Parkside PDBNP 14 A1 User manual
PNEUMATIC BLIND RIVET GUN PDBNP 14 A1
PNEUMATIC BLIND RIVET GUN
Translation of the original instructions
IAN 285821
DRUCKLUFT-BLINDNIETPISTOLE
Originalbetriebsanleitung
GB/IE/NI Translation of the original instructions Page 1
DE/AT/CH Originalbetriebsanleitung Seite 25
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
A
B
PDBNP 14 A1 GB│IE│NI │ 1 ■
Contents
Introduction...........2
Intended use..............2
Operating components (Fig. A)3
Accessories (Fig. B) ........3
Package contents ..........4
Technical data ............4
General safety instructions
for compressed air tools 5
Hazards caused by flying parts6
Hazards during operation . . . 6
Hazards caused by dust and
vapours..................7
Risks due to repetitive movements8
Hazards caused by accessories8
Hazards in the workplace . . . 8
Risks due to noise .......... 9
Risks due to vibrations ...... 9
Additional safety instructions
for pneumatic machines ....10
Before use ...........11
Lubrication ..............11
Topping up the oil ........12
Connecting to a compressed
air source ...............12
Use .................13
Maintenance and
cleaning .............15
Changing the gripper jaws. . 16
Troubleshooting ......19
Disposal.............19
Kompernass Handels
GmbH warranty ......20
Service .................22
Importer................22
Translation of the original
Conformity Declaration23
PDBNP 14 A1
■ 2 │ GB│IE│NI
PNEUMATIC BLIND RIVET GUN
PDBNP 14 A1
Introduction
Congratulations on the purchase of your new appliance. You have
chosen a high-quality product. The operating instructions are part of
this product. They contain important information about safety, usage
and disposal. Before using the product, please familiarise yourself
with all operating and safety instructions. Use the product only as de-
scribed and for the range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
The pneumatic pop rivet gun is used to combine suitable materials
with a rivet joint. Any other usage or modification of the appliance is
deemed to be improper and carries a significant risk of accidents. The
manufacturer accepts no responsibility for damage(s) resulting from
improper usage. This appliance is intended for domestic use only.
Symbols on the compressed air tool:
WARNING! Read the operating instructions before
use.
Wear a dust mask.
Always wear eye protection when using
or maintaining the rivet gun.
Always wear hearing protection.
Oil regularly.
PDBNP 14 A1 GB│IE│NI │ 3 ■
Operating components (Fig. A)
(For illustrations see fold-out pages)
Mouthpiece (4.8 mm preassembled)
Front connector
Hexagonal socket on the front connector
Trigger
Lubricant opening
Compressed air supply cover
Compressed air supply 1/4”
Handle
Thread for the pin collector
Accessories (Fig. B)
Assembly spanner 10|15|24mm
Assembly spanner 14|19mm
4×20rivets (2.4–3.2–4.0–4.8mm)
Oil container
3spare mouthpieces (2.4–3.2–4.0mm)
Connecting nipple
1m sealing tape
Pin collectors with mounting ring
2×replacement gripper jaws
PDBNP 14 A1
■ 4 │ GB│IE│NI
Package contents
1 pneumatic blind rivet gun
4mouthpieces (2.4–3.2–4.0–4.8mm)
2assembly spanners |
1connecting nipple
1m sealing tape
20rivets each (2.4–3.2–4.0–4.8mm)
1 oil container
1 pin collector
2 gripper jaws
1 carrying case
1 set of operating instructions
Technical data
Working pressure: max. 6.3 bar
Air consumption: 127 l/min (average)
Stroke length: 14 mm
Traction: min. 7,050N
Compressed-air supply: 1/4”
Noise emission value:
Noise measurement determined in accordance with ISO 15744.
The rated noise level of the tool is typically:
Sound pressure level: LpA = 76.1 dB (A)
Uncertainty: KpA = 3 dB
Sound power level: LWA = 87.1 dB (A)
Uncertainty: KWA = 3 dB
PDBNP 14 A1 GB│IE│NI │ 5 ■
Wear hearing protection!
Total vibration value:
Vibration values determined in accordance with ISO 28927-6 and
EN 12096:
Vibration emission value ah≤ 0.85 m/s2
Uncertainty Kh= 0.59 m/s2
NOTE
► The noise emission levels and vibration values specified in these
instructions have been measured in accordance with the corre-
sponding standardised measuring procedure and can be used
to make equipment comparisons. The noise emission levels and
vibration values vary depending on the use of the compressed
air tool and may be higher than the values specified in these
instructions in some cases. It is easy to underestimate the noise
emission levels and vibration values if the compressed air tool is
used regularly in this manner.
WARNING! General safety instructions for
compressed air tools
WARNING!
► For multiple hazards: Please ensure that you have read and
understood the safety instructions before adjusting, operating,
repairing, maintaining or replacing any accessories on the rivet
gun and before working in the vicinity of the machine. Failure to
do this can result in serious bodily injury.
PDBNP 14 A1
■ 6 │ GB│IE│NI
■ The rivet gun should only be adjusted, set or used by adequately
qualified and trained operators.
■ This rivet gun may not be modified. Modifications can reduce the
effectiveness of the safety measures and increase the risks for the
operator.
■ The safety instructions should not be lost – give them to the operator.
■ Never use a damaged rivet gun.
■ The appliance must be inspected regularly to ensure that it is
labelled with the required rated values and markings given in this
manual. The user must contact the manufacturer to obtain replace-
ment labels if necessary.
Hazards caused by flying parts
■ If a workpiece or accessory breaks, parts can be flung out at high
speeds.
■ Always wear impact-resistant eye protection when operating the
rivet gun or exchanging accessories on the appliance. The degree
of necessary protection must be evaluated separately for each
individual task.
■ Wear a safety helmet if working above head height. In this case,
the risks for others should also be assessed.
Hazards during operation
■ When using the machine, the operator’s hands can be subject to
hazards such as cuts, grazing and heat. Wear suitable gloves to
protect your hands.
■ The operator and maintenance personnel must be physically capa-
ble of handling the size, mass and power of the machine.
■ Hold the machine correctly: be ready to counteract any normal or
sudden movements - have both hands ready.
■ Ensure that your body is balanced and that you have a secure
standing position.
PDBNP 14 A1 GB│IE│NI │ 7 ■
■ Use only lubricants recommended by the manufacturer.
■ Suitable safety goggles must be worn; wearing of protective gloves
and safety clothing is recommended.
■ Never use the machine without a rivet.
■ Only operate the machine if the additional machine tool is properly
attached to the machine with a suitable locking mechanism.
■ There is a risk of electrostatic discharge if the machine is used on
plastic and other non-conductive materials.
Hazards caused by dust and vapours
■ The dust and vapours produced by using the rivet gun can be
hazardous to health (e.g. cause cancer, birth defects, asthma
and/or dermatitis); it is essential to carry out a risk assessment in
respect of these risks and to implement corresponding regulatory
mechanisms.
■ The risk assessment should include all dust caused by the use of the
machine and any existing dust that may be whirled up at the same time.
■ The rivet gun is to be operated and maintained in accordance with
the recommendations contained in this manual to keep the release
of dust and vapours to a minimum.
■ The exhaust air should be routed so that the raising of dust in
already dusty environments is kept to a minimum.
■ If dusts or vapours are created, the main priority must be to control
these at the site of their release.
■ All inserts or accessories of the machine intended for collecting, ex-
tracting or suppressing airborne dust or vapours or should be used
and serviced in accordance with the manufacturer’s instructions.
■ Consumables/machine tools should be selected, maintained and
replaced in accordance with the recommendations in this guide in or-
der to avoid unnecessary intensification of dust or vapour production.
Table of contents
Languages:
Other Parkside Rivet Tools manuals
Popular Rivet Tools manuals by other brands
Silver Eagle
Silver Eagle SE314 operating instructions
Würth
Würth HES 510 N Translation of the original operating instructions
Stanley
Stanley EZM1000 Instruction and service manual
Stanley
Stanley PROSET PB3400 Accessories manual
HS-Technik
HS-Technik NutBee NBLS-21 operating instructions
Gesipa
Gesipa PowerBird Pro Gold Edition Operating manual with spare parts list