Paradyne Compshere 3000 Series User manual

COMSPHERE

–48 Vdc CENTRAL OFFICE

POWER UNIT

INSTALLATION GUIDE

Document No. 3000-A2-GB41-50

October 2002

COMSPHERE –48 Vdc Central Office Power Unit

AOctober 2002 3000-A2-GB41-50

COMSPHERE

–48 Vdc Central Office Power Unit

Installation Guide

3000-A2-GB41-50

6th Edition (October 2002)

Changes and enhancements to the product and to the information herein will be documented and issued as a new release.

Warranty, Sales, and Service Information

Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information

concerning warranty, sales, service, repair, installation, documentation, training, distributor locations, or Paradyne worldwide office

locations, use one of the following methods:

•Via the Internet: Visit the Paradyne World Wide Web site at http://www.paradyne.com

•Via Telephone: Call our automated call system to receive current information via fax or to speak with a company representative.

— Within the U.S.A., call 1-800-870-2221

— Outside the U.S.A., call 1-727-530-2340

Trademarks

All products and services mentioned herein are the trademarks, service marks, registered trademarks or registered service marks of their

respective owners.

Thispublicationisprotected by federalcopyright law.No part ofthis publicationmay be copiedor distributed,transmitted, transcribed,stored ina retrievalsystem,

ortranslatedintoanyhumanorcomputerlanguageinanyformorbyanymeans,electronic,mechanical,magnetic,manualorotherwise,ordisclosedtothirdparties

without the express written permission of Paradyne Corporation, 8545 126th Avenue North, P.O. Box 2826, Largo, Florida 33779-2826.

ParadyneCorporationmakesnorepresentationorwarrantieswithrespecttothecontentshereofandspecificallydisclaimsanyimpliedwarrantiesofmerchantability

orfitnessfor aparticular purpose.Further,Paradyne Corporationreserves therightto revisethispublication andto makechangesfrom timeto timeinthe contents

hereof without obligation of Paradyne Corporation to notify any person of such revision or changes.

Printed on recycled paper

Safety Instructions

B3000-A2-GB41-50 October 2002

!Important Safety Instructions

1. Read and follow all warning notices and instructions marked on the product or

included in the manual.

2. Slots and openings in the cabinet are provided for ventilation. To ensure reliable

operation of the product and to protect it from overheating, these slots and openings

must not be blocked or covered.

3. Do not attempt to service this product yourself, as opening or removing covers may

expose you to dangerous high voltage points or other risks. Refer all servicing to

qualified service personnel.

4. General purpose cables are provided with this product. Special cables, which may be

required by the regulatory inspection authority for the installation site, are the

responsibility of the customer. To reduce the risk of fire, use a UL Listed or CSA

Certified, minimum No. 26 AWG telecommunication cable.

5. When installed in the final configuration, the product must comply with the applicable

Safety Standards and regulatory requirements of the country in which it is installed. If

necessary, consult with the appropriate regulatory agencies and inspection

authorities to ensure compliance.

6. This product is to be conneted to a 48 VDC SELV supply source that is electrically

isolated from the AC source. The positive terminal of the 48 VDC source is to be

reliably connected to earth. Connect a green/yellow earthing (grounding) wire to the

protective earthing (grounding) lug connector, identified by the protective earth

symbol on the chassis.

7. In addition, if the equipment is to be used with telecommunications circuits, take the

following precautions:

—Never install telephone wiring during a lightning storm.

—Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

—Never touch uninsulated telephone wires or terminals unless the telephone line

has been disconnected at the network interface.

—Use caution when installing or modifying telephone lines.

—Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

—Do not use the telephone to report a gas leak in the vicinity of the leak.

COMSPHERE –48 Vdc Central Office Power Unit

COctober 2002 3000-A2-GB41-50

Notices

!WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

The authority to operate this equipment is conditioned by the requirements that no modifications

will be made to the equipment unless the changes or modifications are expressly approved by

Paradyne Corporation.

!WARNING:

To Users of Digital Apparatus in Canada:

This Class A digital apparatus meets all requirements of the Canadian interference-causing

equipment regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du règlement sur le matérial

brouilleur du Canada.

i3000-A2-GB41-50 October 2002

Table of Contents

Preface

Objectives and Reader Assumptions v. . . . . . . . . . . . . . . . . . . . . . . . .

Abstract v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Related Documents v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Introduction

Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Features 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Technical Specifications 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Equipment Warranty and Support 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Installation

Overview 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation Considerations 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CO Power Unit Installation 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air Filter and Brackets Installation (Optional) 2-20. . . . . . . . . . . . . . . . .

COMSPHERE –48 Vdc Central Office Power Unit

ii October 2002 3000-A2-GB41-50

3. Troubleshooting and Maintenance

Overview 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Indicators and Controls 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Module Replacement Instructions 3-3. . . . . . . . . . . . . . . . . . . . .

Preventive Maintenance 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A. Interface Connections

Glossary

Index

iii3000-A2-GB41-50 October 2002

List of Figures

Figure Page

1-1. Central Office (CO) Power Unit with One Power Module 1-3. . . . . . . . . . . . . . . . . . . .

1-2. Central Office (CO) Power Unit with Two Power Modules 1-3. . . . . . . . . . . . . . . . . . .

2-1. Installing the Optional Second Power Module 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-2. Option Straps (S1 through S5) on the CO Power Unit’s Backplane 2-6. . . . . . . . . . . . .

2-3. CO Power Unit Installation 2-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-4. COMSPHERE 3000 Series Carrier (Rear) 2-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-5. Using One Power Source and One Input Power Cable for Basic (shown) or

Redundant Mode 2-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-6. Using Two Separate Power Sources for Independent Mode or Redundant Mode 2-13. .

2-7. Using One Power Source and Two Input Power Cables for Independent Mode or

Redundant Mode 2-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-8. Installing the SDCP 2-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-9. Connecting an NMS Adapter Cable to a Modular 3611 DSU When the DTE

Interface is EIA-232 2-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-10. Connecting an NMS Adapter Cable to a Modular 3611 DSU When the DTE

Interface is V.35 2-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-11. Air Filter Brackets Installation 2-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-1. LED Status Indicators 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2. Replacing a Power Module 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-1. CO Power Unit (Rear) A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-2. Connector Housing and Contact A-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-3. NMS Adapter Cable (Feature Number 3000-F2-510) A-6. . . . . . . . . . . . . . . . . . . . . . . .

COMSPHERE –48 Vdc Central Office Power Unit

iv October 2002 3000-A2-GB41-50

List of Tables

Table Page

1-1 Technical Specifications for Central Office (CO) Power Unit 1-4. . . . . . . . . . . . . . . . .

2-1 Maximum Ambient Temperatures Permitted 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-2 Settings for Basic Mode 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-3 Settings for Independent Mode 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-4 Settings for Redundant Mode Using a Single –48 Vdc Power Source and a Single

Input Power Cable 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-5 Settings for Redundant Mode with Either a Single Power Source and Two Input

Power Cables, or Two Separate Power Sources and Two Input Power Cables 2-7. . . . .

2-6 Jumper Settings 2-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-1 Pin Assignments of the DC Inputs A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-2 AMP Part Numbers A-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A-3 Pin Assignments for the CO Alarm System Outputs A-4. . . . . . . . . . . . . . . . . . . . . . . . .

A-4 Pin Assignments for the NMS Adapter Cable A-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

v3000-A2-GB41–50 October 2002

Preface

Objectives and Reader

Assumptions

This guide contains installation information for the

COMSPHEREr–48 Vdc Central Office (CO) Power Unit

which is designed to be used with COMSPHERE

3000 Series Carriers.

It is assumed that you are familiar with the functional

operation of data equipment, digital network services,

data service units (DSUs), dial/lease modems, T1 channel

service units (CSUs) and T1 data service units/channel

service units (DSU/CSUs).

Abstract

Chapter 1 provides descriptive information about the

–48 Vdc CO Power Unit.

Chapter 2 provides installation consideration

information and procedures for installing an optional

second power module, setting the option straps, installing

the –48 Vdc CO Power Unit, providing power to the

power unit, installing a Shared Diagnostic Control Panel

(SDCP), connecting to a CO Alarm System or a

COMSPHERE 6800 Series Network Management System

(NMS), and installing an optional air filter and brackets.

Chapter 3 describes the status indicators on the

faceplate of the power module. It also provides

troubleshooting guidelines and replacement instructions

for the power module, and a preventive maintenance

schedule for the optional air filter.

Appendix A contains interface connector pin

assignment information.

The Glossary provides definitions for acronyms and

product-specific terms used in this guide.

The Index lists key terms, acronyms, concepts, and

sections in alphaorder.

Popular Portable Generator manuals by other brands

Kohler

Kohler 20EORZ Operation

Powerhorse

Powerhorse 83171 owner's manual

HURST

HURST ML-630-SI instruction manual

ETQ

ETQ TG4000 owner's manual

Briggs & Stratton

Briggs & Stratton 40265 Illustrated parts list

ConMed

ConMed 7550 Service manual

Owon

Owon Waveform Generator manual

evertz

evertz 7700 Series manual

Power Stroke

Power Stroke PS906025 Operator's manual

Firefly

Firefly Cygnus CYG2400/460/24 user manual

Draper

Draper PG950S Instructions for

PowerBoss

PowerBoss PowerBoss Operator's manual

SDMO

SDMO SH 4000 Generating set user and maintenance manual

EINHELL

EINHELL STE 5500 operating instructions

Wanco

Wanco WI3000P Operator's manual

Full Boar

Full Boar FBT-3300 instruction manual

Dwyer Instruments

Dwyer Instruments ASG manual

Westinghouse

Westinghouse WH1000i Series owner's manual