Panasonic AV-HS04M5 User manual

FRANÇAIS DEUTSCH ENGLISHITALIANOESPAÑOL

РУССКИЙ

日本語

Before operating this product, please read the instructions carefully and save this

manual for future use.

Operating Instructions

DVI/Analog Output Board

Model No. AV-HS04M5

VQTB0315-4

FJ1107TY5062 -FJ

Printed in Japan

1 (E)

indicates safety information.

Safety precautions

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPARATUS TO RAIN OR MOISTURE.

• THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING

AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL

BE PLACED ON THE APPARATUS.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING

INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER CHANGES OF

SWITCH SETTINGS INSIDE THE UNIT TO QUALIFIED SERVICE PERSONNEL.

ENGLISH VERSION

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(service) instructions in the literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

2 (E)

ENGLISH

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

For CANADA

FCC Note:

This equipment has been tested and found to comply with the limits for a class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Warning:

To assure continued FCC emission limit compliance, the user must use

only shielded interface cables when connecting to external units. Also, any

unauthorized changes or modifications to this equipment could void the user’s

authority to operate it.

indicates safety information.

Safety precautions

3 (E)

indicates safety information.

Safety precautions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer's instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose

of the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding-type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord form being

walked on or pinched particularly

at plugs, convenience receptacles,

and the point where they exit from

the apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

12) Use only with the cart,

stand, tripod, bracket,

or table specified by

the manufacturer, or

sold with the apparatus.

When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from tip-

over.

13) Unplug this apparatus during

lightning storms or when unused for

long periods of time.

14) Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as power-supply cord or plug is

damaged, liquid has been spilled

or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

Read these operating instructions carefully before using the unit. Follow the safety

instructions on the unit and the applicable safety instructions listed below. Keep

these operating instructions handy for future reference.

IMPORTANT SAFETY

INSTRUCTIONS

4 (E)

ENGLISH

Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households)

This symbol on the products and/or accompanying documents means that used

electrical and electronic products should not be mixed with general household

waste.

For proper treatment, recovery and recycling, please take these products to

designated collection points, where they will be accepted on a free of charge

basis. Alternatively, in some countries you may be able to return your products to

your local retailer upon the purchase of an equivalent new product.

Disposing of this product correctly will help to save valuable resources and prevent any

potential negative effects on human health and the environment which could otherwise arise

from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection

point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national

legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for

the correct method of disposal.

Safety precautions

Importer’s name and address of pursuant to EU rules:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

5 (E)

Contents

Safety precautions ......................... 1

Introduction ..................................... 5

Accessory ....................................... 5

Precautions for use ........................ 6

Name of each part .......................... 7

Mounting ......................................... 8

Connections .................................. 11

Appearance ................................... 12

Specifications ............................... 13

Introduction

When this board is installed in the AV-HS400AN/AE (or AV-HS400N/E) multi-format live

switcher, it enables one DVI-I output line and one analog output line to be supported.

Any of five signals (PGM, PVW, AUX, KEYOUT and multi view display) can be selected

as the output signals of each of the two lines.

Accessory

Operating instructions .................. 1

6 (E)

ENGLISH

Precautions for use

pHandle carefully.

Do not drop the product, or subject it to strong shock or vibration.

pUse the product in an ambient temperature of 0 °C to 40 °C

(32 °F to 104 °F).

Avoid using the product at a cold place below 0 °C (32 °F) or at a hot place above

40 °C (104 °F) because extremely low or high temperature will adversely affect the

parts inside.

pPower off before connecting or disconnecting cables.

Before plugging or unplugging the cables, be sure to switch power off.

pAvoid humidity and dust.

Avoid using the product at a humid, dusty place because much humidity and dust will

cause damage to the parts inside.

pWhen the product is to be discarded

When the product is to be discarded at the end of its service life, ask a specialized

contractor to dispose of it properly in order to protect the environment.

7 (E)

Name of each part

DVI-I

PbY DVI / ANALOG OUTPUTS



DVI-I output connectors [DVI OUTPUTS]

When connected to the SLOT1 option output connector: OUTPUT3

When connected to the SLOT2 option output connector: OUTPUT5

Analog output connectors [ANALOG OUTPUTS]

When connected to the SLOT1 option output connector: OUTPUT4

When connected to the SLOT2 option output connector: OUTPUT6

Setting switches

Switch No. Off On Factory setting

1I/P conversion mode Moving image

priority Still image priority Off

Reserved

— — Off

3 — — Off

4 — — Off

5 — — Off

6 — — Off

7 — — Off

8 — — Off

Use switches No. 2 to 8 at the “off” (factory setting) position.

Setting the I/P (interlace/progressive) conversion mode:

Set the priority mode when converting video signals to DVI signals.

When converting to DVI signals, the frame rate will change signiﬁcantly from 50 Hz to 60 Hz

with the 1080/50i, 720/50p and 576/50i system formats: This means that conversion may not be

performed smoothly for moving images.

8 (E)

ENGLISH

Mounting

Install this board in the multi-format live switcher AV-HS400AN/AE (or AV-HS400N/E).

Note:

When installing this board to the AV-HS400N/E, the AV-HS400N/E system must be

upgraded to version 1.03.00 or higher.

Consult with your dealer about updating the system version.

<Notes>

pBe sure to ask the store or dealer where you purchased the product for assistance

with mounting and removal.

pSet to OFF and unplug the power connector before mounting and removal.

pBefore handling this board, touch a metal part of the AV-HS400AN/AE (or AV-HS400N/E)

to discharge the static electricity from the human body.

An anti-static wrist strap is recommended for safety. Failures may be caused if you

touch this board while you are still charged with static electricity.

pBefore installing this board, keep the metal parts of this board free of contact with

other metal parts.

Be sure to mount the blank panel installed with the AV-HS400AN/AE (or AV-HS400N/E),

after removing this board.

pWhen installing or removing this board, take care not to hurt yourself on the edges

and metal parts of the boards.

Turn off the power of the AV-HS400AN/AE (or AV-HS400N/E), and unplug the power

cord.

Loosen the two screws of SLOT1 or SLOT2 on the output side at the rear of the

AV-HS400AN/AE (or AV-HS400N/E), and remove the blank panel.

Screw

Blank panel

Screw

SLOT2

SLOT1

9 (E)

Mounting

Align the board with the guide rails, and insert it slowly.

Insert it all the way in. Take care not to use force to insert the board because the

connectors may be damaged in the process.

Attach the board using the two screws.

Screw

After connecting the necessary cables, plug in the power cord, and turn on the power.

Other manuals for AV-HS04M5

Table of contents

Languages:

Other Panasonic Computer Hardware manuals

Panasonic

Panasonic MANV250GE User manual

Panasonic

Panasonic TY-42TM6D - Monitor Terminal Expansion Board User manual

Panasonic

Panasonic AJ-YAD250 User manual

Panasonic

Panasonic MAS3795E User manual

Panasonic

Panasonic 2SC2295 User manual

Panasonic

Panasonic 2SB1463G User manual

Panasonic

Panasonic MN101L Series User manual

Panasonic

Panasonic 2SC4627G User manual

Panasonic

Panasonic 2SC4656G User manual

Panasonic

Panasonic MICROCOMPUTER MN103S User manual

Panasonic

Panasonic AV-UHS5M6G User manual

Panasonic

Panasonic 2SB1320A User manual

Panasonic

Panasonic 2SB1679 User manual

Panasonic

Panasonic ERB RD User manual

Panasonic

Panasonic AW-360B10 User manual

Panasonic

Panasonic 2SA1790G User manual

Panasonic

Panasonic 2SC1318A User manual

Panasonic

Panasonic TY-FB10HMD - Monitor Terminal Expansion... User guide

Panasonic

Panasonic CZ-CBPCC2 User manual

Panasonic

Panasonic ET-MDN12G10C User manual

Panasonic

Panasonic 2SA1739 User manual

Panasonic

Panasonic CF-BAM1024U User manual

Panasonic

Panasonic CF-VEB071 User manual

Panasonic

Panasonic 2SC2631 User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual

Advantech

Advantech ASMB-935 Series user manual