Panasonic Lumix DMC-FZ50 Reference guide

[ Procedure of version-up for the Panasonic Digital Camera ]

This is the procedure to version-up the firmware into the latest version (Ver1.07) for DMC-FZ50.

1. Confirm the present firmware version

2. Download the firmware from HP

3. Copy the download file into the SD memory card

4. Write the firmware by the SD Memory Card

5. Confirm the newly written firmware version

< 1. Confirm the present firmware version >

The method of version confirmation for the firmware which is inside the camera is as follows.

1) Turn the "Power SW" off and connect AC Adapter and insert the battery and "SD card" which has recorded image data.

2) Set the mode dial into "Program AE" mode.

3) Turn the "Power SW" on pressing "OIS" and "Upper side cross key" simultaneously.

4) Set the mode dial into "Playback" mode.

5) After pressing "OIS" and "Downer side cross key" simultaneously, below message appears.

Remarks:

Beforehand, press "DISPLAY" button several times so that the indication on LCD monitor appears.

In case the setting condition is in Non-display mode, firmware version information does not appear.

6) After pressing "OIS" and "Downer side cross key" simultaneously again, firmware version display function is released automatically.

< 2. Download the firmware from HP >

1) Download the new firmware from AVCNBG CS-WEB Home Page

　　in your PC.

2) Expand the firmware, if the data is compressed.

< 3. Copy the download file into the SD memory card >

1) Copy the firmware "Ver 1.07" into the SD card using USB connected

connected DSC etc.

The name of firmware is "FZ50_107.bin". (extension name is "bin")

Remarks:

The location of the firmware in the SD card should be on the root position.

(Do not put the firmware in any folder. See right fig.)

2) After making the copy, disconnect the USB cable from DSC, if you utilize

DSC to make a copy.

Remarks:

Use SD card which has blank area more than 8MB.

In this case, it shows version "1.00"

Copy the firmware on

the root position.

1.00

< 4. Write the firmware by the SD Memory Card >

Remarks:

Do not turn off while version-up operation. Otherwise the Flash rom may be damaged.

In case the firmware has been already upgraded to "Ver1.0E", below version up function is not available.

1) Supply the power to the camera using the battery and AC adaptor. (Set the power SW off at this stage.)

2) Set the copied "SD card" into the camera.

3) Set the mode dial into "Play" position.

4) After turn the "Power SW" on, automatically below menu appears on the LCD monitor.

5) Select "YES", then press the "MENU／SET Key".

After that, the firmware and ROM data are automatically written in the Flash memory inside of the camera.

Do not turn off the power while version-up operation, since the Flash rom may be damaged.

6) While version-up period, the green LED starts blinking and OSD becomes as below. (writing period is about 50 seconds.)

7) When playback picture or the message "NO VALID IMAGE TO PLAY" appears on the LCD monitor, version-up work is completed.

Turn the Power SW off.

< 5. Confirm the newly written firmware version >

1) Set the "Power SW" off and connect AC Adapter and insert the battery and "SD card".

2) Set the mode dial into "Program AE" mode.

3) Turn the "Power SW" on pressing "OIS" and "Upper side cross key" simultaneously.

4) Set the mode dial into "Playback" mode.

5) After pressing "OIS" and "Downer side cross key" simultaneously, below message appears.

6) After pressing "OIS" and "Downer side cross key" simultaneously again, firmware version display function is released automatically.

END

In this case, version up is completed.

It means the firmware version up to

version 1.07.

Other manuals for Lumix DMC-FZ50

Table of contents

Other Panasonic Digital Camera manuals

Panasonic

Panasonic Lumix DMC-FT4 Technical specifications

Panasonic

Panasonic Lumix DMC-GF3KPP User manual

Panasonic

Panasonic LUMIX DMC-TZ4 User manual

Panasonic

Panasonic DMC-SZ7K Installation and service instructions

Panasonic

Panasonic Lumix DC-LX100M2P User manual

Panasonic

Panasonic DMC-G1K - Lumix Digital Camera User manual

Panasonic

Panasonic LUMIX DC-G9M2 User manual

Panasonic

Panasonic Lumix DMC-G3XEB User manual

Panasonic

Panasonic Lumix DMC-FZ1000 User manual

Panasonic

Panasonic Lumix DMC-FS35 User manual

Panasonic

Panasonic Lumix DMC-ZR1 Technical specifications

Panasonic

Panasonic DMC-F7PP User manual

Panasonic

Panasonic DMC-FT6GA User manual

Panasonic

Panasonic Lumix DMC-SZ7 User manual

Panasonic

Panasonic Lumix DMC-FZ35 User manual

Panasonic

Panasonic HDC-HS20P User manual

Panasonic

Panasonic Lumix DMC-LZ30 User manual

Panasonic

Panasonic Lumix DMC-FZ50 User manual

Panasonic

Panasonic Lumix DMC-ZS7 User manual

Panasonic

Panasonic LUMIX DMC-FX520 User manual

Panasonic

Panasonic LUMIX DMC-FZ100 User manual

Panasonic

Panasonic AG-CK10P User manual

Panasonic

Panasonic Lumix DMC-F1A User manual

Panasonic

Panasonic Lumix DC-G95 User manual

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions