PARLEE ALTUM DISC User manual
Electronic Drivetrain
Cabling Guide
R1.0
1
Congratulations on the purchase of your new PARLEE Altum!
The Altum is our most advanced model to date, delivering race ready performance with our
signature PARLEE ride.
This manual contains important assembly and service information. All assembly and service
of PARLEE bicycles must be carried out by an authorized PARLEE Dealer/Mechanic.
Note to PARLEE Dealers/Mechanics: We strongly advise that you read this manual in
its entirety before assembly of the bicycle to familiarize yourself with the systems and
proprietary procedures of its assembly.
If you have any questions contact PARLEE at:
Phone: 978.998.4880
Email: Info@parleecycles.com
Table Of Contents
2
03 - Seat Post Installation
08 - Frame Set Assembly
11 - Brake Cable Housing Installation
18 - Head Tube Assembly
20 - Electronic Housing Installation
26 - Final Cable Routing Overview
27 - Frame Armor Installation
Altum Clamp Follower
x1
Seat Post Clamp Nut
x1
M5 Wedge Clamp Bolt
x1
Altum Clamp Top
x1
Seat Post Assembly
3
Seat Post Clamp
Red Loctite All Threaded Surfaces.
Torque to 5-8nm
4
1
Foam Padding
Ta p e
Battery
Battery Electronic Wire
Insert battery electronic wire
into seattube and guide
towards the bottom bracket.
5
2
Battery
Foam Padding
Ta p e
Battery Electronic Wire
6
3
Apply Carbon Paste
Seat Post
7
4
Lower Bearing
x1
Upper Bearing
x1
Bearing Seal
x1
Bearing Ring
x1
Top Cap 15mm
x1
Frame Set Assembly
8
Blind Grommet
x1
Teflon Tubing
x1
For Mechanical Front Drive - train
For Mechanical Drive - train
Foam Silencer Tubing
x1
Rubber Seal
x1
Steel Spacer
x2
Electronic BB Hatch
For Electronic Drive - train
Brake Housing Stop
x1
9
This manual suits for next models
1
Other PARLEE Bicycle manuals
