Parrot ANAFI USA User manual

ANAFI USA

General Checks

Preflight Checks

Inflight Checks

Battery Information

Super Quick Start Guide

ANAFI USA x Skycontroller

USA

Flight Checks:

BY DRONIVO GMBH

MCPKG01417A

Dronivo GmbH

Giulinistraße 2;

Gebäude S07;

67065 Ludwigshafen

Germany

Bitte Bild ändern,

das ist keine Parrot

Anafi USA

General Checks:

1. Gimbal protection - Remove

2. Arms - Deploy

3. Arms - Check general condition and absence

of cracks

4. Propeller blades - Check general condition

and absence of cracks

5. Propeller blades - check tightening

6. Gimbal - Check if it is free on both axes

7. Camera lenses - Cleanse

8. SD Card - Check presence

9. Vertical camera and ultrasonar -

Check/cleanse

10. Battery - Insert

11. Drone - Power on

12. Remote control - Power on

13. Stylus - Check/cleanse

14. Wi-Fi link - Check

15. Battery levels (drone and remote control) -

Check full charge

16. SD Card - Format/Encrypt

17. Magnetometer - Calibrate

18. Main camera streaming - Check

19. Zoom camera streaming - Check

20. IR camera streaming - Check then back to

Visible

21. Gimbal stabilization - Check

22. Hand launch - Activate/deactivate as

required by mission

23. Map - Charge

24. Security settings - Check

25. Flight Preset - Check

26. LED Settings - Check

27. Network settings - Select Manual / set a 5

Hz channel / revert to Auto

28. Take-off - Proceed

29. Flight stability - Check

30. Joystick and triggers control - Check

31. Landing - Proceed

32. Drone - Power off

33. Remote control - Power off

Preflight Checks:

1. Remove control - Power on

2. Arms - Deploy

3. Drone battery level - Check

4. Drone - Power on

5. Propeller blades - Check

6. Gimbal stabilization - Check

7. Wi-Fi link - Check

8. Obstacles in flight zone - Check

9. Line of sight - Estimate

10. Take-off - Proceed

11. Streaming - Check

12. RTH* settings - Check/modify

as required by mission

13. GPS - Check

14. Auto recording - Check/modify

as required by mission

Inflight Checks:

Battery Information

When a battery is not plugged to a power

source, its 4 lEDs indicate its charge level

after a short press on the power button:

1 flashing LED: 0-20%

1 1 LED: 21-40%

2 LEDs: 41-60%

3 LEDs: 61-80%

4 LEDs: 81 -100%

NOTE 1: ANAFI USA batteries can be

charged with any USB-C cable.

NOTE 2: ANAFI USA batteries

hibernate after 10 days without use. In

hibernation mode, batteries discharge

to 65% charge, their LEDs do not turn

on, and they cannot power the drone.

Thanks to hibernation mode, batteries

last longer without losing their power.

To get a battery out of the hibernation

mode, plig it to a power source.

Signal strength1.

GPS2.

Height3.

Drone battery level4.

Remote control battery level5.

Video recording6.

Obstacles7.

Line of sight8.

RTH* path9.

*RTH - Return to Home: by default, the drone flies back to its Home point (take-off point or 1st GPS fix), but the function is fully customazible through FreeFlight 6.

*LED - Light Emitting Diode

When a battery is plugged to a power

source, its 4 LEDs* indicate its charge

level:

1 LED - 0-24%

2 LED - 25-49%

3 LED - 50-74%

4 LED - 75-100%

Sieht mehr nach einer Anafi Thermal aus

GPS fehlt

Other manuals for ANAFI USA

Other Parrot Drone manuals

Popular Drone manuals by other brands

Ryze

Ryze Tello quick start guide

PowerVision

PowerVision PowerRay user manual

Force1

Force1 rogue F72 user manual

Zerotech

Zerotech DOBBY user manual

Protocol

Protocol VIDEODRONE AP instruction manual

dji

dji Matrice M210 quick start guide

MAKE

MAKE Terry Kilby Getting started

SYMA

SYMA X440 user manual

RUKO

RUKO F11 user manual

SYMA

SYMA X5UW(720P) user manual

Dynali

Dynali 25 H maintenance

dji

dji PHANTOM 4 user manual

Atlas

Atlas AtlasPRO user manual

Twodots

Twodots TVVIN BOARD quick guide

GDU

GDU SAGA user manual

Ares

Ares ETHOS QX 130 instruction manual

Walkera

Walkera ZHUN quick start guide

dji

dji WIND-4 user manual