Panasonic GP-US932CSAE User manual

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Operating Instructions

HD Camera Control Unit

Model Nos. GP-US932CSAE

GP-US932CAE

DCPOWER

CAMERA

123

LOW

SCENE

BAR

AWC

GAIN

DRANGE

FREEZE

SEL

HIGH

EXPAND

OFF

This llustration represents GP-US932CSAE.

Camera head: Option

Camera cable: Option

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

WARNING:

• To prevent fire or electric shock hazard, do not expose this

apparatus to rain or moisture.

• The apparatus should not be exposed to dripping or splashing

and that no objects filled with liquids, such as vases, should

be placed on the apparatus.

• All work related to the installation of this product should be

made by qualified service personnel or system installers.

• The connections should comply with local electrical code.

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated "dangerous voltage" within

the product's enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

Before attempting to connect or operate this product, please

read the label on the bottom.

The exclamation point within an equilater-

al triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

We declare under our sole responsibility that the product to which this

declaration relates is in conformity with the standards or other norma-

tive documents following the provisions of Directives 2006/95/EC and

2004/108/EC.

Wij verklaren als enige aansprakelijke, dat het product waarop deze

verklaring betrekking heeft, voldoet aan de volgende normen of

andere normatieve documenten, overeenkomstig de bepalingen van

Richtlijnen 2006/95/EC en 2004/108/EC.

Vi erklærer os eneansvarlige for, at dette produkt, som denne

deklaration omhandler, er i overensstemmelse med standarder eller

andre normative dokumenter i følge bestemmelserne i direktivene

2006/95/EC og 2004/108/EC.

Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken

denna deklaration hänvisar är i överensstämmelse med

standarddokument, eller andra normativa dokument som framställs i

direktiv nr. 2006/95/EC och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä

ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia

asiakirjoja, jotka noudattavat direktiivien 2006/95/EC ja 2004/108/EC

säädöksiä.

Vi erklærer oss alene ansvarlige for at produktet som denne

erklæringen gjelder for, er i overensstemmelse med følgende normer

eller andre normgivende dokumenter som følger bestemmelsene i

direktivene 2006/95/EC og 2004/108/EC.

Important safety instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace-

ment of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When

a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

S3125A

ENGLISH

CONTENTS

Important safety instructions ........................................................................................................... 3

Limitation of liability ......................................................................................................................... 5

Disclaimer of warranty .................................................................................................................... 5

Precautions ..................................................................................................................................... 6

Preface ............................................................................................................................................ 7

Trademarks and registered trademarks ......................................................................................... 7

Major operating controls and their functions .................................................................................. 8

■Camera head ........................................................................................................................... 8

■Camera control unit (CCU) ......................................................................................................8

Precautions for installation .............................................................................................................. 12

Installations/connections ................................................................................................................. 13

■How to mount lens ................................................................................................................... 14

Setup procedure ............................................................................................................................. 15

■Setup menu .............................................................................................................................. 15

1. Camera title setting [CAMERA ID] ......................................................................................... 17

2. ELC setting [ELC] .................................................................................................................. 18

3. Electronic shutter setting [SHUTTER] .................................................................................... 19

4. Gain adjustment [GAIN] ......................................................................................................... 19

5. Electronic sensitivity enhancement setting [SENS UP] ......................................................... 19

6. RGB/YPbPr output signal setting [OUTPUT SEL] .................................................................. 19

7. HDMI output signal setting [HDMI OUTPUT] ......................................................................... 19

8. Scene file setting [SCENE FILE] ............................................................................................ 20

9. White balance setting [WHITE BAL] ...................................................................................... 23

10. Black balance setting [BLACK BAL] ..................................................................................... 24

11. Synchronization setting [SYNC] ............................................................................................. 24

12. Configure the settings relating to the electronic zoom [ELECTRIC ZOOM] .......................... 25

13. Image freezing [FREEZE] ..................................................................................................... 25

14. Setting of vertical flip function [FLIP ENABLE] ...................................................................... 25

15. Setting of horizontal flip function [MIRROR ENABLE] ............................................................ 25

16. Display setting of vertical and horizontal flip function [STATUS DISPLAY] ........................... 25

Default restoring .......................................................................................................................... 25

SEL menu ........................................................................................................................................ 26

■How to display/operate the SEL menu .................................................................................... 26

■Button assignment ................................................................................................................... 26

Troubleshooting .............................................................................................................................. 27

Specifications .................................................................................................................................. 29

Standard accessories ..................................................................................................................... 30

Optional accessories ...................................................................................................................... 30

Limitation of liability

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY, FIT-

NESS FOR ANY PARTICULAR PURPOSE, OR NON-

INFRINGEMENT OF THE THIRD PARTY’S RIGHT.

THIS PUBLICATION COULD INCLUDE TECHNICAL

INACCURACIES OR TYPOGRAPHICAL ERRORS.

CHANGES ARE ADDED TO THE INFORMATION HERE-

IN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS

PUBLICATION AND/OR THE CORRESPONDING PROD-

UCT (S).

Disclaimer of warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE

TO ANY PARTY OR ANY PERSON, EXCEPT FOR

REPLACEMENT OR REASONABLE MAINTENANCE OF

THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT

LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT

LIMITATION, DIRECT OR INDIRECT, SPECIAL, CON-

SEQUENTIAL OR EXEMPLARY, ARISING OUT OF

OR RELATING TO THE PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY

INAPPROPRIATE USE OR NEGLIGENT OPERATION

OF THE USER;

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODI-

FICATION OF THE PRODUCT BY THE USER;

(4) INCONVENIENCE OR ANY LOSS ARISING WHEN

IMAGES ARE NOT DISPLAYED, DUE TO ANY REA-

SON OR CAUSE INCLUDING ANY FAILURE OR

PROBLEM OF THE PRODUCT;

(5) ANY PROBLEM, CONSEQUENTIAL INCONVE-

NIENCE, OR LOSS OR DAMAGE, ARISING OUT OF

THE SYSTEM COMBINED BY THE DEVICES OF

THIRD PARTY;

(6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT

BY ANY PERSON OR ORGANIZATION BEING A

PHOTOGENIC SUBJECT, DUE TO VIOLATION OF

PRIVACY WITH THE RESULT OF THAT SURVEIL-

LANCE-CAMERA'S PICTURE, INCLUDING SAVED

DATA, FOR SOME REASON, BECOMES PUBLIC OR

IS USED FOR THE PURPOSE OTHER THAN SUR-

VEILLANCE.

Precautions

Refer installation work to the dealer.

Installation work requires technique and experiences.

Failure to observe this may cause fire, electric shock,

injury, or damage to the product.

Be sure to consult the dealer.

Stop the operation immediately when something is

wrong with the camera.

When smoke goes up from the camera or the smell of

smoke comes from the camera, stop the operation imme-

diately and contact your dealer.

Turn the power off immediately and contact qualified ser-

vice personnel for service.

Do not attempt to disassemble this product.

To prevent electric shock, do not remove screws or cov-

ers.

There are no user-serviceable parts inside.

Ask qualified service personnel for servicing.

Do not insert any foreign objects into this product.

Failure to observe this may cause damage to this prod-

uct.

Turn the power off immediately and contact qualified ser-

vice personnel for service.

Do not use this product in an inflammable atmos-

phere.

Failure to observe this may cause an explosion resulting

in injury.

Avoid installing this product in the locations where

salt damage occurs or corrosive gas is produced.

Otherwise, the mounting portions will deteriorate and

accidents such as a fall of the camera may occur.

Do not operate this product beyond the specified tem-

perature, humidity or power source ratings.

Use this product at temperature within 0 °C to 40 °C and

humidity below 90 %. The input power source is 12 V DC.

To keep on using with stable performance

Parts of this product may deteriorate and it may shorten

the lifetime of this product when using in locations sub-

ject to high temperatures and high humidity.

Use this product at temperatures between 0 °C to 40 °C.

Failure to observe this may adversely affect the compo-

nents inside or cause this product to malfunction. Use of

this product at temperatures of 30 °C or lower is recom-

mended without direct heat from heaters in consideration

of heat release at the camera location.

Handle this product with care.

Do not abuse this product. Avoid striking, shaking, etc.

The product could be damaged by improper handling or

storage.

Do not aim the camera head at strong light sources.

A light source such as a spot light causes a blooming

(light bleeding) or a smear (vertical lines).

Clean the main body with care.

Turn the power off when cleaning the product. Failure to

observe this may cause injury or malfunction.

Use a dry cloth to clean this product. Do not use strong

abrasive detergent when cleaning this product. When the

dirt is hard to remove, use a mild detergent and wipe

gently. Then, wipe off the remaining detergent with a dry

cloth.

Otherwise, it may cause discoloration. When using a

chemical cloth for cleaning, read the caution provided

with the chemical cloth product.

Clean the faceplate with care.

Do not clean the faceplate with strong or abrasive deter-

gents. Use lens tissue or a cotton tipped applicator and

ethanol.

To remove stubborn stains

When the dirt is hard to remove, use a mild detergent and

wipe gently. Then, wipe off the remaining detergent with

a dry cloth.

Indication label

Refer to the indication label placed on the surface of the

unit as to the indications of equipment classification and

power source, etc.

Smear Bright subject

Blooming

This product is intended for usage in general electron-

ics applications.

The usage of this product for special purposes, such

as traffic control instruments, transportation instru-

ments, and medical instruments, may be prohibited

without authorization under the applicable laws and

regulations of each country or region where this prod-

uct is in practical use.

The arrangement for the authorization shall be made

under customer's or user's own responsibility.

Preface

This system is a compact and light type camera control unit (hereafter called CCU) with high image quality and multiple

functions by introducing digital signal processing. The camera head is separately mounted.

• GP-US932CSAE; HD Camera Control Unit (HDMI and SDI output connectors equipped)

• GP-US932CAE; HD Camera Control Unit (HDMI output connector equipped)

This product is used in combination with the optional camera head.

• GP-US932HAE; 3CCD HD Camera Head

• The multi-format output applicable to 1 080p, 1 080i, 720p, 576p, and 576i is available.

• Signal transmission without signal degradation has been achieved thanks to the HDMI or SDI output connectors.

• The dynamic range expansion function allows users to shoot even images with a wide range of brightness contrast

and facilitate their visibility.

The descriptions in this book are predicated on a system with the optional camera head.

Trademarks and registered trademarks

HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

LLC.

Major operating controls and their functions

■Camera head

qLens mount section

A C-mount lens is mounted on this section. (☞page

14)

wCamera cable connector

The camera cable (option) is connected to this con-

nector.

<HD Camera Cable> (option)

GP-CA932/4E (4 m)

GP-CA932/6E (6 m)

GP-CA932/10E (10 m)

GP-CA932A20E (20 m)

eTripod socket

The tripod socket hole is used when the camera head

is secured to the tripod.

The tripod socket can be mounted on either top or

bottom of the camera head.

Tripod socket hole: 1/4-20 UNC

Important:

• Be sure to turn off the power of the CCU before con-

necting or disconnecting the camera cable.

• Avoid bending excessively or breaking the camera

cable.

• Use the specific-camera head only.

GP–US932A

CAMERA

SEL

FREEZE

LOW HIGH

DC POWER

213

SCENE GAIN

EXPAND

D RANGE

BAR

AWC

OFF

tyuio

rPower switch [DC POWER]

This switch toggles the power of the CCU and cam-

era head on and off. The switch lights green while the

power is turned on.

tScene file selection button [SCENE]

The button selects a scene file from 1 to 3. Each

scene file should be set up beforehand using the

SETUP menu. (☞page 20)

Selection of a scene file turns on the green indicator

of the selected file number.

yGain selection button [GAIN]

The gain is selectable from OFF, LOW, and HIGH.

Selection of a gain turns on the green indicator of the

selected gain. No indicator is turned on when the

gain is set to off.

Selectable gain varies depending on the gain setting

in the SETUP menu (☞page 19).

When GAIN is set to "AUTO" and SENS UP is set

to "OFF": The gain is unchangingly set to "HIGH".

■Camera control unit (CCU)

uFreeze/menu button [FREEZE ]

Pressing this button: Displays the current image as

a static image when "FREEZE" in the SETUP menu

is set to "ON".

Note:

• Pressing a button other than the [g] and [h] buttons

provides freeze cancellation.

• When the zoom in/out or vertical/horizontal flip func-

tions are assigned to the [e]/[f] buttons respective-

ly, the frozen image can be reversed vertically or hori-

zontally. Refer to page 26 for assigning function to

buttons.

Holding down this button for 2 sec or more:

Displays the SETUP menu.

iSelection button [SEL]

Pressing this button while the SETUP menu is dis-

played determines the setting.

Pressing this button except while the SETUP menu is

displayed calls up the SEL menu. (☞page 26)

oUp/down/left/right buttons

Up button [g]: This button moves the cursor upward

to change a setting item while the SETUP menu is

displayed.

When "FLIP ENABLE" or "MIRROR ENABLE" in the

SET UP menu is set to "ON" (☞page 25), the

image can be flipped vertically or horizontally.

Down button [h]: This button moves the cursor

downward to change a setting item while the

SETUP menu is displayed.

When "FLIP ENABLE" or "MIRROR ENABLE" in the

SET UP menu is set to "ON" (☞page 25), the

image can be flipped vertically or horizontally.

Left button [e]: This button moves the cursor left-

ward or selects a setting while the SETUP menu is

displayed.

This button moves the cursor in the minus direc-

tion on the level adjustment scale or selects a set-

ting item while the SEL menu is displayed.

The functions of the SEL menu can also be

assigned to buttons (☞page 26).

Right button [f]: This button moves the cursor right-

ward or selects a setting while the SETUP menu is

displayed.

This button moves the cursor in the plus direction

on the level adjustment scale or selects a setting

item while the SEL menu is displayed.

The functions of the SEL menu can also be

assigned to buttons (☞page 26).

MENU !0 Color bar display/AWC button [BAR ]

Pressing this button: Calls up the color bar on the

screen while an image is displayed. The color bar

becomes a blue back display while the SETUP

menu is displayed.

Holding down this button for 2 sec or more: Starts

up AWC while an image is displayed if "WHITE

BAL" in the SETUP menu is set to "AWC" (☞page

23).

Important:

• When the camera head is not connected, pressing

the [BAR ] button does not activate any opera-

tion.

!1 Dynamic range selection button [D RANGE]

This button toggles the dynamic range between

NORMAL and EXPAND. The button lights green when

"EXPAND" is selected.

"EXPAND" shall be selected when dark portions are

less viewable because too bright portions are present

in a screen.

Note:

• The dynamic range can be set for each scene file.

(☞page 21)

!2 Camera cable connector

The camera cable (option) is connected to this con-

nector.

AWC

FRONT SW

OFF

REMOTE

VIDEO FORMAT

SEE THE TOP LABEL.

DC 12V INREMOTES–VIDEORGB/YPb P r

OUT

VIDEO SYNC

1234

SDI

FRONT SW

OFF

REMOTE

VIDEO FORMAT

SEE THE TOP LABEL.

DC 12V INREMOTES–VIDEORGB/YPb P r

OUT

VIDEO SYNC

1234

!5 !6

@0 !9

!6!5

!9@0

●GP-US932CAE

●GP-US932CSAE

!3 HDMI output connector [HDMI]

This connector is used to connect to an HDMI-ready

monitor.

!4 SDI output connector [SDI] (*only for GP-

US932CSAE)

This terminal provides HD-SDI or SD-SDI output

signal.

Important:

• Please use a high quality cable compatible with HD-

SDI.

!5 Video output connector [VIDEO]

This connector provides composite video signal.

!6 Synchronizing signal output/input connector

[SYNC]

When an external device is synchronized, set the syn-

chronizing signal output/input selection switch !7 to

"IN" to provide the synchronizing signal input.

When the synchronizing signal output/input selection

switch !7 is set to "OUT", the terminal provides the

synchronizing signal output conformable to the video

format of the RGB/YPbPr output connector of this sys-

tem.

Important:

• The video format shall be the same among the syn-

chronized devices.

!7 Synchronizing signal output/input selection

switch [OUT/IN]

This switch toggles synchronizing signals between

output and input.

When the synchronizing signal output is selected, set

this switch to "OUT". When the synchronizing signal

input is selected, set this switch to "IN".

!8 Function setup switches

These switches select a video format for RGB/YPbPr

output connector, SDI output connector, and HDMI

output connector.

–: Either ON or OFF

Switch

OFF

REMOTE

(External control)

FRONT SW

(Button operation

via front face)

No Signal

Switch

OFF

–

OFF

1 080p

1 080p(sF)

1 080i

720p

576p

576i

1 080i

1 080p(sF)

1 080i

720p

576i

1 080i

1 080p(sF)

1 080i

720p

576p

576i

HDMI

Output

SDI

Output

RGB/

YPbPr

This manual suits for next models

Table of contents

Languages:

Other Panasonic Control Unit manuals

Panasonic

Panasonic PAN1322-SPP User manual

Panasonic

Panasonic AJRC10G - REMOTE CONTROL UNIT User manual

Panasonic

Panasonic CA-RC3000EU User manual

Panasonic

Panasonic CF-BAH0256U User manual

Panasonic

Panasonic EBL512 G3 5000 Technical manual

Panasonic

Panasonic AFP0HC32ET User manual

Panasonic

Panasonic BMED500 - CAMERA CONTROL UNIT User manual

Panasonic

Panasonic WX-CC411A User manual

Panasonic

Panasonic INDUSTRY PAN9028 Quick setup guide

Panasonic

Panasonic AWRC600P - REMOTE CONTROL UNIT User manual

Panasonic

Panasonic SF-C21 User manual

Panasonic

Panasonic INDUSTRY PAN9028 User manual

Panasonic

Panasonic AJEC3 - EXTENSION CONTROL UNIT User manual

Panasonic

Panasonic CF-BAX04GU User manual

Panasonic

Panasonic PAN1781 User manual

Panasonic

Panasonic CZ-RCC5 User manual

Panasonic

Panasonic FP-XH M8N16PD User manual

Panasonic

Panasonic AG-EC4G User manual

Panasonic

Panasonic AJ-WM50E User manual

Panasonic

Panasonic PAN1326C2 User manual

Panasonic

Panasonic SF-C14EX-01 User manual

Panasonic

Panasonic AK-MSU1000G User manual

Panasonic

Panasonic Photovoltaic Module HIT VBHN SJ25 Series User manual

Panasonic

Panasonic WVPS154 - CAMERA DRIVE UNIT User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual