Parsun F4ETS User manual

ELECTRIC OUTBOARD MOTOR

OPERATOR’S MANUAL

Model Numbers

F4ETS, F4ETL, F4ERS, F4ERL

SUZHOU PARSUN POWER MACHINE CO., LTD.

Thank you for purchasing a PARSUN outboard motor.

Your trust in our company and products is greatly appreciated

 “PARSUN” outboard motors are powerful, economic, safe, and manufactured

with advanced technology.

Please read this manual carefully before operating your outboard motor. A

through understanding of the manual will help you to safely operate the product, and

perform the required maintenance and care. By following the information contained

within this manual, you will ensure that your outboard motor operates for many years

 “PARSUN” seeks continuous improvement in product quality. Therefore,

while this manual contains the most current product information available at the time

of printing, there may be minor discrepancies between your machine and this manual.

If there is any question concerning the manual, please consult your local PARSUN

dealer.

 Data, illustrations, or explanations in this Operators Manual do not constitute

base for any legal claim against our company.

SUZHOU PARSUN POWER MACHINE CO., LTD

Outboard Identification Numbers

Outboard motor serial number

The outboard motor serial number is marked on the label. The label can be found on the left bracket

assembly or on the upper part of the bracket swivel.

Record your outboard motor serial number in the spaces provided to assist you in ordering spare

parts from your Parsun dealer or for reference in case your outboard motor is stolen.

1. Outboard motor serial number location.

Serial number as follows:

Manufacturer’s Declaration

This outboard motor complies with the requirements of Directive 2003/44/EC in relation to the noise

emissions. The following installation and maintenance instructions, if applied, guarantee that the

outboard motor will remain in compliance with the noise emissions limits under normal conditions of

use.

Tableofcontents Page

Main Components and General Information……………………..……..……………….…1

General Information and Specifications…………………………………………………….2

Propeller Selection….…………………………………………………….…………………..3

Installation and Operation..…….………………………………….…………..……………..3

Mounting Height Recommendations…….………………………………………………….5

Clamping the Outboard Motor……………….………………………………………………6

Pre-Operation Checks………………………………………………………………….…….8

Starting the Outboard (Tiller Model)………………………….………………….………… 9

Changing Direction for Tiller Model………………………..…………….….……………..11

Stopping the Outboard (Tiller Model…………………………………………….…….......12

Throttle Friction Adjuster………………………………………………….………..............13

Starting the Outboard (Remote Control Model)……………………………....................14

Changing Direction for the Remote Control Model……..…………..……….………......15

Stopping the Remote Controlled Outboard..……………………………….……….…...16

Trimming the Outboard Motor…………………………………………………………......17

Tilting Up and Down (Warnings)……………………………………………………..…....18

Tilting Up………………………………………………………………….………………….19

Tilting Down………………..………………………………………………….…….……….20

Cruising in Shallow Water/Salt Water………………..……………………………………21

Maintenance Procedures………………..………...………..……………………………...22

Greasing ………………..…………………….…………………………………….............23

Checking the Propeller………………..…………………………………………….…......24

Removing/Installing the Propeller………………..………………………………….........25

Changing the Gear Oil………….………………..……………………………………….. 26

Checking and Replacing the Anode…………………………………………......…..…...28

Checking the Top Cover……………………………………….…….…………..….......... 29

Maintenance Table……………………………………..……………………….….…….....29

Transporting and Storing……………………………………..……………………….……32

Emergency Situations………..……………………….….……........................................34

Treatment of Submerged Outboard………………………..……………………….….….34

Low Battery Warning Buzzer……………………………………………………………….34

Main Components and General Information 1

1. Top cover

2. Top cover lock handle

3. Steering friction screw

4. Anti-cavitation plate

5. Propeller

6. Cooling water inlet

7. Trim Rod

8. Clamp Bracket

9. Tiller handle

10. Stop button, Lanyard switch

11. Control switches

12. Throttle friction adjuster

13. Throttle grip

14. Carry handle

15. Clamp screw

16. Rope attachment

17. Tilt support bar

18. Remote control cable

19. Power Cable connector

GeneralInformationand 2

Specifications

Parameter

Items Data Items Data

Type of outboard Electric Input Power 4.8 KW Maximum

Rated voltage 48 VDC Maximum Continuous

output

3.0 Kw/4500Rpm

(4HP)

Rated Current 100 Amps Full throttle motor speed 4000～5000Rpm

Operating Voltage 30-60 VDC Gear ratio 2.08（27/13）

Overall length 717mm Recommended gear oil Hypoid gear oil SAE﹟90

Overall width 361mm Gear oil quantity 100 mm3

Overall height (S) 1029mm ETL:30.4kg,ETS:29.4kg

Overall height (L) 1156mm Net Weight ERL:29.4kg,ERS:28.4kg

Propeller Selection

The performance of your outboard motor will be critically affected by your choice of propeller, as

an incorrect choice could adversely affect performance. The outboard motor is fitted with propeller

chosen to perform well over a range of applications, but there may be uses where a propeller with a

different pitch would be more appropriate. “PARSUN” dealers stock a range of propellers and can

advise you and install a propeller on your outboard that is best suited to your application.

For a greater boat load and a low engine speed, a smaller-pitch propeller is more suitable.

Conversely, a large-pitch propeller is more suitable for a smaller operating load as it enables the

correct engine speed to be maintained.

Operation and

Installation

Mount the outboard motor on the center line (keel line) of the boat. For boats without a keel or

which are asymmetrical, consult your dealer.

1.Center line (keel line)

NOTE:

During water testing, check the buoyancy of the boat when at rest with its maximum load.

Check that the static water level on the exhaust housing is low enough to prevent water entry

into the power head, or when water rises due to waves, or when the outboard is not running.

WARNING:

 Overpowering a boat could cause severe instability. Do not install an outboard motor

with more horsepower than the maximum rating on the capacity plate of the boat. If the

boat does not have a capacity plate, consult the boat manufacturer.

 Improper mounting of the outboard motor could result in dangerous conditions and injury.

For permanently mounted models, your dealer or other person experienced in proper

rigging should mount the motor. If you are mounting the motor yourself, you should be

trained by an experienced person. For portable models, your dealer or other person

experienced in proper outboard motor mounting should show you how to mount your

motor.

 The information presented in this section is intended as reference only. Proper mounting

depends in part on experience and the specific boat and motor combination.

Mounting Height

0～25mm

(0-1in)

The mounting height of the outboard motor greatly affects your boat running efficiency. If the

mounting height is too high, cavitation tends to occur, thus reducing the propulsion. If the mounting

height is too low, the water resistance will increase and thereby reduce engine efficiency. Mount the

outboard motor so that the anti-cavitation plate is between the bottom of the boat and a level 25mm

below it.

NOTE:

The optimum mounting height of the outboard motor is affected by the boat and motor

combination and the desired use. Test runs at a different height can help determine the

optimum mounting height. For further information, consult your “PARSUN” dealer or boat

manufacturer.

This manual suits for next models

Table of contents

Popular Outboard Motor manuals by other brands

Yamaha

Yamaha VF150 owner's manual

Sleipner

Sleipner SEP-IP30 installation guide

Suzuki

Suzuki DF 40 Service manual

SELVA MARINE

SELVA MARINE Corse owner's manual

TOHATSU

TOHATSU BFT 250A owner's manual

KONRAD

KONRAD Series 600B Maintenance manual

Mercury

Mercury 8 Bigfoot 4-Stroke Installation operation maintenance warranty manual

Sleipner

Sleipner E-Vision Electric Thruster E300 installation guide

Suzuki

Suzuki DF40A manual

IST

IST 18.BF200D manual

Side-Power

Side-Power SP 155 TC i Installation and user manual

Mercury

Mercury 40 FourStroke Operation and maintenance manual

Quick

Quick BTR250 user manual

Yamaha

Yamaha VF90 owner's manual

Yamaha

Yamaha D150H owner's manual

Yanmar

Yanmar ZT350 series Operation manual

MotorGuide

MotorGuide X3-40 Operation and maintenance manual

Mercury

Mercury 30 - 60 HP installation manual