse to “http://192.168.1.1” (the 3101’s default IP address).The login page displays.

3. Enter a username and password. The default superuser username and password are both admin. The

default operator/common username and password are both user. It is recommended to change these

default values after logging into the 3101 for the first time.

4. Click OK to login, or click Cancel to exit the login interface.

5. Click Advanced Setup > WAN to configure, modify, and remove WAN interfaces. Contact your ISP for

WAN configuration requirements.

Connect to LAN

or Ethernet port

Ethernet port

Line Eth 1 Eth 2 Eth 3 Eth 4 Power

Reset

Model 3101 Series Quick Start Guide 5

3.0 Connect the ADSL port

1. Obtain a single-twisted-pair cable with an RJ-11 plug connector at each end.

2. Plug one end of the cable into the RJ-11socket labeled Line on the ipRocketLink Router.

3. Plug the other end of the cable into the RJ-11 wall socket that provides your DSL service.

4. When a DSL link is established, the front panel Line LED will turn on.

4.0 Additional Information

Refer to the Model 3101 Series Getting Started Guide located on the CD that shipped with the 3101 or online

at www.patton.com/manuals for detailed information about:

•

Installing, configuring, operating, and troubleshooting,

•

Warranty, trademark, & compliance

A.0 Customer and Technical Support

Toll-Free VoIP support: call sip:suppo[email protected] with a VoIP SIP phone

Online support: www.patton.com

E-mail support: s[email protected]—answered within 1 business day

Telephone support:

•

Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to

2200 UTC/GMT)

•

Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800

UTC/GMT)

Fax: +1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerland)

6Model 3101 Series Quick Start Guide

B.0 Compliance Information

B.1 Compliance

EMC:

•

EN55022, Class A

•

EN55024

Safety:

•

IEC/EN60950-1, 2nd Edition

PSTN:

•

IEC/EN60950-1, 2nd Edition

B.2 CE Declaration of Conformity

Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other rele-

vant provisions of Directive 2004/108/EC relating to electromagnetic compatibility and Directive 2006/95/EC

relating to electrical equipment designed for use within certain voltage limits. The Declaration of Conformity

may be obtained from Patton Electronics, Inc at www.patton.com/certifications.

The safety advice in the documentation accompanying this device shall be obeyed. The conformity to the above

directive is indicated by CE mark on the device.

B.3 Authorized European Representative

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon,

Oxon OX14 1UD, UK

Model 3101 Series Quick Start Guide 7

The information in this document is subject to change without notice. Patton Electronics assumes no

liability for errors that may appear in this document.

Trademarks statement

The term ipRocketLink is a trademark of Patton Electronics Company. All other trademarks presented in this doc-

ument are the property of their respective owners.

Warranty, Trademark, & Compliance Information

For warranty, trademark and compliance information, refer to the Model 3101 Series Getting Started Guide

located on the CD-ROM that came with your router or available online at www.patton.com.

8Model 3101 Series Quick Start Guide

NOTES

____________________________________________________________________

This manual suits for next models

Table of contents

Other Patton electronics Network Router manuals

Patton electronics

Patton electronics SMARTNODE 4552 User manual

Patton electronics

Patton electronics OnSite 1052 Series User manual

Patton electronics

Patton electronics 3224 Diamond Edge User manual

Patton electronics

Patton electronics SMARTNODE 4552 User manual

Patton electronics

Patton electronics IM1/I4 User manual

Patton electronics

Patton electronics Patton SmartNode 2300 Series User manual

Patton electronics

Patton electronics 3060/V24 User manual

Patton electronics

Patton electronics 3040/V35 User manual

Patton electronics

Patton electronics SMARTNODE 4900 User manual

Patton electronics

Patton electronics SmartNode 4520 Series User manual

Patton electronics

Patton electronics OnSite 2884 User manual

Patton electronics

Patton electronics IPLink 2821 User manual

Patton electronics

Patton electronics SL4020 User manual

Patton electronics

Patton electronics 4520 User manual

Patton electronics

Patton electronics SmartNode 4960 Series User manual

Patton electronics

Patton electronics 4520 User manual

Patton electronics

Patton electronics 3210 User manual

Patton electronics

Patton electronics SMARTNODE 4630 Series User manual

Patton electronics

Patton electronics SMART NODE 4950-NCE User manual

Patton electronics

Patton electronics SMARTNODE 5400 User manual

Patton electronics

Patton electronics 2124 User manual

Patton electronics

Patton electronics OnSite 2800 Series User manual

Patton electronics

Patton electronics Patton IPLink 2603 User manual

Patton electronics

Patton electronics IM2RC/IA User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview