Panasonic PT-LC50E User manual

Operating Instructions

Please read these instructions completely before operating

this LCD Projector.

Model No. PT-LC50E

LCD PROJECTOR

By clicking on the red highlighted words in this document, you

can go directly to a support page.

Top page

Downloaded From projector-manual.com Panasonic Manuals

screen

This instruction manual provides all the necessary operating

information that you might require. We hope it will help you to

get the most performance out of your new product, that you will

be pleased with your Panasonic LCD Projector.

For your own protection and prolonged operation of your LCD

Projector, please be sure to read the “Important Safeguards”

carefully, before use.

Dear Panasonic Customer:

Caution:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician

for help.

Things You Should Know

Continued on the next page...

Downloaded From projector-manual.com Panasonic Manuals

screen

Warning: (E.U. only)

To assure continued CE Mark compliance, use only the provided

earthed power supply cord and prevent undesirable interference, use

only the provided shielded VGA cable with 2 ferrite cores while

connecting LCD to computer and all other connecting cables should be

shielded.

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user‘s authority to operate

this equipment.

Things You Should Know

All product/brand names are trademarks or registered trademarks of the

respective holders.

Declaration of Conformity (USA only)

Model Number: PT-LC50E

Trade Name:

Responsible party: Matsushita Electric Corporation of America.

Address: One Panasonic Way Secaucus New Jersey 07094

Telephone number: 1-800-528-8601

This device complies with Part 15 of the FCC Rules, Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC Warning: (USA only)

To assure continued FCC compliance, use only the provided grounded

power supply cord and prevent undesirable interference, use only the

provided shielded VGA cable with 2 ferrite cores while connecting LCD

to computer and all other connecting cables should be shielded. Any

changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

Downloaded From projector-manual.com Panasonic Manuals

screen

Important Safeguards

Electrical energy can perform many useful functions.

This LCD Projector has been engineered and

manufactured to meet applicable safety standards. But

IMPROPER USE CAN RESULT IN POTENTIAL

ELECTRICAL SHOCK OR FIRE HAZARDS. In order not

to defeat the safeguards incorporated into this LCD

Projector, observe the following basic rules for its

installation, use and servicing.

1Unplug the LCD Projector from the wall outlet before

cleaning.

2Do not use liquid cleaners or aerosol cleaners. Use a

soft dry cloth to clean the LCD Projector unit. If the

unit is very dirty, wet a cloth with neutral detergent,

squeeze it tight, wipe the unit with it, and finish by

wiping with a dry cloth. Do not use a chemical duster

or polisher-cleaner because it can adversely affect

the unit and peel the paint coat.

3Do not use attachments not recommended by

Panasonic, as they may cause hazards.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991:

The sound pressure level at the operator position is equal or less

than 44 dB (A) according to ISO 7779. (However, this is when the

ambient temperature is less than

30 °C.)

CAUTION: Please read all of these instructions

before you operate your LCD Projector.

Save these instructions for future

reference.

Continued on the next page...

Downloaded From projector-manual.com Panasonic Manuals

screen

4Do not use the LCD Projector near water; for example,

near a bathtub, washbowl, kitchen sink, laundry tub, in

a wet basement, near a swimming pool, etc. Never spill

liquid into the LCD Projector.

5Do not place the LCD Projector on an

unstable cart, stand, or table. The LCD

Projector may fall, which may cause

serious injury to a child or an adult,

and/or serious damage to the unit. Use

only with a cart or stand recommended

by its manufacturer, as being suitable for use with the

LCD Projector.

6The LCD Projector equipment and cart combinations

should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the equipment

and cart combination to overturn.

7Slots and openings in the cabinet back and bottom are

provided for ventilation. To ensure reliable operation of

the LCD Projector and to protect it from overheating,

these openings must not be blocked or covered. These

openings should never be covered with cloth or other

material. The bottom opening should not be blocked by

placing the LCD Projector on a bed, sofa, rug, or other

similar surface. The LCD Projector should not be

placed near or over a radiator or heating vent. The

LCD Projector should not be placed in a built-in

installation such as a bookcase unless proper

ventilation is provided.

Important Safeguards

Continued on the next page...

Downloaded From projector-manual.com Panasonic Manuals

screen

8The LCD Projector should be operated only from the

type of power source indicated on the back of the LCD

Projector or in the specifications. If you are not sure of

the type of power supplied to your home, consult your

LCD Projector dealer or local power company.

9Do not allow anything to rest on the power cord. Do

not place the LCD Projector where the cord will be

walked on.

10 Follow all warnings and instructions marked on the

LCD Projector.

11 As a safety feature, the LCD Projector is equipped with

a 3-prong grounded plug. The 3-prong grounded plug

will fit only into a grounding type power outlet. If the

plug does not fit, use an adaptor that is properly

grounded or have an electrician install a grounded

type outlet. Do not attempt to modify this AC plug.

12 For added protection of the LCD Projector during a

lightning storm, or when it is left unattended or not in

use for long periods of time, unplug it from the wall

outlet and disconnect any cable systems. This will

prevent damage to the projector due to lightning and

power-line surges.

13 Do not overload wall outlets and extension cords with

too many products, because this can result in fire or

electric shock.

Important Safeguards

Continued on the next page...

Downloaded From projector-manual.com Panasonic Manuals

screen

14 Never push objects of any kind into the LCD Projector

through cabinet slots as they may touch dangerous

voltage points or short out parts, which could result in

a fire or electric shock.

15 Do not attempt to service the LCD Projector yourself.

Opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

16 Unplug the LCD Projector equipment from the wall

outlet and refer servicing to qualified service

personnel under the following conditions:

A.When the power cord or plug is damaged or frayed.

B.If liquid has been spilled into the LCD Projector.

C.If the LCD Projector has been exposed to rain or

water.

D.If the LCD Projector does not operate normally when

you follow the operating instructions. Adjust only

those controls that are covered by the operating

instructions; improper adjustment of other controls

may cause damage and will often require extensive

work by a qualified technician to restore the LCD

Projector to normal operation.

E.If the LCD Projector has been dropped or the

cabinet has been damaged.

F. When the LCD Projector exhibits a distinct change in

performance – this indicates a need for service.

Important Safeguards

Continued on the next page...

Downloaded From projector-manual.com Panasonic Manuals

screen

17 Upon completion of any service or repairs to the LCD

Projector, ask the service technician to perform a

routine safety check to determine that the LCD

Projector is in safe operating condition.

18 When replacement parts are required, be sure the

service technician has used replacement parts

specified by the manufacturer that have the same

characteristics as the original parts. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

19 Air filter should be cleaned every 100 lamp on hours.

The LCD Projector may become too hot if filter is not

cleaned when required.

20 If lens becomes dirty, or smudged, clean with a clean,

dampened cloth. Never touch the lens with your

fingers.

21 Do not look directly into the aperture and lens while

operating as this may result in damage to your eyes.

Important Safeguards

Continued on the next page...

Downloaded From projector-manual.com Panasonic Manuals

screen

IMPORTANT: THE MOULDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT

CAREFULLY.

This appliance is supplied with a moulded three pin mains

plug for your safety and convenience. A 13 amp fuse is

fitted in this plug. Should the fuse need to be replaced, please

ensure that the replacement fuse has a rating of 13 amps and

that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of

the fuse.

If the plug contains a removable fuse cover, you must ensure

that it is refitted when the fuse is replaced.

If you lose the fuse cover, the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your local

Panasonic Dealer.

If the fitted moulded plug is unsuitable for the socket

outlet in your home, then the fuse should be removed and

the plug cut off and disposed of safely. There is a danger

of severe electrical shock if the cut off plug is inserted

into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as

shown below.

If in any doubt, please consult a qualified electrician.

Important Safeguards

Continued on the next page...

Downloaded From projector-manual.com Panasonic Manuals

screen

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are coloured in

accordance with the following code:

Green-and-Yellow: Earth

Blue: Neutral

Brown: Live

As the colours of the wire in the mains lead of this appliance

may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows.

The wire which is coloured GREEN-AND-YELLOW must be

connected to the terminal in the plug which is marked with

the letter E or by the Earth symbol or coloured GREEN

or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the

terminal in

the plug which is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must be connected to

the terminal

in the plug which is marked with the

letter L or coloured RED.

How to replace the fuse. Open the fuse

compartment with a screwdriver and

replace the fuse.

Important Safeguards

FUSE

Downloaded From projector-manual.com Panasonic Manuals

Table of contents

Other Panasonic Projector manuals

Panasonic

Panasonic PT-LB30NT User manual

Panasonic

Panasonic PTL797U - LCD PROJECTOR User manual

Panasonic

Panasonic PT-LB51NTEA User manual

Panasonic

Panasonic PT-DW7000U-K User manual

Panasonic

Panasonic pt-p1sdea User manual

Panasonic

Panasonic PT-LB51SU User manual

Panasonic

Panasonic PT-JX200FBE User manual

Panasonic

Panasonic PT-DZ13KU User manual

Panasonic

Panasonic PT-RQ35K User manual

Panasonic

Panasonic PT-65WX50 User manual

Panasonic

Panasonic PT-D5500 System manual

Panasonic

Panasonic FW300 User manual

Panasonic

Panasonic PTLB10SU - LCD PROJECTOR User manual

Panasonic

Panasonic PTL6600U - LCD PROJECTOR User manual

Panasonic

Panasonic PT-FW100NTA User manual

Panasonic

Panasonic PT-AX200 User guide

Panasonic

Panasonic PT-LB75V User manual

Panasonic

Panasonic PT-LMZ460 Operating instructions

Panasonic

Panasonic PT-JX200FBU User manual

Panasonic

Panasonic PT-RZ570 User manual

Panasonic

Panasonic PT-DS20KU User manual

Panasonic

Panasonic PT-LM2U User manual

Panasonic

Panasonic PT-D4000E User manual

Panasonic

Panasonic PT-TW330EA User manual

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual

Asus

Asus ZenBeam Latte user manual