Parker D1FB EE Series User manual
Bulletin MSG11-5715-704/UK
Direct Operated
Proportional DC Valve
Operating instructions
Series D1FB*EE
Design series 18
II 2 G c T4 Gb
-20 °C ≤Ta≤+40 °C
D1FB*EEXG371:
-20 °C ≤Ta≤+60 °C
Parker Hannifin
Manufacturing Germany GmbH & Co. KG
Industrial Systems Division Europe
Gutenbergstr. 38
41564 Kaarst, Germany
Tel.: (+49) 181 99 44 43 0
E-mail: valvesisde@parker.com
Copyright © 2018, Parker Hannifin Corp.
2
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
WARNING - USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and
authorized distributors provide product or system options for further investigation by users having
technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection
of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects
of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalog and in any other materials provided from Parker or its
subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or
system options based upon data or specifications provided by the user, the user is responsible for
determining that such data and specifications are suitable and sufficient for all applications and
reasonably foreseeable uses of the components or systems.
3
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
Contents Page
0. EC declaration of conformity 4
1. Introduction 8
Ordering code 9
Technical data 11
Characteristic curves 12
Dimensions 14
Name plate 15
2. Safety instructions 15
Symbols 15
Marking, name plates 15
Work on the valve 15
3. Important information 16
Correct use 16
Common instructions 16
Liability 16
Storage 16
4. Installation 17
Scope of delivery 17
Installation 17
Electrical connection 18
Operation limits 18
Pressure fluids 18
5. Operating instructions 19
Electronic control system 19
Air bleeding of hydraulic system 19
Filter 19
Flushing 19
6. Maintenance 19
Replacement of a coil 19
7. Troubleshooting 21
A1 Extract from standards/directives 21
A2 User guide – Solenoid 23
A3 Type-examination certificate – Solenoid 25
A4 Declaration of conformity - Solenoid 39
A5 Mounting instruction cable gland 40
4
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
0. EC declarations of conformity
5
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
6
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
7
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
8
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
1. Introduction
The D1FB*EE series with explosion proof solenoids
is based on the standard D1FB series.The specific
solenoid design allows the usage in hazardous
environments. The explosion proof class is
Ex e mb IIC T4 Gb
for use in zone 1 and 2 (conform to ATEX).
Additionally the solenoids are IECEx compliant.
The parameters can be saved, changed and dupli-
cated in combination with the digital power amplifier
PWD00A-400 (to be used in an explosion proof
cabinet or outside of the hazardous area).
The valve parameters can be edited with the com-
mon ProPxD software.
The D1FB valves can be ordered with spool/sleeve
design (D1FB*0) for maximum precision as well
as spool/body design (D1FB*3) for high nominal
flow - see functional limit curves for maximum
flow capability.
Features
• Spool/sleeve and spool/body
• High repeatability from valve to valve
• Low hysteresis
• Manual override
• Optional: coil to permit ambient temperature up
to +60 °C modification XG371
a 0 b
A B
PT
AB
D1FB*0*EE
Spool/sleeve design
D1FB*3*EE
Spool/body design
9
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
* Flow rate for different ∆p per control edge: Qx= QNom. · √∆px
∆pNom.
With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.
Technical data
General
Design Direct operated proportional DC valve
Actuation Proportional solenoid
Size NG06/CETOP 03/NFPA D03
Mounting interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPA
Mounting position unrestricted
Ambient temperature [°C] -20...+40; XG371: -20...+60
MTTFDvalue [years] 150
Weight [kg] 3.5 (2 solenoids), 2.5 (1 solenoid)
Hydraulic
Max. operating pressure [bar] Ports P, A, B 350; Port T 210
Max. pressure drop PABT / PBAT [bar] 350
Fluid Hydraulic oil as per DIN 51524...535, other on request
Fluid temperature [°C] -20...+40; XG371: -20...+60
Viscosity
permitted [cSt] /
recommended [cSt] /
[mm2/s]
[mm2/s]
20...400
30...80
Filtration ISO 4406 (1999) ; 18/16/13
Nominal flow at ∆p=5 bar
per control edge *
D1FB*0*EE (Spool/sleeve) D1FB*3*EE (Spool/body)
[l/min] 6 / 12 / 20 10 / 20 / 30
Leakage at 100 bar [ml/min] <50 <60
Overlap [%] 25, electrically normalized at 10 (see flow characteristics)
Static / Dynamic
Step response at 100 % step [ms] 30 30
Hysteresis [%] <4 <6
Temperature drift solenoid current [%/K] <0.02
Electrical characteristics
Duty ratio [%] 100
Protection class , Ex e mb IIC T4 Gb, IP66 (plugged and mounted correctly)
Solenoid J J*XG371 K
Supply voltage [V] 24 24 12
Current consumption [A] 1.15 1.0 2.3
Resistance [Ohm] 12.0 12.0 3.0
Solenoid connection Box with M20x1.5 entry for cableglands. Solenoid identifications per ISO
9461.
Wiring min. [mm²] 3 x 1.5 recommended
Wiring length max. [m] 50 recommended
10
Direct Operated Proportional DC Valve
Series D1FB*EE Explosion Proof
Operating Instructions
Parker Hannifin Corporation
D1FB-EE 5715-704UK 07.01.19
Size
DIN NG06
CETOP 03
NFPA D03
D1FB*0*EE: Spool/sleeve design
Code Spool type
Flow [l/min]
at ∆p 5 bar
per metering edge
E01C
E01F
E01H
6
12
20
E02C
E02F
E02H
6
12
20
E03C
E03F
E03H
6
12
20
B31F
B31H
QB= QA /2 12 / 6
20 / 10
B32F
B32H
QB= QA /2 12 / 6
20 / 10
D1FB*3*EE: Spool/body design
Code Spool type
Flow [l/min]
at ∆p 5 bar
per metering edge
E01F
E01H
E01K
10
20
30
E02F
E02H
E02K
10
20
30
B31F
B31H
B31K
QB= QA /2 10 / 15
20 / 10
30 / 15
B32F
B32H
B32K
QB= QA /2 10 / 15
20 / 10
30 / 15
Code Spool position
C
E
K
Standard
dynamics
standard
repeatability
Directional
control
valve
Proportional
control
Spool Spool position Seals
NBR
(other seal
compounds
on request)
1 F B 0D
Ordering code
N
This manual suits for next models
2
Table of contents
Other Parker Control Unit manuals
Parker
Parker 89-00B Guide
Parker
Parker EBV-PR Series User guide
Parker
Parker D Series User manual
Parker
Parker Origa S9 User manual
Parker
Parker PSUP Series User manual
Parker
Parker Series DFplus User manual
Parker
Parker D31FBxEE Series User manual
Parker
Parker PSSN8M8A Installation and maintenance instructions
Parker
Parker IQAN-LC5-C02 User manual
Parker
Parker CK-1 Guide
Parker
Parker Sporlan SD-114 User guide
Parker
Parker PHD Series User manual
Parker
Parker Hi-Pro Manifold User manual
Parker
Parker 71215 User manual
Parker
Parker Autoclave Engineers 10V Series User manual
Parker
Parker P6 Technical specifications
Parker
Parker 930 Series Guide
Parker
Parker 810 Series Assembly instructions
Parker
Parker TDC Series User manual
Parker
Parker D1VW -SC Series User manual
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
