Parkside 73787 User manual
SANDBLASTER GUN PDSP 1000 A1
SANDBLASTER GUN
Operation and Safety Notes
Translation of original operation manual
PAINEILMAKÄYTTÖINEN
HIEKKAPUHALLUSPISTOOLI
Käyttö- ja turvaohjeet
Alkuperäisen käyttöohjeen käännös
BLÄSTRINGSPISTOL, TRYCKLUFT
Bruksanvisning och säkerhetsanvisningar
Översättning av bruksanvisning i original
DRUCKLUFT-SANDSTRAHLPISTOLE
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung
IAN 73787
GB/IE Operation and Safety Notes Page 5
FI Käyttö- ja turvaohjeet Sivu 17
SE Bruksanvisning och säkerhetsanvisningar Sidan 29
DE/AT / CH Bedienungs- und Sicherheitshinweise Seite 41
Before reading, unfold the page containing the illustrations and familiarise yourself with all
functions of the device.
Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin toimintoihin.
Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant
med apparatens/maskinens funktioner.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.
DRUCKLUFT-SANDSTRAHLPISTOLE
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung
15
34
C
A EB
1.
2.
2
5GB/IE
Introduction
Proper use................................................................................ Page 7
Features and equipment......................................................... Page 8
Included items ......................................................................... Page 8
Technical data......................................................................... Page 8
Safety advice................................................................... Page 9
Operation
Connecting the compressed air source ................................. Page 11
Filling the blast medium container.......................................... Page 11
Using the sandblasting gun.................................................... Page 12
Cleaning ............................................................................... Page 12
Service................................................................................... Page 13
Warranty............................................................................. Page 13
Disposal................................................................................ Page 14
Declaration of Conformity/
Manufacturer................................................................... Page 15
Table of contents
6 GB/IE
Introduction
The following pictograms are used in these operating
instructions/on the device:
Read instruction manual!
Observe caution and safety notes!
Risk of explosion!
Wear hearing protection, dust protection mask
and protective glasses.
Keep children away from the device!
Never point the device at people or animals.
No smoking!
Dispose packaging and appliance in an
environmentally-friendly way!
7GB/IE
Introduction
Sandblaster gun PDSP 1000 A1
Q
Introduction
We congratulate you on the purchase of your new device.
You have chosen a high quality product. The instructions for
use are part of the product. They contain important information
concerning safety, use and disposal. Before using the product, please
familiarise yourself with all of the safety information and instructions for
use. Only use the unit as described and for the specified applications.
If you pass the product on to anyone else, please ensure that you also
pass on all the documentation with it.
Q
Proper use
This device is intended for the removal of rust and paint from metal
surfaces. Any other use or modification to the device shall be considered
as improper use and could give rise to considerable risk of accident.
We will not accept liability for loss or damage arising from improper
use. The device is intended for private, domestic use only.
Q
Features and equipment
1Sandblaster gun
2Trigger
3Plug-in nipple for compressed air connection
4Blast medium container
5Blast nozzle
8 GB/IE
Q
Included items
1 Sandblaster gun PDSP 1000 A1
1 Operating instructions
Q
Technical data
Max. Working pressure: 8bar
Recommended working air pressure: 3–5bar
Compressed air consumption: 130–260l / min
Nozzle ø: 2.8mm
Container capacity: 1000ml
Volume flow rate: typically 200–220g/Min.
Required air quality: Cleaned and oil-free
Working settings: Working air pressure setting at
the pressure reducer max. 8 bar.
Sound pressure level: 86dB(A)
Sound power level: 98dB(A)
Values determined in accordance with EN 14462 (EN1953/A1:2009).
Safety advice
Read all the safety advice and instructions.
Even minor failures to observe the safety advice and instructions could
lead to severe injury.
keep all the safety advice and instructions in a safe place
for future reference.
Safety adviceIntroduction/Safety advice
9GB/IE
Check the device for damage before bringing it into
use. Do not use the device if you discover any defects.
Keep children and other people away while
you are operating the sandblasting gun. Dis-
tractions can cause you to lose control of the device.
RISK OF INJURY! IMPROPER USE! Never point
the device at people or animals.
For your own safety, wear suitable personal
protective equipment.
Wear an approved dust mask /
protective hood!
Wear protective glasses!
RISK OF EXPLOSION! Do not use the sandblasting
gun 1in environments containing gases, open flames,
fires or gas-operated water heaters.
NO SMOKING!
Work in adequately ventilated spaces only.
Never use oxygen or other combustible gas as the
energy source.
Never exceed the maximum working air pressure of 8bar.
RECOIL FORCES! High working pressures can
give rise to recoil forces that under certain conditions can result in
danger from continuous loading.
DANGER OF INJURY! Disconnect the device from the com
pressed
air source before carrying out any repairs or maintenance of the
device or moving it to another location.
Safety adviceIntroduction/Safety advice
10 GB/IE
DANGER OF INJURY! Disconnect the device from the com-
pressed air source before filling it with blast medium.
NOTE! Please observe the safety advice provided by the manu-
facturer of the blast medium.
Use only materials for the blast medium that are suit-
able for the sandblasting gun. Do not use quartz sand.
There is the danger of toxic silicon dust forming.
Take precautions to ensure that other people are not
contaminated (dust generation).
Ensure that the spent blast medium is trapped and
collected so that it can be disposed of in an environ-
mentally compatible manner.
Do not remove rating plates or labels–they are safety-relevant
parts of the device.
If you are inexperienced in the use of this type of device, you should
seek out information or training to learn how to handle it safely.
Q
Operation
Q
Connecting the compressed air source
NOTE: Operate the sandblasting gun 1only with cleaned, conden-
sate- and oil-free compressed air and never exceed the maximum
working air pressure at the device of 8 bar.
NOTE: The compressed air source must be fitted with a (filter) / pres-
sure reducer so that the air pressure can be regulated.
Connect the sandblasting gun to a suitable compressed air source
by connecting the quick-release coupling of the air supply hose with
the plug-in nipple 3to the sandblasting gun 1. It locks itself in
place automatically.
OperationSafety advice/Operation
This manual suits for next models
1
Table of contents
Languages:
Other Parkside Power Tools manuals
Parkside
Parkside 354759 2010 User manual
Parkside
Parkside PKGA 20-Li B1 User manual
Parkside
Parkside PES 200 B1 User manual
Parkside
Parkside PAT 4 A1 User manual
Parkside
Parkside PLBS 30 User manual
Parkside
Parkside PDNB 6.3 B2 User manual
Parkside
Parkside PHLG 2000-2 User manual
Parkside
Parkside PAMFW 20-LI A1 User manual
Parkside
Parkside PDSP 1000 B2 Owner's manual
Parkside
Parkside PMFW 280 A1 - 3 User manual
Parkside
Parkside PES 200 B1 User manual
Parkside
Parkside 373198 2104 User manual
Parkside
Parkside PAH 1300 A1 User manual
Parkside
Parkside PDSS A1 User manual
Parkside
Parkside PEH 30 A1 ELECTRIC PLANER User manual
Parkside
Parkside pmfw 310 b1 User manual
Parkside
Parkside PGG 15 E4 User manual
Parkside
Parkside PKGA 20-Li A1 User manual
Parkside
Parkside 373118-2104 User manual
Parkside
Parkside PSG 50 B2 User manual
